• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1127-1137
• /
• 2000

Applications of lanthanum ion and crude rare earth chloride to the phosphate wastewater and fluorine wastewater, respectively, as treatment agents were studied. For the investigation of phosphate removal characteristics according to the amount of lanthanum ion, initial phosphate content was decreased by about 50% when molar ratio of [$La^{3+}$]:[$PO_4{^{3-}}-P$] was 0.25 and nearly all of phosphate was removed when the molar ratio of [$La^{3+}$]:[$PO_4{^{3-}}-P$] to be doubled. The removal of phosphate by $La^{3+}$ appeared to reach equilibrium state rapidly, and it was exothermic reaction since the removed amount of phosphate was diminished somewhat when the reaction temperature was increased. The zeta potential of combined particulate compound of lanthanum ion and phosphate was located for its isoelectric point at pH 5.5 and the turbidity of treated wastewater was found to vary according to the pH in a similar manner as the absolute value of zeta potential of the combined particulate compound did. For the treatment of fluorine wastewater by crude rare earth chloride, the remaining fluorine content after treatment decreased as the dosage of crude rare earth chloride increased. Whereas, the turbidity of treated wastewater and the amount of sludge generated were shown to increase as more crude rare earth chloride was added. The remaining fluorine content and the turbidity of treated wastewater were decreased and the amount of sludge generated was observed to increase according the increase of coagulant dosage under the condition of constant input of crude rare earth chloride.

• Journal of Biosystems Engineering
• /
• v.9 no.2
• /
• pp.74-80
• /
• 1984

Storage materials for a minimized storage system should be able to store much energy in small quantities, and to solve such a problem, salt hydrates such as CALCIUM CHLORIDE, SODIUM SULFATE, SODIUM PHOSPHATE etc. were considered as most suitable storage media in which phase change phenomena take place at low temperature. Therefore those salt hydrates were used as storage media in this study, and piped-storage tanks were manufactured vertically for the experiment. The characteristics of thermal storage media were investigated and the results are summarized as follows: 1. From the experiment of radial temperature distribution of vertical piped-storage system, the latent heat phenomenon did not occur in all storage media during heating process because of generations of heat due to the reduction in the number of water molecules. However, among those storage media CALCIUM CHLORIDE had most remarkable latent heat phenomenon during cooling process. Therefore CALCIUM CHLORIDE was considered as most suitable storage media. 2. Heat quantity transferred to the storage media was the largest in case of CALCIUM CHOLORIDE under the same conditions during heating and cooling process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.72-72
• /
• 2000

