• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1013-1030
• /
• 2018

Biodiesel is a fuel produced in the form of a fatty acid methyl ester by using raw materials such as animal fat, vegetable oil and its by-products, and is being seen as a biofuel that can replace petroleum energy. However unsaturated fatty acid methyl esters in biodiesel causes to oxidize during storage and distribution, resulting in poor fuel quality and corrosion of vehicle engine components. In this study, the influence of quality and oxidation characteristics of biodiesel on the oxidation stability is investigated and the evaluation method related it is described. We also propose a method to improve the drawback of oxidation stability in biodiesel.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.58-67
• /
• 2013

PBT (polybutylene terephthalate) has excellent mechanical properties such as low absorption, dimensional stability, abrasion resistance. It is used in manufacturing electronic components, the automobile part and the various precise parts. Bis (hydroxybutyl) terephthalate (BHBT) which is a PBT monomer, can be produced by transesterification reaction of DMT (dimethyl terephthalate) with 1,4-butandiol (BD). The kinetics of transesterification reaction of DMT with BD using zinc acetate as a catalyst was studied in a batch reactor. Previous kinetic studies was carried out in a semibatch reactor where generated methanol was removed so that reverse reactions were not considered in the kinetic expressions, resulting in inaccuracy of the kinetic model. Mathematical models of a batch reactor for the transesterification reaction were developed and used to characterize the reaction kinetics and the composition distribution of the reaction products. More accurate models than previous models was obtained and found to have a good agreement between model predictions and experimental data.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.409-414
• /
• 2012

이 논문은 기존의 포트폴리오와 관련된 모형에 경기변동(business cycle)과 관련된 변수들을 포함하였을 경우 경기변동이 개인투자자들의 현금 및 주식보유를 통한 자본이득 극대화와 어떤 관련성이 있는지와 관련된 것이다. 기존 문헌들을 살펴보면, 개인투자자들은 경기호황기에는 모멘텀 투자와 소형주와 성장주 등에 포트폴리오를 분산투자하지만 경기가 침체기(recession)에 들어설 경우 수익률이 급등락 하는 특성을 지니는 소형주(small cap)에 집중적인 투자를 하는 성향을 나타내고 있다. 한편 이 논문의 분석결과에 따르면, 경기안정과 금리안정정책, 물가안정 등은 서로 상충관계(trade-off)에 놓여 있음에도 불구하고 코스피 수익률과 코스닥수익률에 모두 향후 영향을 미칠 것으로 판단된다. 이는 현재까지의 정책조합(policy mix)보다 더 정교하고 타이밍을 잘 포착하지 않으면 정책실패에 따른 경기와 물가불안이 동시에 나타나는 스태그플레이션(stagflation)으로 이어질 수 있음으로 정책집행의 효율성이 어느 때보다도 중요해 질 것으로 보인다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.527-527
• /
• 2009

1세대 바이오디젤인 fatty acid methyl ester(FAME)의 문제점을 극복하기 위하여 많은 연구가 진행 중 이다. 소위 차세대 바이오디젤은 triglyceride의 산소 화합물을 제거하여 정유 공정을 통해 생산된 디젤과 동일한 특성을 지닌 탄화수소로 전환시킨 오일이다. 이를 위하여 수소를 첨가하여 산소를 제거 시키는 Hydrodeoxygenation(HDO) 반응이 필요하다. 고온($300-400^{\circ}C$), 고압(50-100 bar)의 혹독한 조건에서 높은 수율과 안정성을 보이는 촉매 개발이 필요하다. 이를 위하여 반응물중의 산소를 효과적으로 제거하기 위하여 산소 전달능이 뛰어난 $CeO_2$ 담체에 열안정성을 높이는 $ZrO_2$를 조합한 $Ce-ZrO_2$ 담체를 선정하였으며 수소첨가 탈산소 반응에 활성을 나타낼 것으로 예상되는 니켈을 활성성분으로 선정하였다. 본 연구에서는 15%Ni-$Ce_{(1-x)}Zr_{(x)}O_2$ ($0{\leq}x{\leq}1$)촉매를 공침법(co-precipitation)으로 제조하였으며 $500^{\circ}C$에서 소성하였다. 촉매 특성분석은 XRD, BET, H2-TPR을 이용하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.480-492
• /
• 1996

AZO (Aluminum doped Zinc Oxide) transparent conducting thin films were fabricated by reactive DC mangnetron sputtering method using zinc target containing 2 wt% of Al. Transition range with optimum transmittance and conductivity was obtained by contrlling partial pressure of reactive oxygen gas. Sputtering condition for this transition range could be kept stable by regulating the target voltage. According to XRD analysis, there was only one peak for (002) plane in AZO films and the films deposited in transition range.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.7-11
• /
• 2022

In the membrane forming process of a proton exchange membrane fuel cell (PEMFC), drying and annealing heat treatment processes are required for performance and durability. In this study, the optimal annealing temperature for improving the durability of the polymer membrane was studied. It was annealed in the temperature range of 125~175 ℃, and thermal stability and hydrogen permeability were measured as basic data of durability at each annealing temperature. The electrochemical durability was analyzed by Fenton reaction and open circuit voltage (OCV) holding. The annealing temperature of 165 ℃ was the optimal temperature in terms of thermal stability and hydrogen permeability. In the Fenton reaction, the fluorine emission rate of the membrane annealed at 165 ℃ was the lowest, and the lifespan of the membrane annealed at 165 ℃ was the longest in the OCV holding experiment, confirming that 165 ℃ was the optimal temperature for the durability of the polymer membrane.

