• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.46-46
• /
• 2004

한국항공우주산업(주) 우주개발연구센타에서는 고흥의 외나로도 우주센터에서 국내 최초로 발사되는 소형위성 발사체인 KSLV-1(Korea Space Launch Vehicle-1)의 성능검증을 위해 탑재되는 발사체 성능 검증위성(Korea Demonstration Satellite)을 개발하고 있다. 탑재소프트웨어는 검증위성의 임무를 수행하기 위하여 요구되는 데이터를 처리하고, 위성을 제어하는 역할을 수행한다. 이에 따라 검증위성의 탑재소프트웨어의 주요 기능은 발사체 환경 측정 및 비디오 영상 자료의 획득, GPS로부터 위성체 궤도자료의 저장, 밧데리 충방전 제어, 태양 지향 및 지상과의 통신 등을 고려한 자세제어이다. (중략)

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.168.2-168.2
• /
• 2012

위성체가 발사체에 실려 발사될 때에 매우 높은 가속도에 의한 정적, 동적 하중 및 공기의 저항에 의한 하중, 연소 가스 분출시 발생하는 음향에 의한 하중, 발사체로부터 분리될 때 발생하는 충격 하중 등 여러 가지의 극심한 하중을 겪게 된다. 이러한 발사 환경에 대한 안정성을 검토하기 위해 발사체 업체에서 제공하는 매뉴얼 상의 설계 조건을 이용하여 설계하고 해석하여 검증한다. 천리안 위성의 후속 위성으로, 해상도 및 채널 성능 향상된 차세대 기상탑재체를 탑재하고 현재 개발 중인 정지궤도 복합위성에 대해 발사환경을 고려한 개념 설계 및 초기 해석을 수행하였고, 개발 가능성 분석을 그 목적으로 한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.173.2-173.2
• /
• 2012

위성체가 발사체에 실려 발사될 때에 매우 높은 가속도에 의한 정적, 동적 하중 및 공기의 저항에 의한 하중, 연소 가스 분출시 발생하는 음향에 의한 하중, 발사체로부터 분리될 때 발생하는 충격 하중 등 여러 가지의 극심한 하중을 겪게 된다. 이러한 발사 환경에 대한 안정성을 검토하기 위해 발사체 업체에서 제공하는 매뉴얼 상의 설계 조건을 이용하여 설계하고 해석하여 검증한다. 천리안 위성의 후속 위성으로 해상도 및 채널 성능 향상된 차세대 기상탑재체를 탑재하는 정지궤도 복합위성을 개발 중이다. 임무 수명 기간을 연장할 수 있는 3.5톤급 혹은 그 이상의 플랫폼에 대한 형상 설계를 수행하였고 그 내용을 목적으로 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1207-1215
• /
• 2008

Satellite generates a complex electromagnetic noise by conducted and radiated coupling effect of the various electrical instruments. This noise may cause serious problems on the satellite system. To minimize the electromagnetic coupling effects and maintain the system safety margin, system noise reduction technique should be applied from the beginning of the system design. The COMS system is evaluated by measuring the conducted noise on system electrical power leads at PSR(Power Supply Regulator) and verifying a 6 dB system safety margin under the complex noise environment with current injection. The radiated noise due to the complex transmit antenna configuration is evaluated by integrating all unit-level RE measurement results, and the RF compatibility between spacecraft and launch vehicle is analyzed with the above estimations. This paper describes the COMS EMC compatibility analysis with respect to each unit level EMC test results, and RF compatibility analysis between spacecraft and launch vehicle. The analyzed results will be reflected on FM(Flight Model) EMC test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.966-970
• /
• 2005

On the basis of the development of KSLV-1, KoDSat was designed and manufactured to demonstrate the performance of KSLV-1. KoDSat is exposed to a severe vibrational environment at launch. The structural reliability of KoDSat has to be verified using vibrational test. The structural compatibility and verification of components between analysis and test can be proved using environmental vibration test. In this paper, we review the structural characteristic of thruster control unit for a space launch vehicle and design TCU housing using mathematical model. In order to verify the structural compatibility and reliability, half-sine shock, random and sing sweep vibration test was performed. Especially, sing sweep vibration test result is compared with analysis result and mathematical model is verified.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.86-91
• /
• 2012

This paper described validation results of COMS Ka band antennas beam coverages which were developed by ETRI. After satellite launch, In Orbit Test(IOT) activities are stat to check spacecraft and payloads are still in healthy condition after launch. During IOT phase, ETRI measured radiation patterns of COMS Ka band antennas and compare with ground test(CATR) results. The antenna patterns similarity between IOT results and CATR results show that COMS Ka band antenna withstand launch vibration and in the good healthy condition. After IOT, ETRI performed field test for beam coverage measurements with vehicle to check if Ka band beam coverage are formed well as designed. For the beam coverage measurement, 17 points were selected over the Korean peninsula. The field measurement data were very similar with CATR data and this confirms that beam coverage are formed well over the Korean peninsula as expected.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.106-113
• /
• 2002

In spacecraft system, structure subsystem has the mission of supporting all the components safely under various space environmental conditions. The safety of spacecraft structure is finally verified from the coupled load analysis, which is a branch of load analysis which combines the launch vehicle and satellite. This study introduces the optimization algorithm to reduce the weight of spacecraft structure under launch environmental conditions directly. The acceleration responses are obtained by the introduction of coupled load analysis, which lead to check the failure of spacecraft structural members. The results show a 12% saving of structural weight and this saving is mainly driven by the thickness of honeycomb core, which strongly affects the natural frequencies of platforms and panels.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.8-13
• /
• 2010

Satellite structure should be designed to accommodate and support safely the payload and equipments necessary for its own missions and to secure satellite and payloads from severe launch environments. The launch environments imposed on satellites are quasi-static accelerations, aerodynamic loads, acoustic loads and shock loads. Especially when optical payload is accommodated, satellite structure usually adopts the optical bench consisting of composite material not only to support and secure but also to guarantee good pointing stability against extreme thermal environments. This paper deals with optical bench and support structure which shall be designed to minimize the loads transferred to optical payloads from satellite.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.419-422
• /
• 2006

위성발사체와 같이 극환 환경에서 사용되는 전자 탑재물들은 진동이나 충격이 가해질 때 정상적으로 동작하지 못하는 경우가 많다. 그러므로 위성발사체에 탑재되는 모든 탑재물들은 발사전에 지상에서 다양한 환경시험을 통하여 그 성능을 검증해야 한다. 기준 클럭을 사용하여 항법해를 계산해야 하는 GPS 수신기는 특히 다른 전자 탑재물 보다 클럭의 안정도에 더 많은 영향을 받으므로 극한 진동 및 충격 환경에서 다양한 문제들이 나타난다. 본 논문에서는 위성발사체의 비행안전용으로 개발된 GPS 수신기의 진동 및 충격 환경시험 결과를 바탕으로 그러한 환경에서 기준 클럭이 영향을 받아 나타나는 다양한 동작특성을 설명하고, 기준 클럭의 중요성과 진동 및 충격 환경시험에서의 유의사항 및 문제 해결 방법에 대하여 설명한다.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.60-65
• /
• 2007

Acoustic chamber was developed for verifying the performance of a satellite under the launch condition on the Space environment test department. As the size of a satellite is increased the extension of existing facility is required. This paper encompasses the following items; redesign of components in acoustic chamber, product procedures of them and review of the test for the components of satellite in the upgraded acoustic chamber.