• 한국농촌건축학회논문집
• /
• 제16권4호
• /
• pp.75-81
• /
• 2014

In this study, we have intended to provide the related construction manuals with technical materials and to reduce the defects in the on-site construction, with reviewing the adhesive properties of joint parts according to change of temperature and speed of hot-air sealer for the products that have been made of polyvinyl chloride(PVC) materials in the single waterproof sheet. The result from the experiment is shown as following. 1) Bond strength was shown as high as the welding speed became slower. For the hot-air welding velocity with 3~6m/min, a stable bond strength has been shown in the range of the hot-air welding temperature with $175{\sim}210^{\circ}C$, while it has been shown in the range of the hot-air welding temperature with $210^{\circ}C$, when the hot-air welding velocity is between 9~12m/min. 2) If the hot-air welding temperature is lower, the adhesive strength has been shown as higher in the section where the hot-air welding velocity is low, while the adhesive strength has been also shown as higher in the section where the velocity is fast as the hot-air welding temperature becomes higher. The highest bond strength has been shown in the velocity with 3m/min for the hot-air welding temperature with $140{\pm}10^{\circ}C$, which is rather low. At $175{\pm}10^{\circ}C$, a high bond strength has been shown in the velocity with 3~6m/min, while the high bond strength has been shown in the velocity with 6~9m/min at $210{\pm}10^{\circ}C$.

• 한국건설순환자원학회논문집
• /
• 제3권3호
• /
• pp.212-219
• /
• 2015

본 연구는 시트-도막 복합방수공법에서의 고질적인 접합부 파단 하자를 해결하기 위한 목적으로 고안한 접합부 2면 접착을 통한 분리거동 유도 기술의 적용에 있어 기술의 유효성 및 성능검증을 목적으로 진행하였다. 이를 위해 비교 시험군으로서 3면 접착 기술이 적용된 I형 접합부를 선정 및 제작하여 연구 대상 기술과 인장성능 및 신장률 평가를 진행하였다. 평가 결과, 3면 접착방식의 비교 시험군 접합부의 인장강도의 경우 14.2N/mm 신장률 335%로 확인되었고, 본 연구 대상인 분리 거동형 접합부의 경우 인장강도는 13.8N/mm 신장률 587%로 확인되었다. 이러한 결과는 3면 접착방식의 경우, 모든 재료가 구속되어있는 형태로 구성되어 있음에 따라 강도적 측면에서 본 연구 대상에 비해 높은 결과가 나온 것으로 판단하였다. 또한 본 연구대상인 분리 거동형 접합부의 경우, 인장응력 및 변위가 발생하였을 때 무절점 인장응력(Zero-span tension)이 발생하지 않음에 따라 하부 시트층과 상부 도막층이 동시에 파단되지 않고, 하부 시트층과 상부 도막층이 분리거동 신축부재에 의해 분리되면서 하부 시트층 부터 순차적으로 1차 파단되고, 변위 허용 구간에 들어서면서 상부 도막층이 본연의 신축성을 나타내며, 지속적인 변위를 나타내다가 일정 변위 구간에서 2차적으로 파단되는 특성을 나타내는 것을 확인할 수 있었다.

• 터널과지하공간
• /
• 제26권3호
• /
• pp.212-219
• /
• 2016

뿜칠 방수 멤브레인은 숏크리트 사이에 시공되어 라이닝 크랙을 통한 누수를 방지하는 목적으로 최근 유럽 국가를 중심으로 시공 사례가 늘어가고 있다. 뿜칠 방수 멤브레인은 방수 시트에 비해 복잡한 단면에도 시공이 용이하기 때문에 이용 사례가 늘어갈 것으로 전망된다. 뿜칠 방수 멤브레인은 폴리머로 구성된 재료로서 투수성이 매우 낮지만 수분의 이동에 의해 포화가 되고 이로인해 콘크리트 재료에 간극수압이나 동결 문제를 일으킬 수 있는 우려가 있다. 본 연구에서는 뿜칠 방수 멤브레인의 수분이동과 계절변화를 고려하여 숏크리트 라이닝의 열-습도 전달 장기 해석을 수행하였다. 해석을 통해 뿜칠 방수 멤브레인의 수분 흡수 작용과 수분 이동으로 인한 상대습도 변화를 고찰할 수 있었으며 이로 인한 장기적 변화를 모사할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.31-34
• /
• 2006