• The Journal of Engineering Geology
• /
• v.30 no.2
• /
• pp.185-198
• /
• 2020

High-density rapid expansion material is a method that increases the solid volume of injection materials due to hydration and foam reactions at the same time as spraying. It is an effective method for securing ground stability, restoring subsidence, and loading during construction of structures. In this regard, through the mechanical experiments of injection materials, the stability of the foundation ground of the structure and the effect of increasing the endurance using site construction were analyzed. The results of the experiment showed that the unit weight of soil decreased by 10.5% after injection of the filling material, and the allowable support for the structure was deemed safe, and the subsidence by each section after ground improvement was determined to be safe at 2.28, 1.55 and 0.46 cm, respectively, with an acceptable subsidence of less than 5 cm. After the field test, five inclinometers were installed on the top floor of the target building to measure the displacement of the X and Y axes. As a result of the measurement, no displacement related to the phenomenon of inequality or subsidence cracks of the structure was measured for about 16 months (509 days) after construction. This can be judged to be a sufficient increase in the stability of the ground after the injection of rapid expansion.

• Proceedings of the Ginseng society Conference
• /
• 1988.08a
• /
• pp.99-107
• /
• 1988

Samples of red ginseng. which had been manufactured and packaged by the Korea Monopoly Corporation. were stored at ambient temperatures $(12-28^{\circ}C)$ and humidities $(55-68\%)$ for one to nine years to examine their overall quality stability and. in particular. antioxidant activity. The approximate compositions. contents of various solvent extracts. and TLC and HPLC patterns of ginsenosides in the samples which are otherwise susceptible to oxidation. were stable as judged by the changes of the TLC and GLC patterns of the lipids and fatty acids. It was also found that polyunsaturated fatty acids such as linoleic (C18: 2) and linolenic acid (C18: 3) present in the samples had been very stable during the long storage periods. The intensity of the brown color of the red ginseng samples increased significantly with storage time. The pH of the aqueous extracts of the samples also increased slightly during storage. The coloration changes seem to indicate that extensive browning reactions had occurred during storage. The reducing powers of aqueous and ethanol extracts and antioxidant activity of ethyl acetate extracts also increased with storage time. The increase in reducing powers and antioxidant activity appeared to be directly attributable to the increased amounts of non-enzymatic browning reaction products formed progressively during the long storage periods. Therefore. it seems that those antioxidative compounds. which will be progressively formed in red ginseng through non-enzymatic browning reactions during the manufacturing process and long-term storage. will not only contribute to their overall quality stability but also have some significant relationship with their antiaging pharmacological effects.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.316-320
• /
• 2024

To optimize the emulsion stability and antibacterial activity against Escherichia coli (E. coli) of cosmeceuticals using Scutellaria baicalensis extracts and olive wax as natural emulsifiers, we conducted a study. The independent variables were the amounts of Scutellaria baicalensis extracts and olive wax added. The response variables included the emulsion stability index (ESI) of the cosmeceuticals product and the inhibition diameter against E. coli. Through central composite design-response surface methodology (CCD-RSM), we obtained a statistically significant and reliable regression equation within a 95% confidence interval. By optimizing multiple responses, we determined that the optimal emulsification conditions that satisfied both ESI and E. coli inhibition diameter were 3.7 wt% of Scutellaria baicalensis extracts and 2.7 wt% of olive wax. The predicted ESI and E. coli inhibition diameter were 97.9% and 9.7 mm, respectively. When actual experiments were conducted under the optimal conditions, the measured ESI and E. coli inhibition diameter were 95.0% and 9.4 mm, respectively, with an average error rate of 3.2 ± 0.4%.

• Journal of Energy Engineering
• /
• v.13 no.3
• /
• pp.228-233
• /
• 2004

This paper reports production of low-molecular weight carboxylic acids from the hydrothermal treatment of representative organic wastes and compounds with or without oxidant (H$_2$O$_2$). Organic acids such as acetic, formic, succinic and lactic acids were obtained. This result increased to 42mg/g dry waste fish entrails in the presence of H$_2$O$_2$. Experiments on glucose representing cellulosic wastes were also carried out, getting acetic acid of about 29mg/g glucose. Studies on temperature dependance of formation of organic acids showed thermal stability of acetic acid, whereas, formic acid decomposed readily under hydrothermal conditions. In general. results demonstrated that the presence of oxidants favored formation of organic acids with acetic acid being the major product.