• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.4
• /
• pp.361-370
• /
• 2003

In this study, the performance of water tightness of water expansional sealing material and gasket was evaluated. The water tightness test was performed varying the type of inner pressure condition, for which the water expansional sealing material was inundated for 5 days to evaluate the ability of water tightness. In order to carry out this test, we made use of two types of water expansional sealing material; general type and combined type with non-expansional rubber. In the case of gasket, EPDM gasket and complex gasket sticked to the water expansional sealing material were applied. The performance of water tightness depended on the construction defect and the deformation of segment. The construction defect and segment deformation were generally expressed by gap and offset of the construction joint. The results, of tests showed that the performance of water tightness was largely influenced by the gap between segments. Management criteria of gap and offset were proposed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.267-274
• /
• 2017

This study discusses the applicability of environmental friendly EVA based butyl rubber self-adhesive waterproof sheet designed to prevent corrosion of large scale pipes used in the water treatment facilities during th water treatment process. The experiments conducted tested the waterproofing sheet's adhesion strength on the steel surface of the pipes and checked for whether the material has the proper response properties against the various environmental conditions. In addition, it the sheet adhered to the steel pipe was to see if the adhesion hold against the water pressure due to the ingress of inflow water. Finally, the waterproofing sheet's adhesion strength was tested on a rusted steel surface to confirm whether the material has the necessary properties to secure stable adhesion strength and prevent corrosion of steel pipes at the same time during the process of installation or maintenance. As a result, the self-adhesive waterproof sheets showed that all attachments in the untreated, long term pressuring, immersion in chemical substance (hydrochloric acid, hypochlorous acid, sodium hydroxide), low temperature ($-20^{\circ}C$) conditions showed a adhesion performance of higher than 1.5N/mm, which is the performance standard of KS F 4934. Also, in the testing to check for the adhesion property against inverse water pressure, it was observed that the adhesion failure did not occur even up to $3.0N/mm^2$ pressure. Also, in the process of assessing the adhesion performance on rusted steel surface, specimens after 12 hours of corrosion treatment was shown to have 2.1N/mm, and specimens after 168 hours of corrosion treatment was shown to have 2.0N/mm adhesion strength performance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.621-621
• /
• 2012

기존의 수력발전방식은 물의 위치에너지를 이용하므로 적합한 입지가 제한된다. 그러나 수류에너지를 이용한 발전방식은 기존의 수력발전과는 달리 물의 운동에너지를 이용하기 때문에 입지에 제한이 적으며, 물은 밀도가 크기 때문에 작은 유속으로도 많은 에너지를 생산할 수 있고,댐을 필요로 하지 않으므로 하천생태계 및 환경에 영향을 주지 않는 장점이 있다. 따라서 하천 뿐 아니라 기존 물관련시설의 미활용 방류수를 이용할 수 있으므로 수력잠재량이 매우 크다. 본 연구에서는 다목적댐 방수로의 수류에너지잠재량 산정을 위하여 유역면적이 $6,648km^2$이고 연평균 방류량이 약 $66.770m^3/s$인 충주댐을 선정하였다. 분석결과 충주 다목적댐의 방수로를 이용한 수류에너지 잠재량은 연간 약 373,687kWh로 산정되었다. 향후 하천생태계와 환경에 영향을 주지않는 재생에너지원으로서의 수류에너지 이용은 미활용 에너지의 적극 활용 측면과 미래전력 수요에 대한 중요한 원천으로써 재고되어야 할 것이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.68-74
• /
• 2014

Recently, concrete facility as advanced water treatment facilities is extending in the water treatment facilities according to raise awareness of pure drinking water and delicious water. For this reason, it is increased to the necessity need to make the standard and the development of waterproofing and anti-corrosion materials for concrete structures applied water treatment tank. So, related research has become active recently. However, as the limit of research focused on durability improvement of top coating material, it is insufficient to study on the adhesion strength between the concrete surface and primer. Therefore, there is to confirm the adhesion of between concrete surface and the three primers used as anti-corrosion waterproofing materials, and to investigate the properties of adhesion strength according to the condition such as dry condition, wet condition, and water pressure condition of the concrete surface in this study.