In this study on the appliable Asphalt sheet of monolithic and inorganic matter waterproofing material using of field because of problem of complex waterproofing sheet. Before this cement polymer modified waterproof coating and appliable asphalt sheet of monolithic whether have stability by method of construction about all style waterproofing that evaluate to new method of construction development naturally big emphasis put and try to approach. Did performance test item first at, as a result, drew by suitable thing in all KS items. This is considered to have more effective spot construction work because if means that have stability by material as well as method of construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.649-652
• /
• 2006

The exist waterproofing membrane cause not to assure proper thickness in constructing. It become a serious problem which as decreasing of durability, waterproofing membrane to be tom and break down. Therefore, it is necessary that the expert have to construct waterproof works,, if not, it can be frost and thawing or chemical corrosion called one of the reason in maintaining the safety of concrete structure. In summarize, for this paper, it would be understand that exposed and compound experimental study of waterproofing sheet using coat material filling into the protuberance to improve the durability for concrete structure can widely apply to field to solve the these significant problem.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.111-114
• /
• 2011

Waterprooping Method with sheet need to study technology and multilateral verification considering the arctic conditions as low temperature and humidity, which is the result only considered of material aspects without environmental condition in construction But there are no measures up until now. To solve this problem by using high frequency induction heating method developed waterproof sheets, cold (5 ℃ or less) can be applied in a more stable environment, water-resistant materials and construction methods were studied for development. The results of the test showed that high frequency induction heating method is effective for usability in low temperature condition and securement of proper quality than existing Waterprooping Method with sheet need.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.229-230
• /
• 2019

Integrated water-soluble film is dissolved in the rubber asphalt waterproof sheet to secure adhesive strength on freshly cast concrete on the adhesion side of waterproofing layer on the floor slab. In addition, in order to determine whether the water in the concrete slurry can dissolve the water-soluble film sufficiently, the adhesive strength of the waterproofing sheet was compared between difference wetness condition at the upper part of the concrete specimen before the concrete casting.

• 한국건축시공학회지
• /
• 제2권1호
• /
• pp.139-146
• /
• 2002

This study deals with the characterizing and the application like as insulation materials in the joint part in concrete surface layer and waterproofing sheet especially for roof slabs. Using steel materials and butil-rubber tape to band waterproofing sheet and concrete surface together before this waterproofing system will be applied. It can be expected to both the curability and the watertightness by coating poly-urethane 2 or 3 times with sheet surface. Therefore this waterproofing system can be possible to protect water without the damage when vapor is going out from concrete and without air pockets because of the difference temperature inside and out. This system particularly consists of air bents and elastic waterproofing sheet considering the physical damage while water can cause purely physical damage. This system is one of the most efficient ways of waterproofing system without air pocket.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.107-108
• /
• 2018

In this study, we applied the fiber sheet made by the stitch bonding method, which is a structure in which transverse yarns and double yarns are crossed by applying the principle of sewing knitting without the use of adhesive, The tensile strength of the reinforced concrete structure was investigated. As a result of the tensile strength test of each specimen, the specimen to which the fiber sheet produced by the stitch bonding method was applied exhibited the highest tensile strength among the three types of specimens, and the fiber sheet produced by the needle punching method exhibited the lowest strength. In addition, the stitch - bonded fiber sheet showed a difference of strength of 0.1N / mm for both length and double - sided strength difference.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.17-20
• /
• 2006

It often happen water leakage that roof membrane have a poor condition such as direct exposed to rain, ultraviolet lays, temperature change compare with other part of waterproofing. There are difficult to maintain the quality of waterproofing and durability due to use only few waterproofing materials in practical in spite of development and use the various waterproofing material as solution of these poor condition. Therefore, in this thesis, I would like to know the property to apply field and suggest other method to develop for this waterproofing method to adopt various field condition for roof tops, as searching exposed and complex waterproofing technology for roof tops which is reinforced sheet using rising system have a regular pitch, depth, space.