• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.110-123
• /
• 2008

The use of CCA as a wood preservative was recently inhibited due to its environmental pollution and human harmfulness. Instead of CCA, copper azole (CuAz) and alkaline copper quaternary (ACQ) have been used as alternative wood preservatives, but the price of the preservatives is much more expensive than that of CCA. As a substitute for high-priced CuAz and ACQ, environmentally friendly wood preservatives were formulated with okara, which is an organic waste from the production of tofu. Prior to formulating the preservatives, okara was hydrolyzed by three levels of sulfuric acid concentration (1, 2.5 and 5%) to easily penetrate the effective components of the preservatives into wood blocks. Final preservative solutions were formulated with the hydrolyzed okara and metal salts, such as copper sulfate, copper chloride and borax. The preservatives were treated into wood blocks by vacuum-pressure method to measure the treatability of the preservatives, and the treated wood blocks were placed in hot water for three days to measure the leachability of the preservatives. The effective components of the preservatives might be successfully penetrated into wood blocks through the uses of hydrolyzed okara and ammonia water. However, the leached amount of effective components was increased as the concentration of acid used for the hydrolysis of okara increased. The treatability and leachability of the preservatives were not affected by hydrolysis temperature but negatively affected by the addition of borax. Based on the results above, the optimal conditions for formulating okara-based wood preservatives cost-effectively and environmentally might be 1% acid hydrolysis of okara and the use of $CuCl_2$ as a metal salt. In addition, the treatability and leachability of okara-based wood preservatives were superior or no differences comparing with those of CuAz. Therefore, it is concluded that okara-based wood preservatives might have a potential to be used as an environmentally friendly wood preservative.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.43-49
• /
• 2005

Recently, according as people who have sensitive skin increase, we've been giving more importance to the safety of cosmetics. Especially, preservative is known to be one of the main stimuli which cause side-effects of cosmetics. However, there have been few reports describing cell cytotoxicity, skin penetration, oil-aqueous phase partition, anti-microbial activity of preservatives and their correlation with skin irritation. The study is aimed to develop low irritable preservative system with phenoxyethanol, one of the most commonly used preservatives in cosmetics, considering various factors mentioned above. According to our results of cell cytotoxicity against human normal fibroblasts by means of MTT assay, phenoxyethanol showed the lowest cytotoxicity when compared to other preservatives tested (cytotoxicity: pro-pylparaben > butylparaben > ethylparaben > methylparaben > triclosan > phenoxyethanol), but human patch test for assessing shin primary irritation revealed that phenoxyethanol has higher skin irritation than methylparaben and triclosan. We performed in vitro skin penetration test using horizontal Franz diffusion cells with skin membrane prepared from hairless mouse (5 ${\~}$ 8 weeks, male) to evaluate the rate of skin penetration of preservatives. From the results, we found that the higher irritable property of phenoxyethanol in human skin correlates with its predominant permeability (skin penetration: phenoxyethanol > methylparaben > ethylparaben > propylparaben > butylfaraben > triclosan). Therefore, we made an effort to reduce skin permeability of phenoxyethanol and found that not only the rate of skin penetration of phenoxyethanol but also its skin irritation is dramatically reduced in formulas containing oils with low polarity. In the experiments to investigate the effect of oil polarity on the oil-aqueous phase partition of phenoxyethanol, more than $70\%$ of phenoxyethanol was partitioned in aqueous phase in formulas containing oils with low polarity, while about $70 {\~} 90\%$ of phenoxyethanol was partitioned in oil phase in formulas containing oils with high polarity. Also, in aqueous phase phenoxyethanol showed greater anti-microbial activity. Conclusively, it appears that we can develop less toxic preservative system with reduced use dosage of phenox-yethanol and its skin penetration by changing oil composition in formulas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.426-433
• /
• 2014

