• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.872-878
• /
• 1995

방사성폐기물 드럼내에 포함되어 있는 방사성 핵종의 양이 핵종분석장치로 측정할 수 있는 검출 하한치 이하이거나, 혹은 너무 높아 불감시간이 크게 증가될 경우에는 순수 Ge 검출기를 장착한 핵종분석장치로는 분석이 불가능하게 되므로 본 연구에서는 표면선량율과 Scaling Factor를 이용하여 드럼속에 포함되어 있는 핵종들의 양을 평가하는 방법을 제시하였으며, 불균일성이 높을 경우의 가능한 평가방법을 알아보기 위하여 점선원을 이용한 실험을 실시하였다. 그 결과 비균질 드럼에 대해서는 점선원을 이용한 자료를 이용하는 것이 합리적이고 기하학적 산술평균을 취함으로써 보다 정확도가 증가됨을 알 수 있었다. 그러나 그 오차범위는 -25%∼5.5%로서 실제보다 상당히 낮게 평가되는 경향이 있으므로 적절한 비균질성 보정인자를 적용할 필요가 있는 것으로 생각된다.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.260-268
• /
• 1995

국내 원자력발전소의 방사성폐기물 발생량은 초고압 압축, 농축폐액 건조, 페수지 건조 등의 폐기물감용을 위한 운영계획이 수립되고 또한 일부 원자력발전소에서는 1995년부터 운영이 시작될 예정이어서 감소가 예상되고 있다. 원자력발전소로부터 방사성폐기물의 누적량은 2035년까지 운영자의 폐기물 감용 계획을 고려한다면 141,920 드럼으로 예상할 수 있고, 이에 상응하는 방사능량은 반감기가 한달 이상인 30개 핵종에 대하여 방사성 붕괴를 무시할 때 49,390 Ci였다. 특히 원자력환경관리센터에서 수행한 개념설계에 따른 1차 건설예정의 지하 처분동굴의 적재량인 약 10만 드럼은 2014년까지 누적량으로 채울 수 있고 이때 처분장의 장기적 성능평가에 주요 고려 대상인 반감기가 5년 이상의 14개 핵종에 대한누적 방사능량은 약 13,577 Ci였다. 이 예측된 발생량과 재고량은 처분장 장기적 성능 및 안전성 평가에 중요한 기초자료가 될 것이다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.403-404
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.424-425
• /
• 2009

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.189-203
• /
• 2008

The physical and chemical properties of radioactive waste drums, which have been temporarily stored on site, should be characterized before their shipment to a disposal facility in order to prove that the properties meet the acceptance guideline. The investigation of NDT(Nondestructive Test) method was figured out that the contents in drum, the quantitative analysis of free standing water and void fraction can be examined with X-ray NDT techniques. This paper describes the characteristics of X-ray NDT such as its principles, the considerations for selection of X-ray system, etc. And then, the waste drum characteristics such as drum type and dimension, contents in drum, etc. were examined, which are necessary to estimate the optimal X-ray energy for NDT of a drum. The estimation results were that: $(R)\acute{A}$ the proper X-ray energy is under 3 MeV to test the drums of 320 ${\beta}\S$ and less; $(R)\ddot{E}$ both X-ray systems of 450 keV and/or 3 MeV might be needed considering the economical efficiency and the realization. The number of drums that can be tested with 450 keV and 3 MeV X-ray system was figured out as 42,327 and 18,105 drums (based on storage of 2006. 12), respectively. Four testing scenarios were derived considering equipment procurement method, outsourcing or not, etc. The economical and feasibility assessment for the scenarios was resulted in that an optimal scenario is dependent on the acceptance guide line, the waste generator's policy on the waste treatment and the delivery to a disposal facility, etc. For example, it might be desirable that a waste generator purchases two 450 keV mobile system to examine the drums containing low density waste, and that outsourcing examination for the high density drums, if all NDT items such as quantitative analysis for 'free standing water' and 'void fraction', and confirmation of contents in drum have to be characterized. However, one 450 keV mobile system seems to be required to test only the contents in 13,000 drums per year.

• Journal of Radiation Protection and Research
• /
• v.22 no.4
• /
• pp.309-317
• /
• 1997

The measured radioactivity of gamma-emitting radionuclides in each radioactive waste drum using the non-destructive waste assay method is underestimated than real radioactivity in radioactive waste drum because the gamma-rays are attenuated within the medium. Therefore, the measured radioactivity should be corrected for the attenuation of gamma-rays. For the correction of the attenuation of gamma-rays, the attenuation correction method should be applied differently by considering the distribution and density of medium in radioactive wastes drum generated from nuclear power plants. In this study, the model drums were fabricated for simulating five types of radioactive waste drums generated from nuclear power plant and the optimum methods of the attenuation correction were experimentally determined to analyze the activity of radionuclides in the waste drum accurately using the segmented gamma scanning system. With the determination of the attenuation correction methods from the experimental results the transmission method and the average density method for the miscellaneous waste drum, the transmission method and the differential peak absorption method for the shielded miscellaneous waste drum were used to measure the density of medium in waste drums. Also, the average density method and the differential peak absorption method for the spent resin drum, the paraffin solidified drum, and the spent filter drum were used.

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.416-422
• /
• 1990

현재 추진중인 중,저준위 방사성폐기물 영구 처분장은 현시점에서 적용중인 처리기술외에는 더 이상의 기술개발을 고려치 않고 폐기물 발생량을 추정하여 이를 근거로 하였는데, 당 연구소에서 개발중인 감용처리기술이 적용된다는 가정아래 향후 방사성 폐기물 관리계획을 검토하였다. 국내에서 발생되는 방사성 폐기물의 대부분을 차지하는 원자력 발전소 운전으로 인해 발생되는 폐기물에 대해서만 감용처리기술을 적용해도 해체폐기물이 본격적으로 발생되는 2018년 이전까지는 그 발생량이 55%까지 감소함을 알 수 있었다. 따라서 초기건설용량 25만 드럼규모의 처분장에 대해 그 운영기간은 7년이상 연장할 수 있을 것으로 예상되었다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.2
• /
• pp.117-123
• /
• 2012

In order to dispose of the LILW(low and intermediate level radioactive waste) stored at KAERI, the radwaste drum assay system will be introduced to evaluate the radioisotopes inventory of stored drums. At present, the construction project of the dedicated assay facility to operate it and carry out routine maintenance of that equipment has been conducting at the radwaste treatment facility. Since that facility will be constructed in front of a 1st radwaste storage facility as well as the radwaste drums to be assayed and the transmission source in the radwaste drum assay system are in that facility, they could act as the radioactive sources and then, would affect the dose rate at the inside and the outside of the facility. Therefore, the radiation shielding should be evaluated through the concrete wall near to the radioactive sources whether the wall thickness is sufficient against the regulations. In this study, the radiation safety for the concrete wall around the radiation controlled area in the radwaste drum assay facility was evaluated by the MCNP code. From the evaluation results, the thickness of those concrete walls which are under consideration of about 30 cm was enough to shield the radiation from the radioactive sources.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.06a
• /
• pp.57-57
• /
• 2006

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.11a
• /
• pp.159-161
• /
• 2007