Purpose: To observe changes of coatings and lens materials with varying temperature to understand effect of temperature on plastic lens. Methods: In this study, three lenses of different refractive indices (2 of thiourethane oriented lenses, an allyl diglycol carbonate oriented lens) were exposed to high temperature (50, 80, and 100 degree) for 5 hours and changes of individual coating (anti-refractive coating, hard coating, and water repellent coating) were measured. Results: As a result, high-refractive index lenses did not exhibit significant variation of hardness. However, hardness of mid-refractive index lens were decreased when exposed to high temperature and destructions of hard coating layer was inferred. Surface contact angles of lens were decreased with increasing temperature and water repellent coating layer were damaged at higher than 80 degree. Conclusions: Multi including water repellent coatings on all three lenses with different refractive indices were damaged when exposed to at or higher than 80 degree. The degree of changes in mechanical and physical properties were depended on polymer material type.
Water-repellent coating solutions were prepared by sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and thermally cured to prepare a non-fluorine water-repellent coating films. The effects of molar ratios of MTMS/TEOS, water concentration and ammonia concentration on the hydrophobic properties of the coating films were studied. The contact angle of water on coating films prepared by varying the molar ratio of MTMS/TEOS to 1~20 showed a maximum value of $108^{\circ}$ when the MTMS/TEOS molar ratio was 10. With increasing water content, the coating films showed the larger contact angles and the better the water repellency. As the amount of ammonia added was increased, the contact angles of coating films were increased, showing the better the water repellency. It is considered that the larger the amount of ammonia added, the larger the size of the silica particles generated, which increases the surface roughness of the silica particles, thereby increasing the water repellency.
Optimization study was carried out to improve the durability of the gas diffusion layer (GDL) in alkaline fuel cell cathode by the use of highly stable PDMS superhydrophobic coating. Two different commercial GDLs were selected as substrates. Coating temperature and viscosity of PDMS were controlled for the stability of structure in microporous layer of GDL as well as uniform coating according to thermal characteristics of GDL. Regardless of PDMS viscosity, highly stable superhydrophobicities were obtained with both GDLs at $200^{\circ}C$. After the accelerated test, however, 28BC GDL coated with 1000 CS PDMS showed the best durability with the lowest loss of superhydrophobicity.
This paper describes a simple approach for preparing a superhydrophobic and superoleophobic coating via spraying the mixture of UV-curable polyurethane acrylate and silica nanoparticles dispersed in a solvent. The prepared surface structures can be controlled by changing the types of solvents, the concentration of the polymer, and the amount of spraying. Superhydrophobicity and superoleophobicity are quantified by measuring the contact angle of water and oil, respectively. We also demonstrate the mechanism of spray coating with maximized superhydrophobicity and superoleophobicity through the analysis of re-entrant surface structures. At the appropriate amount and the composition of mixed solutions, the contact angle hysteresis of water and oil on the prepared surface is less than 2° and 30°, respectively. In addition, it shows excellent water-repellent and oil-repellent properties such that the oil droplet bounces off the surface.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2013.05a