ITO(Indium-Tin-Oxide)는 n-type 전도 특성을 갖는 산화물 반도체로서 가시광 영역에서의 높은 광투과율 및 낮은 전기 비저항을 나타내기 때문에 태양전지, 액정디스플레이(liquid crystal display), 터치스크린(touch screen) 등의 투명전극 재료, 전계 발광(electroluminescent) 소자, 표면발열체, 열반사 재료 등 다양한 분야에 응용되고 있다. 본 연구에서는 타겟 제작에 드는 비용을 줄이고, 타겟 이용의 효율성을 높이기 위해 기존의 세라믹 타겟 대신 분말 타겟을 사용하여 유리 기판 상에 ITO 박막을 DC magnetron sputtering법에 의해 제조하고, 열처리 온도 및 열처리 분위기에 따른 ITO 박막의 전기적 광학적 특성을 조사하였다. 열처리 온도가 10$0^{\circ}C$이하인 경우 열처리하지 않은 시편과 동일하게 In2O3의 (411)면에 해당하는 peak가 관찰되었다. 그러나 20$0^{\circ}C$의 온도로 열처리 할 경우 (411)면 peak의 세기는 상대적으로 감소하고 대신 이전에 나타나지 않았던 (222)면에 대응하는 peak 세기가 현저하게 증가함을 알 수 잇다. 이것은 ITO 박막의 경정성장이 열처리 전 (411)면 방향으로 이루어지나 20$0^{\circ}C$의 온도로 열처리 후 재결정화에 의해 (222)면 방향으로의 우선방위를 갖고 성장함을 의미한다. 또한 주로 높은 기판온도에서 관찰되었던 (211), (400), (411), (440), (622)면 등에 해당하는 peak가 나타남을 볼 수 있었다. 열처리 온도를 더욱 증가시킴에 따라 결정구조에는 큰 변화 없이 (222)면 peak 세기가 증가하였다. 한편 열처리 온도를 더욱 증가시킴에 따라 (222)면 peak 세기가 상대적으로 조금 감소할뿐 XRD회절 결과에는 큰 변화를 관찰할 수 없었다. 이러한 결과로부터 기판을 가열하지 않고 증착한 ITO 박막의 재결정화에 필요한 최소의 열처리 온도는 20$0^{\circ}C$이며, 그 이상의 열처리 온도는 ITO박막의 결정구조에 큰 영향을 미치지 않음을 알 수 있었다. 열처리 전 비저항은 1.1$\times$10-1 $\Omega$-cm 의 값을 가지거나 10$0^{\circ}C$의 온도로 열처리함에 따라 9.8$\times$102$\Omega$-cm 로 약간 감소하였다. 열처리 온도를 20$0^{\circ}C$로 높임에 따라 비저항은 급격히 감소하여 1.7$\times$10-3$\Omega$-cm의 최소값을 나타내었다. 열처리 온도가 10$0^{\circ}C$인 경우 가시광 영역에서의 광투과율은 열처리하지 않은 시편과 비교해 볼 때 약간 증가하였다. 열처리 온도는 20$0^{\circ}C$로 증가시킴에 따라 투과율은 크게 향상되어 흡수단 이상의 파장영역에서 90% 이상의 투과율을 나타내었다. 이러한 광투과율의 향상은 앞서 증착된 ITO 박막이 열처리 중 재결합에 의해 우선 성장 방위가 (411)면 방향에서 (222)면 방향으로 변화되었기 때문으로 생각된다. 그러나 열처리 온도를 20$0^{\circ}C$이상으로 증가시켜도 광투과율은 큰 변화를 나타내지 않았다.

• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.21-29
• /
• 1989

A clinical study was made on 71cases of Mycoplasma pneumoniae pneumonia from March, 86 to February, 89. The results were as follows; 1. Among the 315 cases of pneumonia, the incidence of mycoplasmal infection was 22.5%. 2. The peak incidence of age was between 5 to 9years of age(53.5%). 3. The sex ratio of male to female was 1.3:1. 4. Monthly distribution showed relatively high frequency from October to January(59.2%). 5. Most common clinical symptoms were cough(98.6%)and then followed by fever(49.3%), coryza(19.7%). Rales were the most common finding(95.7%) and followed by pharyngeal injection (49.3%) and wheezing(18.3 %). 6. The leukocyte counts in peripheral blood were most common in the range of 5000-10000/$mm^3$(47.9%) and the ESR was increased in 57.7%, and positive CRP cases were 87.3%. 7. The most common radiologic finding of pulmonary infiltration was interstitial infiltration(45.1) and then followed by disseminated lobular(39.4%) and lobar pneumonia(15.5%). 8. There are a few cases associated disease or complication: otitis media (5.6%), hepatitis(4.2%) acute glomerulonephritis. bronchial asthma and sinusitis(2.8%), thrombocytopenia(1.4%).

