• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.233-236
• /
• 2003

수소 가스발생을 위한 마이크로 수소 발생기 개발에서 MEMS 공정을 이용하여 기판에 반응 유로를 위해 HAR(High Aspect Ratio) 구조물을 형성하고 Ru(ruthenium) 박막을 증착하여 수소 발생량을 측정하였다. Pyrex glass 기판상에 sand blast 방법으로 반응 구조물을 만들었으며, 그 위에 sputter system을 이용하여 Ru 박막을 $5500{\AA}$었다. 수소 발생량은 촉매 박막이 증착된 기판 재질과 기판의 표면 상태 그리고 마이크로 수소 발생기에 두께로 증착하였다. 반응 구조물의 전체 크기가 가로 2.0 cm, 세로 2.0cm의 면적에서 약 12.3 ml/min의 수소가 측정되 형성한 구조물의 형상에 의존하였다. Pyrex glass 기판을 사용하여 HAR로 반응 구조물을 형성한 경우에 단위 면적당 Ru 박반응 막의 반응 표면적이 증가되어 기존에 구조물을 형성하지 않은 평면 기판에 비교하여 약 5.5배 이상의 수소 발생이 증가하였다.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.379-387
• /
• 1996

본 연구에서는 GaAs 소자제작 및 epi-layer 성장 공정에 있어 이용되어지는 HCI, H3PO4, 탈이온수(de-ionized water:DIW)를 통한 습식제정후 공기중 노출에 따른 오염을 최소화하여 표면상태 변화를 진성적(intrinsic)으로 관찰하고자 모든 세정처리를 아르곤 가스(argon gas)로 분위기가 유지되는 glove box에서 수행하였으며, 표면조성 및 결합상태 변화에 대한 관찰은 X-선 광전자 분광기(X-ray photoelectron spectroscopy)를 통해 이루어졌다. 고진공하에서 GaAs를 벽개하여 관찰함으로써 Ga이 대기중 산소이온과 우선적으로 결합함을 알 수 있었고, 이런 GaAs 표면의 반응성에 대한 고찰을 바탕으로 습식세정에 따른 화학반응 기구가 제시 되어졌다. HCI 및 H3PO4/DIW/HCI처리후 CI-이온의 Ga 이온과의 반응에 의한 Ga-CI결합의 형성과 As 산화물의 높은 용해도에 따른 As 산화물의 완전한 제거 및 식각전 초기(bare)GaAsvyaus에 존재하는 원소(elemental)As 상태의 식각후 잔류가 관찰되어졌다. 또 HCI, H3PO4/DIW/HCI 처리하고 DIW로 세척후 표면상태 변화를 관찰한 결과, DIW처리에 의해 elemental As 상태가 증가함을 알 수 있었다.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.303-307
• /
• 2001

Operation conditions to maximize the hydrolysis of beef tallow was investigated by using the response surface method. In the response surface analysis, reaction temperature, pressure, and ratio of fat to water was considered as independent variables. The concentrations of triglycerides. diglycerides, monoglycerides and free fatty acids were considered as dependent. variables. The optimum conditions for the hydrolysis was as follows' the reaction temperature was $271^{\circ}C$, pressure 86 bar and ratio of fat to water was 106.08g / 133.93 g. The maximum concentration of free fatty acids was 96.49 % at these optimum conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.401-407
• /
• 2011

The conventional method of magnetic abrasive polishing is not suitable for non-magnetic materials because such polishing is basically possible when magnetic force exists and the magnetic force in non-magnetic materials is very low. The installation of an electromagnet under the working area of a non-magnetic material, which is called second-generation magnetic abrasive polishing in this study, can enhance the magnetic force. Experimental evaluation and optimization of process parameters for polishing magnesium alloy steel was performed by adopting the design of experiments and the response surface method. The results indicated that the intensity of the magnetic force and spindle speed are significant parameters that affect the improvement of surface roughness. A prediction model for the surface roughness of the magnesium alloy steel is developed using the second-order response surface method.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.235-240
• /
• 2002