The high-altitude electromagnetic pulse(HEMP) generated by a high-altitude nuclear explosion. This paper presents the comparison of electric field penetration in Bell laboratories and IEC 61000-2-9 standard when HEMP source penetrates through Naval Warship conducted coupling path and radiated coupling path. Also we analyze the effects of two kinds of coupling and propose Protective measures. Simulation results confirm IEC 61000-2-9 standard is more strict than the Bell Laboratories standard except for a lower frequency band, so we proposed IEC 61000-2-9 standard as a Naval HEMP standard. Finally, we offer the protective measures such as the shielding coating, Honeycomb ventilation, TVS in order to meet the military criteria.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.56-61
• /
• 2023

The plant is an important facility as a infrastructure, and ensuring safety against possible accidents such as gas leaks and explosions must be considered in the design. However, there is little study on explosion pressure in plants for reasons such as economic feasibility, and overpressure data on this field is insufficient. In this study, an experimental design plan considering the explosion scenario that may occur in the plant was presented, and the explosion pressure was confirmed through an explosion experiment. Hydrogen-methane mixed gas was used as a combustible material, and the effect of confinement and congestion on overpressure was studied. The effect of overlapping pressure waves during deflagration and the turbulence effect by congested pipes are discussed. The results of this study can be used as input data in various safety designs.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.716-725
• /
• 2016

In this study, MCQ (Micronized copper Quat) which was copper-based wood preservative, was investigated on decay properties by difference of the its infiltration volume. After pressure-treatment with different MCQ concentration, test specimens (Japanese Red Pine) were exposed by a brown-rot fungus (Fomitopsis palustris). At the end of the 12 weeks exposure to the fungus, untreated specimen was showed the mass loss of more than 35%, and the value of preservative effectiveness of MCQ by indoor decay was $3.99{\pm}0.42kg/m^3$. Therefore, MCQ should be pressure-injected at least $3.99kg/m^3$. The three dimensional of the specimens were observed by using the light microscope and scanning electron microscope, Untreated and treatment specimens with low concentration generally had underwent serious decays and had a lot of fungal hyphae. Howere, the formation of bore hole by hyphae were not observed. Mass loss and decay properties of specimens were affected by amount of MCQ injection. Therefore, it is necessary to the review of the adequacy of the MCQ injection amount in domestic environments.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.487-498
• /
• 1998

This study was conducted to investigate changes of airway size, tongue and hyoid position following orthognathic surgery in mandibular prognathism, and how they are adapted to new environment in time dependent manner. 37 patients, who had recieved orthognathic surgery, were selected for this study. lateral cephalogram of each patient was taken at preoperation, immediate postoperation, and over 6 month after operation, and were traced and analyzed The findings of this study were as follows : 1. The size of airway was not changed at PNS and Epiglottis level after operation, but it was changed slightly at 2nd cervical vertebra level. 2. The hyoid was moved inferoposteriorly at immediate postoperation, and then it shifted toward preoperative position, but it remained slightly inferoposterior position. The distance from hyoid to genial tubercle decreased continuously. 3. The position of tongue was moved inferoposteriorly at immediate postoperatioa and then it shifted toward preoperation position, but the root of the tongue remained inferoposteriorly. 4. The distance between tongue and hyoid was increased at immediate postoperation and slightly decreased during follow-up period. 5. The change of the mandibular position was not significantly correlated with changes of airway size, hyoid position, tongue morphology and tongue position.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.112-121
• /
• 2015

In this study, Copper Azole (CuAz), a domestically available wood preservative for pressure treatment, was employed to perform an experimental research on its infiltration and decay properties in Japanese Red Pine. Test specimens were pressure-injected with CuAz-2 preservative to measure its preservative effectiveness, and then its impact on weight and mass losses. Furthermore, wood specimens were treated with CuAz-2 preservatives of various concentration levels before they were decayed with brown-rot-fungi in order to observe decay properties on light microscope (LM) and field emission scanning electron microscope (FE-SEM). As a result, untreated specimen by Fomitopsis palustris showed the mass loss of more than 40%, and the value of preservative effectiveness of CuAz-2 by indoor decay was $1,73-3.32kg/m^3$. The concentration levels of CuAz-2 preservative were shown to cause significant variations in terms of decay progresses in the cross section, radial section, and tangential section. By contrast, untreated specimens had underwent serious decays in early wood, late wood, longitudinal resin canals, and ray, which led to vertical destruction of wood texture. As for the radial section, ray tracheid, ray parenchyma cell, and window like pits were decayed and destroyed. In the case of tangential section, uniseriate rays and vertical resin canals were seriously decayed. In conclusion, this study indicates that the adequacy of the current CuAz injection amount should be reviewed in the domestic environment because there are significantly different decays at different decay conditions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.281-287
• /
• 2021