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.67-67
• /
• 2009

알루미늄 합금 재질은 무게의 경량화와 기계적강도가 우수하며 다른 비철금속에 비하여 값이 저렴한 장점이 있다. 현재 산업현장에서 활용하는 가장 흔한 접합법으로 TIG, RSW 등과 같은 용융 용접법을 현재는 많이 사용 하고 있지만 열전도도가 높아 열 확산이 빠르고, 이에 따라 모재의 팽창이 일어나 열변형을 유발하며, 산화피막은 그 내부에 함유된 결정수가 아크용접 중 분해되어 수소를 방출함으로 기공이 발생하여 부도체로 저항용접시 전도성을 방해하는 등의 문제를 발생시킨다. 또한 철에 비해 4배정도 큰 전기전도율에 따라 저항용접시 대전류를 사용해야 하는 등의 문제점이 발생하고 있다. 이와 같은 알루미늄 합금의 용융용접 과정에서 발생하는 단점을 극복하는 기술로 고상접합 방법인 마찰교반용접법(Friction Stir Welding)이 활용되고 있다. FSW는 1991년 영국의 TWI에서 개발된 최신 용접법으로 모재를 용융점 아래에서 고상용접시키는 방법으로 용융에 따른 열변형과 흄가스(hume gas)와 스패터(spatter)를 억제시켜 주는 친환경적인 용접법이다. 이러한 마찰교반용접의 기술은 그동안 특허에 따른 로열티가 산업현장에서 사용하는데 문제가 되었으나 특허보호 기간인 20년이 1년정도의 기간밖에 남지 않은 상황에서 그 사용은 날로 증가하리라 본다. 이러한 마찰교반용접부의 결함을 평가하는 방법에는 UT, RT 등이 활용되고 있으나 얇은 박판에서의 결함검출은 용이하지 않다. 이리한 문제점을 해결하기위하여 초음파 가진을 이용한 적외선 열화상 검출 기법을 이용하여 마찰교반용접부의 결함 검출 가능성을 연구하였다. 20kHz의 주파수를 400Watt로 가진시켜 겹치기(lap joint) 마찰교반용접이된 A6061-T6의 용접부에 초음파를 입사하였을 때 발생하는 열을 적외선 열화상 카메라를 이용하여 측정함으로써 마찰교반겹치기 용접부의 결함 검출에 활용하였다. 용접부에 초음파를 입사하였을 때 부분적으로 온도차이가 발생하였고, 그에 따른 열화상을 검출 할 수 있었다. 이러한 열화상과 실제 시험편의 용접부의 강도를 평가하기 위하여 인장시험을 하였다. 그 결과 초음파 적외선 열화상 검출에서 발열부위가 나타난 부분이 인장시험에서 낮은 인장강도를 보였다.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.206-219
• /
• 2013

This study aims to estimate firing temperature and physicochemical properties of the four clay bricks excavated from the Maritime Province of Siberia. Analysis result shows that the specimens are composed of clay, quartz and feldspar, and some specimens include carbonized organic materials which were probably added in order to enhance its physical strength in bricks. Major mineral components of the bricks are quartz, illite and clay minerals. The result identifying the existence of silimanite by XRD suggests that white material of the Koc 1 was painted for a certain purpose. Unlike most specimens which contained hematite, several samples contain Mullite. Such result suggests that some bricks were fired at high temperature. Furthermore, the results from TG analysis which does not display exothermic peak which appears at between $800^{\circ}C$ to $1,000^{\circ}C$ but display endothermic peak at $900^{\circ}C$ and it also confirms that they were exposed at $900^{\circ}C$ or higher.

• Research in Plant Disease
• /
• v.26 no.4
• /
• pp.195-201
• /
• 2020

Rice bacterial leaf blight (BLB) by Xanthomonas oryzae pv. oryzae (Xoo) is considered to be one of the major rice diseases steadily occurring around the rice-producing countries. In this study, we developed a recombinase polymerase amplification (RPA) assay for the rapid, convenient and specific diagnosis of Xoo by targeting Xoo-specific transposase A gene. As the target gene can be amplified in 10 min without DNA extraction process and special equipment for temperature control, RPA for BLB can be useful and practical component for on-site diagnosis.