The surface of polypropylene was modified by 1 keV $Ar^+$ ion beam in an $O_2$ environment in order to enhance wettability. Contact angle of deionized water on modified polypropylene was reduced from $78^{\circ}$to $22^{\circ}$. The enhanced wettability is originated from newly formed functional groups such as ether, carbonyl, and carbonyl groups. During immersion in deionized water, the enhanced wettability has remained nearly same. After washing in water, the hydrophilic functional groups on the polymer surface have been very stable. The modified polypropylene was adopted as bio-film media to remove organics in synthetic wastewater. Microbe adhesion on the polypropylene surface was improved due to the newly formed hydrophilic groups.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.588-593
• /
• 2022

The effects of P₂O₅-doped on the surface of MgO particles on hydrolysis, water repellency, and insulation behavior were investigated. P₂O₅-doped MgO has exhibited a unique electrical property, which is significant insulation behavior due to both the suppression of the hydrolysis reaction by P₂O₅ and water repellency. Therefore, the insulation behavior was inversely proportional to the hydrophilicity and the Mg(OH)₂ and OH^-charge transfer ratio by the surface hydration reaction of MgO. The insulation of MgO according to aging was strongly influenced by the surface hydration reaction, the band gap of the added dopant species, and the hydrophilicity and hydrophobicity of the dopant. Finally, it was to show electrical insulation by inhibiting the surface hydration reaction of the hydrophilic MgO, which has a great potential for use in heat transfer medium applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.625-633
• /
• 2013

Multiple response surface optimization (MRSO) aims at finding a setting of input variables which simultaneously optimizes multiple responses. The minimization of mean squared error (MSE), which consists of the squared bias and variance terms, is an effective way to consider the location and dispersion effects of the responses in MRSO. This approach basically assumes that both the terms have an equal weight. However, they need to be weighted differently depending on a problem situation, for example, in case that they are not of the same importance. This paper proposes to use the weighted MSE (WMSE) criterion instead of the MSE criterion in MRSO to consider an unequal weight situation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.97-105
• /
• 2015

Multiresponse optimization (MRO) seeks to find the setting of input variables, which optimizes the multiple responses simultaneously. The approach of weighted mean squared error (WMSE) minimization for MRO imposes a different weight on the squared bias and variance, which are the two components of the mean squared error (MSE). To date, a weighted sum-based method has been proposed for WMSE minimization. On the other hand, this method has a limitation in that it cannot find the most preferred solution located in a nonconvex region in objective function space. This paper proposes a Tchebycheff metric-based method to overcome the limitations of the weighted sum-based method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.358-369
• /
• 1995

Surface structure and adhesion by the reaction between thin metal films and SiC were studied at temperatures between 550 and $1450^{\circ}C$ for various times. The reaction with the formation of various silicides was initially observed above $850^{\circ}C$ for SiC/Co system and $650^{\circ}C$ for SiC/Ni system. The cobalt reacted with SiC and consumed completely at $1050^{\circ}C$ for 0.5 h and the nickel at $950^{\circ}C$ for 2 h. The observed CoSi phase in SiC/Co and Ni$_2$Si phase in SiC/Ni are thermodynamically stable in the reaction zone up to 125$0^{\circ}C$ and $1050^{\circ}C$ respectively. Carbon was crystallized as graphite above $1450^{\circ}C$ for SiC/Co reaction surface and $1250^{\circ}C$ for SiC/Ni. The critical loads of the thin metal films on SiC substrate were qualitatively compared in terms of the scratch test method. At temperatures between 850 and $1050^{\circ}C$, relatively higher values of 20~33 N were observed for SiC/Ni couples.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.375-380
• /
• 2003

In this study. we have intended to control the properties of surface reaction zone generated between pure titanium and oxide investment moulds. Commercially pure titanium was centrifugally casted and silica$.$alumina based phosphate bonded investment was used as the mould material. The effect of cooling methods after casting on the surface reaction zone and mechanical properties of casts were investigated. The resulting casts showed the multilayered surface reaction zone regardless of cooling method. Especially. water cooling method produced the titanium casts with thinner surface reaction zone. weaker strength. and higher elongation properties compared to air cooling. It can thus be known that the resulting casts had satisfactory mechanical properties as dental materials. From these results, the cooling rate dependence of interfacial and mechanical properties can be attributed to the diffusion of oxygen from casting environment, which control the reaction of titanium and mould.