• Journal of Food Hygiene and Safety
• /
• v.29 no.3
• /
• pp.165-169
• /
• 2014

Salmonella spp. and Brucella spp. are associated with considerable diseases of both humans and animals. In addition, these microorganisms cause the economic loss in animal farming and food industry. In this study, the disinfection efficacy of a commercial disinfectant, composed to povidone-iodine was evaluated against S. typhimurium and B. ovis. A bactericidal efficacy test by broth dilution method was used to determine the lowest effective dilution of the disinfectant following exposure to test bacteria for 30 min at $4^{\circ}C$. The disinfectant and test bacteria were diluted with hard water (HW) or organic matter suspension (OM) according to treatment condition. On HW condition, the bactericidal activity of the disinfectant against S. typhimurium and B. ovis was 400 and 150 fold dilutions, respectively. On OM condition, the bactericidal activity of the disinfectant was 5 and 20 fold dilutions against S. typhimurium and B. ovis, respectively. As the disinfectant composed to povidine-iodine possesses bactericidal efficacy against animal pathogenic bacteria such as S. typhimurium and B. ovis, the disinfectant solution can be used to control the spread of bacterial diseases.

• Reproductive and Developmental Biology
• /
• v.37 no.3
• /
• pp.155-159
• /
• 2013

This study was carried out to investigate synthetic extender for semen cryopreservation of Jeju Native Black Bull. The semen was collected using an artificial vagina and transported to the laboratory. The semen was diluted 1:1 by Tris-Egg yolk extender and contrifuged in 1,500 rpm for 15 minutes. The supernatant was removed. The pellect was diluted to final sperm concentration of $2{\times}10^8/ml$ by doubling in every 30 minutes at $4^{\circ}C$ cold chamber. The semen was equilibrated for 4 hours at cold chamber and packed to 0.5 ml straw. The semen straws were located above 5 cm for 10 minutes. The height and duration affect the freezing speed by temperature. The frozen straw was plunged to $LN_2$. The presented straws were examined the viability and motility after thawed at $37^{\circ}C$ water bath. Frozen-thawed sperm were evaluated sperm viability, membrane integrity and acrosome integrity. Post-thawed sperm viability has been significantly higher (p<0.05) in fresh sperm ($93.27{\pm}1.62%$) than frozen-thawed sperm ($73.34{\pm}3.27%$). However, there were no significant differences between fresh and frozen-thawed dead cell rate ($7.35{\pm}2.63$ vs, $13.71{\pm}2.85$). In sperm motility, between Triladyl and AndroMed Extender, there was no significant different ($72.86{\pm}2.83$ vs, $81.47{\pm}2.48$), similarly, the dead cell rates was similar ($18.41{\pm}3.42%$ and $17.26{\pm}4.25$). The results of our study suggest that AndroMed to the freezing extender showed more positive effect on the frozen-thawed spermatozoa in Jeju Native Black bull semen.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.396-400
• /
• 1997

중수형 발전소에서 삼중수소 제거나 중수분리와 관련된 수소동위원소 교환반응에 이용되는 백금담지 고분자촉매제조시 환원과정 이전의 열처리 조건이 백금분산도에 미치는 영향을 관찰하였다. 고분자 담체(SDBC)에 함침법을 이용하여 백금을 담지시켰으며, 8$0^{\circ}C$의 공기중에서 그리고 15$0^{\circ}C$의 산소흐름하에서 열처리하여 제조한 Pt/SDBC촉매의 열적 안정성을 TGA와 BET 실험결과로부터 확인할 수 있었다. 백금담지량이 커지면 백금분산도가 감소하였으며, 가능한 한 고온의 산소로 열처리하면 고분자촉매의 백금분산도가 향상됨을 수소흡착 실험을 통하여 입증하였다.