• Clean Technology
• /
• v.29 no.3
• /
• pp.200-216
• /
• 2023

Ginkgo leaves are considered waste biomass and can cause problems due to the strong insecticidal actions of ginkgolide A, B, C, and J and bilobalide. However, Ginkgo leaf biomass has high organic matter content that can be converted into fuels and chemicals if suitable technologies can be developed. In this study, the effect of pyrolysis temperature, minimum fluidized velocity, and Ginkgo leaf size on product yields and product properties were systematically analyzed. Fast pyrolysis was conducted in a bubbling fluidized bed reactor at 400 to 550℃ using silica sand as a bed material. The yield of pyrolysis liquids ranged from 33.66 to 40.01 wt%. The CO₂ and CO contents were relatively high compared to light hydrocarbon gases because of decarboxylation and decarbonylation during pyrolysis. The CO content increased with the pyrolysis temperature while the CO₂ content decreased. When the experiment was conducted at 450℃ with a 3.0×U_mf fluidized velocity and a 0.43 to 0.71 mm particle size, the yield was 40.01 wt% and there was a heating value of 30.17 MJ/kg, respectively. The production of various phenol compounds and benzene derivatives in the bio-oil, which contains the high value products, was identified using GC-MS. This study demonstrated that fast pyrolysis is very robust and can be used for converting Ginkgo leaves into fuels and thus has the potential of becoming a method for waste recycling.

• Childhood Kidney Diseases
• /
• v.18 no.1
• /
• pp.36-41
• /
• 2014

Purpose: Urinary tract infections (UTIs) are the most common source of bacterial infections in infants and young children. Accurate diagnosis and treatment is important because of their association with renal scarring, which can lead to complications. Urine endothelin-1 (ET-1) is the major renal isoform produced and released by renal mesangial cells in response to glomerular injury. This study aimed to investigate whether urinary levels of ET-1 can be used as a biomarker for UTI diagnosis. Method: We conducted a prospective study using medical records of 70 patients below the age of 18 years, who visited Chung-Ang University Hospital from July 2012 to July 2013. We classified the patients into the UTI and control groups based on urine culture studies. The UTI group was further divided into upper and lower UTI groups using 99m-Technetium dimercaptosuccinic acid scintigraphy. Urine ET-1 was measured using enzyme linked immunosorbent assay with 0.3 mL urine. Results: The UTI and control groups were comprised of 45 and 25 patients, respectively. Mean urine ET-1 levels were significantly higher in the UTI group than in the control group ($1.41{\pm}0.35$ pg/mL vs. $0.33{\pm}0.07$ pg/mL, P =0.04). There was no significance difference in the quantitative value between the upper and lower UTI groups (P =0.552). There was no correlation between urine ET-1 and serum C-reactive protein (Pearson correlation [R]=0.24), urine ET-1 and serum white blood cell count (R=0.19). Conclusion: Our study suggests that urine ET-1 can be used for early diagnosis of UTI in children.

• Pediatric Infection and Vaccine
• /
• v.25 no.2
• /
• pp.61-71
• /
• 2018

Purpose: Research on the clinical role of Staphylococcus aureus as a pathogen in acute gastroenteritis (AGE) in children has been scarce. This study aimed to clarify the prevalence and clinical correlation of S. aureus detection in children with AGE. Methods: Fecal samples were collected from children with symptoms of AGE who visited a secondary hospital between January 2012 and December 2015. The samples were sent to the Seoul Metropolitan Government Research Institute of Public Health and Environment to test for pathogenic organisms. Clinical patterns were analyzed through medical record review. Results: Among the 663 participants, the bacteria detection rate was 26.2% (n=174), the virus detection rate was 29.7% (n=197), and the non-detection rate was 43.1% (n=286). S. aureus was tested positive from 102 cases and was confirmed as a single pathogen in 53 cases. It was the third most common pathogen. The prevalence by age was highest (45.3%) in 0-2 year-olds. Most cases occurred in summer. Symptoms included diarrhea (71.7%), vomiting (67.9%), fever (49.1%), and abdominal pain (37.7%). Only vomiting showed a significant difference between the S. aureus group and the non-detection group (67.9% vs. 43.0%; P=0.001). Among enterotoxins, the higher incidence of vomiting was associated with classical staphylococcal enterotoxins (SEA, SEB, SEC, SED, and SEE) and SEH (P=0.027). Conclusions: S. aureus was the bacteria commonly isolated from children with AGE. Our study identified cases of staphylococcal AGE in children based on fecal samples and confirmed the characteristic symptoms, affected age groups, seasonal distribution, and correlation with enterotoxins.