/
pp.187-187
/
2013
알루미늄 표면에 산/알칼리 에칭법을 이용하여 복합구조를 형성시키고 소수성 물질을 코팅한 후 접촉각과 구름각을 측정하여 초발수 특성을 확인하였다. 표면의 복합구조는 전자현미경을 이용하여 정밀하게 관찰되었고 표면의 구조 및 잔류물에 따른 초발수 특성의 변화를 관찰하였다. 이는 향후 다양한 기능성 코팅 소재 분야에 유용하게 적용될 수 있을 것으로 기대된다.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.308-308
/
2011
최근 초발수성 표면은 자동차 표면을 비롯해 안경 렌즈 등 여러 분야에서 사용되고 점차 그 필요성이 대두되고 있다. 이러한 초발수성 표면 제작은 주로 자연 상태에서 초발수 특성을 보이는 연 잎을 모방하는 방법으로 이루어지고 있다. 연 잎의 표면을 살펴보면 표면에 마이크로-나노 구조의 돌기가 존재하고 그 위에 표면에너지가 낮은 물질이 코팅되어 있는 구조이다. 본 연구에서는 이를 응용하여 금속 표면에 마이크로-나노 구조물을 형성하고 그 위에 발수 특성을 지닌 물질을 코팅하는 방법을 이용하여 초발수성 금속 표면을 개발하였다. 이는 건축 외장재, 자동차 및 내연 기관 부품, 모바일 기기 등의 가전제품 외장재 등 발수 특성을 필요로 하는 분야에 적용 가능하고, 이에 대한 수요가 급증하고 있다. 마이크로-나노 구조 형성은 기계적 가공 및 이온 빔 식각 방법을 이용하였다. 그리고 그 위에 plasma enhanced chemical vapor deposition (PECVD) 방법을 이용하여 표면에너지가 낮은 fluorinated carbon 혹은 diamond-like-carbon (DLC)를 코팅하였다. 본 연구의 결과, 표면 처리 이전 물과의 접촉각이 $60^{\circ}$ 정도를 보이는 steel 기판이 표면 처리 이후에는 $140^{\circ}$ 이상의 접촉각을 보임으로써 초발수 특성의 표면이 형성되었음을 확인할 수 있었다.
Proceedings of the Korean Society for Emotion and Sensibility Conference
/
2009.05a
/
pp.131-134
/
2009
본 연구는 가공방법이 다른 투습발수직물의 마찰 속도별 직물마찰음의 소리특성과 주관적 평가간의 관계를 분석하는 것을 목적으로 한다. 스포츠웨어용 투습발수직물 중 가공방법이 다른 4 종(PU 건식코팅, PU습식코팅, 시레가공, 라미네이팅)의 나일론 100% 시료를 대상으로 실험하였다. 마찰속도의 상세 설정이 가능한 직물소리 시뮬레이터 v. 4.0으로 제어가 되는 직물마찰음 발생장치를 사용하여 직물마찰음을 발생시켜 녹음하였다. 직물의 마찰 속도는 동작(walking, jogging, running)시 팔과 몸통 사이의 마찰속도를 분석하여 이 속도에 따라 직물마찰음을 발생시켰고, Sound quality system으로 7 가지(SPL, ${\triangle}L$, ${\triangle}f$, Loudness(Z), Sharpness(Z), Roughness(Z). Fluctuation Strength(Z)) 소리특성을 분석하였다. 주관적 평가는 9 개의 형용사 쌍에 대해 의미미분척도로 평가되었다. 소리특성 분석 결과, 속도별 소리특성은 가공방법에 따른 차이 없이 walking 시가 가장 덜 시끄러운 소리가 발생하였고, 가공방법에 따라서는 마찰속도에 따라 약간 차이가 있지만 라미네이팅가공을 한 시료가 가장 날카로운 소리를 발생시켰다. 주관적 평가 결과, '거슬리는'과 '불쾌한'의 감성에 대해서는 walking, jogging, running의 순서로, 시레가공, 라미네이팅, PU건식코팅, PU 습식코팅의 순서로 증가하였다.
Non-fluorinated water repellent coating solutions were obtained using methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and cured thermally to prepare water repellent coating films. During this process, the effect of molar ratio of TMES/MTMS was studied for the hydrophobic properties of the coating films. Hydrophobic properties of coating films were characterized using contact angle measurement, surface morphology analysis and infrared spectroscopy. When the molar ratio of TMES/MTMS was varied from 0 to 30, the contact angle of the un-coated cold-rolled steel sheet was $30^{\circ}$, whereas when the molar ratio of TMES/MTMS was 1, the contact angle increased to $104^{\circ}$ and water repellency was significantly improved. In the case of TMES/MTMS molar ratios of 10, 15, 25 and 30, the contact angles of coating films showed $109^{\circ}$, $114^{\circ}$, $117^{\circ}$ and $144^{\circ}$, respectively. At this time, the hydrophobicity of the coating films was improved by the increase of the surface roughness and the content of the methyl component at the coating surface. In particular, when the molar ratio of TMES/MTMS was 30, the overall surface roughness was greatly increased due to the presence of surface particles as well as the water repellency due to methyl groups of TMES, resulting in super hydrophobicity of $144^{\circ}$.
Methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as starting materials were dissolved in various types of solvents, and hydrolysis with water and polycondensation reaction were carried out using various types of catalysts to prepare non-fluorinated water-repellent coating solutions. The coating solutions were spin-coated on cold-rolled steel sheets, and thermally cured to prepare water-repellent coating films. The effect of types of catalysts and solvents on the water repellency of the resulting coating films was investigated during this process. When hydrochloric acid and nitric acid, which are strong acids, were used as catalysts, the solutions showed a white opaque state due to the aggregation of siloxane polymers. On the other hand, when acetic acid, phosphoric acid, and oxalic acid, which are weak acids, were used, they were in a stable and transparent state without precipitation. As a result, the contact angles of the coated films, prepared from hydrochloric acid and nitric acid, were $58^{\circ}$ and $92^{\circ}$, respectively, showing low water repellency. On the other hand, when acetic acid, phosphoric acid, and oxalic acid were used, the contact angles of the coated films were $101^{\circ}$, $103^{\circ}$ and $116^{\circ}$, respectively, showing high water repellency. In addition, when isopropanol and ethanol were used as solvents, phase separation occurred in the solutions due to the aggregation of siloxane polymers. On the other hand, when methanol, ethyl acetate, and methyl ethyl ketone were used as solvents, the solutions were transparent and showed a stable state without sedimentation.
Baek, Cheol-Heum;Jang, Ji-Won;Bang, Seung-Gyu;Seo, Seong-Bo;Kim, Hwa-Min;Bae, Gang
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.273-273
/
2012
최근 스마트 윈도우, 자가세정(Self-Cleaning), 김서림방지(Anti-Fogging), 디스플레이 표시장치, 대전방지 코팅 등 다각적으로 활용이 가능한 PTFE (Ploytetrafluoroethylene)를 Sol-gel, Sputtering, Spin-Coating, CVD (Chemical vapor deposition)방법을 이용하여 낮은 표면에너지와 나노사이즈의 표면 거칠기를 가지는 $150^{\circ}$ 이상의 초-발수성 표면에 대한 많은 연구가 진행되고 있다. 본 실험에서는 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과, 균일한 박막 및 대 면적 공정이 가능한 RF-magnetron sputtering방법을 이용하여 Plasma etching으로 표면적의 거칠기와 낮은 표면에너지를 만든 뒤, 발수특성을 가진 PTFE를 증착하여 접촉각 변화와 구조적 및 광학적 특성을 측정하였다. AFM (Atomic Force Microscope)측정결과 100 w에서 가장 높은 1.7 nm의 RMS(Root mean square)값이 측정되었고, 접촉각 측정결과 Plasma etched glass는 25 w에서 125 w로 증가함에 따라 친수성을 나타내었으며, 100 w에서 가장 낮은 $15^{\circ}$의 접촉각을 나타내었다. PTFE박막을 증착하였을 때는 100 w에서 $150^{\circ}$의 초발수 특성을 나타내었고, 투과율 측정 결과 85%이상의 높은 투과율을 나타내었다. Plasma etching을 이용한 PTFE 발수 특성은 비가 오면 자동으로 이물질이 씻겨 내리는 자동차 유리등의 개발이 가능하고, 높은 투과율이 요구되는 액정표시장치(LCD)같은 차세대 대형 디스플레이의 표면 코팅에 사용이 가능 할 것이라 사료된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.