In this study, we analyzed the cosmetic applicability of extract from snow tea, native to Lijiang, Yunnan-province, China. After confirming the species as N. grossedentata through DNA analysis of Lijiang snow tea, experiments were conducted using representative tea, green tea, and a representative control group for each efficacy analysis. Both teas were extracted using 70% (v/v) ethanol aqueous solution. The polyphenol content in the Lijiang snow tea extract (gallic acid equivalent, 23.9 ± 3.2 mg/mL) was higher than that in green tea extract (16.4 ± 2.3 mg/mL). In contrast, the antioxidant (Radical scavenging, IC₅₀ 104 ㎍/mL), tyrosinase enzyme inhibitory (whitening agent, IC₅₀ 40.7 ㎍/mL), and Escherichia coli growth inhibitory (preservative) activities (IC₅₀ 2.85 mg/mL) were analyzed based on the solid content in the extract, and it was confirmed that the activities of Lijiang snow tea extract were superior to those of green tea extract (radical scavenging, IC₅₀ 234 ㎍/mL. It also showed similar efficacy to previously used active substances such as antioxidants (vitamin C, IC₅₀ 108 ㎍/mL), whitening agents (vitamin C, IC₅₀ 80㎍/mL), and preservatives (methylparaben, IC₅₀ 4.35 mg/mL). However, green tea was found to be better in collagenase inhibition activity (anti-wrinkle). Through this study, the cosmetic application potential of Lijiang snow tea is high.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.27-32
• /
• 2002

We investigated the effect of polyethylene glycol(PEG) treatment of preservative treated green japanese cedar(Cryptomeria japonica) round posts on their preservative penetration and check formation during the air drying. The round rods were dip-treated in 10% preservative solution of Basilit CFK for 1 day, followed by application(3, 5, and 10 times) with 50% PEG-400 solution, and then dried for 30 days under natural conditions. The rate of preservative penetration into sapwood was a low by 23.2% without PEG treatment, whereas that was a high by about 51.2~64.5% with PEG treatment. From these results, it was assumed that PEG played an affirmative role in the penetration of preservative components loaded onto the surface of round rods by dipping. During the air drying, the formation of drying checks decreased significantly with increasing application times of PEG. Even though some drying checks in PEG treated rods were developed, the number and size of checks was reduced remarkably by PEG treatment. After 2 months of outdoor exposure, PEG treatment failed to reduce checking in preservative-treated rods whereas finishing of polyurethane resin lacquer after PEG treatment was significantly effective in preventing check development.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.1
• /
• pp.15-22
• /
• 1992

This study was performed to investigate the corrosion of metal fasteners in waterborne preservative-treated wood. Of all the metal tested, steel exhibited the greatest amount of corrosion across all preservatives and exposure conditions whereas stainless steel was totally inert. Galvanized steel corroded at a much lower rate compared to steel and the corrosion of brass was negligible. Among the preservatives, CCA-Type B was the most corrosive system tested. The sequence for the average corrosivity across all metals was: CCA-type B>CCA-Type C${\geq}$ACC${\geq}$CCA-Type A. Across all metals and retentions the salt formulations were more corrosive than the oxide and the corrosion was increased with the increse in the amount of preservative loadings. The amount of corrosion was also increased with the increase in exposure relative humidity (RH) across all metals and presevatives However, at the 60% RH exposure condition, the corrosion of metals was very negligible. Consequently, it can be concluded that across all metals oxide-type preservatives should be used to prevent the corrosion problem of metal fasteners in contact with treated wood and the use of steel nail preservative-treated wood should be avoided without distinction of end-use location, i.e., exterior or interior, and the use of stainless steel or at least brass nail in damp exterior condition was strongly recommended.