• Fire Science and Engineering
• /
• v.27 no.1
• /
• pp.52-59
• /
• 2013

In this study, tests were conducted to establish a fire engine of relay waterproof and utilization in order to maintain the pressure in a situation that require high-pressure water-resistant such as a high-rise building fire, etc. As a result of test on the change of a relay waterproof pressure, the measurement result with the hydrant intake of a fire engine opened has reduced approximately 20 % compared to the measurement result with the hydrant intake closed. Similar efficiency showed in the test result that change the pressure of 2 fire engines respectively to use them more efficiently at a fire fighting activity site. A fire engine operation and utilization is proposed based on this study result in order to cope effectively with a fire site requiring high-pressure stream in a high-rise building fire, etc. by using a fire engine held at present because there is no fire pump with high-pressure stream ability arranged at the fire station and there is no regulation on high-pressure fire-fighting pumps in a type approval and verification technology criterion for a fire engine.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.660-663
• /
• 2008

방수로는 본류의 첨두홍수량을 분담하여 대상 지역의 홍수피해가능성을 줄이기 위해서 도입되는 구조적 홍수방어대책의 하나로 특히 도시화로 인하여 기존 하천 유역의 저류 능력이 감소하여 홍수 시 유출량이 증가함에 따라 방수로의 필요성은 점차 늘어나고 있다. 외국의 경우에는 이미 대표적인 구조적 홍수방어대책으로 활용되어 그 효과가 이미 확인되어 있다. 방수로로 분담되는 유량은 일반적으로 방수로 유입부에 설치되어 있는 횡월류위어의 월류량을 정확히 산정함으로써 알 수 있다. 따라서 방수로의 홍수방어능력을 알기위해서는 이러한 유입부 횡월류위어의 월류량을 정확히 평가하는 것이 중요하다. 횡월류위어의 형태는 여러 가지가 있지만 가장 기본적인 형태로 예연위어 형태와 광정위어 형태가 있다. 본 연구에서는 그 중에서 광정횡월류위어(broad-crested side weir)을 대상으로 실제 하도와 유사한 흐름 조건을 가지도록 상대적으로 작은 횡월류위어길이(L)와 본류 폭(B) 비(L/B)를 가지는 실험 수로를 이용하여 광정횡월류위어에 대한 실험을 수행한 후 유량 계수를 산정하여 본류 흐름 조건 및 횡월류위어 제원 변화에 따른 영향을 검토하였다. 광정횡월류위어에서의 유량계수도 기본적으로 예연횡월류위어와 동일한 방식을 이용하여 검토할 수 있으며, 동일한 주요 영향 변수를 포함하지만, 위어 폭 W가 횡월류위어의 월류 유량과 본류 유황에 영향을 미치게 된다. 따라서 본 연구에서는 광정횡월류위어의 특성에 따른 산정된 유량계수의 변화에 초점을 두어 분석을 수행하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.279-280
• /
• 2018

The waterproofing material can be roughly divided into a coating material and a sheet waterproofing material. In the case of coating waterproofing materials, sheet waterproofing materials, which are easy to use in terms of workability and quality control, have been recently used because of their incomplete use of coating thickness, long curing time and poor blending due to in situ blending. However, in the case of the sheet waterproofing material, since the sheet overlapping portion is inevitably generated, various defects (breakage due to the behavior) are frequently observed. Therefore, it is imperative to establish fundamental measures to minimize this.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.220-221
• /
• 2019

At a time when the recent earthquake in Pohang, Korea requires the need for seismic performance design not only for concrete structures but also for construction materials used in construction structures, the possibility of applying the seismic performance design of waterproof materials constructed in the form of direct or partial adhesion to concrete structures in the underground Single-side walls section was confirmed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.2
• /
• pp.122-131
• /
• 2015

The purpose of this study is to understand the necessity for waterproofing and corrosion-resistant technique application on concrete water tank used in water supply. Relevant research materials and regulation were collected, reviewing for the case studies of sample structures aged over 20 years, and experimental studies on chloride conduction for the high performance concrete and penetration properties of water repellency of liquid type materials. The result is that the concrete water tank in the water supply is needed for waterproofing and corrosion-resistant material coating to maintain long term durability due to the constant environmentally induced degradation deterioration often caused by chloride attack.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.7-12
• /
• 2008

We constructed Seal type waterproofing with adhesive and swelling properties in the field of construction work as yet. But we have many problems of seal type waterproofing with adhesive and swelling properties for construction. Because it has high viscosity, so wokers are too adhered for the work. So, we developed and applied about the high temperature and spray equipments of piston type better than before. We able to be expect that cost reduction and increase construction ability by high temperature and spray equipments of piston type.