• Vacuum Magazine
• /
• v.2 no.2
• /
• pp.49-58
• /
• 2015

진공 배기 시스템에 위험한 환경을 초래할 수 있는 모든 가능성을 찾아 낼 수는 없지만 누적된 현장 경험과 연구 결과에 맞추어 최대한 필요한 안전 조치들을 취해야 한다. 진공 배기 시스템이나 그 구성품들에 대한 심각한 파손을 유발하는 공통적인 요인들은 발화성 물질의 점화나 진공 배기 시스템의 배기구 막힘에 의해 발생한다. 따라서, 진공 펌프와 진공 시스템의 안전한 가동과 사용을 위해서는 다음과 같은 것들을 반드시 준수하여야 한다. ${\blacksquare}$ 발화성, 폭발성 공정 물질을 사용하는 진공 배기 시스템은 정규 유지 보수 작업(PM) 후 첫 번째 배기 과정은 매우 천천히 진행하여 진공 배기 시스템 내부에 급격한 난류가 형성되지 않도록 해 주어야 한다. ${\blacksquare}$ 진공 배기 시스템 내에서 발화성 물질들의 농도가 발화 영역(flammable zone, potentially explosive atmosphere)에 들어가지 않도록 하여야 한다. 이를 위해서는 불활성 가스를 이용하여 진공 펌프와 진공 배기 시스템의 가동 예상 조건이나 고장 환경하에서 안전한 농도 이하로 희석시켜야 한다. ${\blacksquare}$ 진공 펌프와 진공 배기 시스템에 장착되어 사용되는 밸브 등의 기계적 부품들이나 공정에 사용되는 물질과 공정 부산물들(by-products)로 인하여 배관, 필터 배기구 등이 막히지 않도록 하여야 한다. ${\blacksquare}$ 공정에 사용되는 물질들, 특히 산소($O_2$), 오존 ($O_3$) 등의 산화제 농도가 높을 때는 오일 회전 배인 진공 펌프(Oil rotary vane vacuum pump)에 미네랄(mineral) 오일을 사용하지 말아야 하며, PFPE(Perfluoropolyether) 오일을 사용하여야 한다. 시판되는 진공 펌프 오일 중 비발화성(non-flammable)으로 표기된 오일이라고 하더라도 산화제(oxidant)의 농도가 체적비로 30 % 넘는 공정 환경에는 사용하지 말아야 한다. ${\blacksquare}$ 진공 펌프와 진공 배기 시스템에 의해 배기되는 물질들이 물($H_2O$)과 격렬하게 반응하는 경우는 물이 아닌 다른 냉각제를 사용하여야 한다. ${\blacksquare}$ 안전하지 않다고 판단되는 상황에서는 해당 전문가의 조언이나 해당 전문가의 직접적인 현장 도움을 통해 문제를 해결하여야 한다.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.551-557
• /
• 1989

7-Alkyl-1,3-dihydroxyphenazine-5,10-dioxides were synthesized by the reaction of 1,3,5-trihydroxybenzene with 6-alkylbenzofuroxans which had been obtained from aniline and n-alkyl alcohols bearing butyl, hexyl and octyl group. 1,3-Dihydroxyphenazine-5,10-dioxide was also prepared by the reaction of 1,3,5-trihydroxybenzene with benzofuroxan. The surface tension of aqueous solutions of these phenazine dioxide derivatives was determined by surface tensiometer and it was found out that the surface tension decreased with an increase of the number of carbon in the alkyl group. The antimicrobial activities of these phenazine dioxide derivatives were investigated in terms of minimum inhibitory concentration by the common twofold dilution technique. The derivative bearing butyl group showed the highest activity among these derivatives examined. It was observed that the antimicrobial activity of these alkyl substituted phenazine dioxide derivatives was stronger than that of the unsubstituted phenazine dioxide derivative.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.124-124
• /
• 2000

다이아몬드에 버금가는 높은 경도뿐만 아니라 높은 화학적 안정성 및 열전도성 등 우수한 물리화학적 특성을 가진 입방정 질화붕소(cubic boron nitride)는 마찰.마모, 전자, 광학 등의 여러 분야에서의 산업적 응용이 크게 기대되는 재료이다. 특히 탄화물형성원소에 대해 안정하여 철계금속의 가공을 위한 공구재료로의 응용 또한 크게 기대된다. 이 때문에 각종의 PVD, CVD 공정을 이용하여 c-BN 박막의 합성에 대한 연구가 광범위하게 진행되어 많은 성공사례들이 보고되고 있다. 그러나 c-BN 박막의 유용성에도 불구하고 아직 실제적인 응용이 이루어지지 못한 것은 c-BN 박막의 증착직후 급격한 박리현상 때문이다. 본 연구에서는 평행자기장을 부가한 ME-ARE(Magnetically Enhanced Activated Reactive Evaporation)법을 이용한 c-BN 박막의 합성에서 적용한 증착공정 인자들의 변화에 따른 박리특성 고찰과 함께 다층박막화 및 제 3원소 혼입 방법을 적용하여 박리특성 향상 정도를 조사하였다. BN 박막합성은 전자총에 의해 증발된 보론과 (질소+아르곤) 플라즈마의 활성화반응증착(Activated Reactive Evaporation)에 의해 이루어졌다. 기존의 ARE 장치와 달리 열음극(got cathode)과 양극(anode) 사이에 평행자기장을 부가하여 플라즈마의 증대시켜 반응효율을 높였다. 합성실험용 모재로는 p-type으로 도핑된 (100) Si웨이퍼를 30$\times$40mmzmrl로 절단 후, 10%로 희석된 완충불산용액에 10분간 침적하여 표면의 산화층을 제거한 후 사용하였다. 박막실험실에서의 주요공정변수는 기판바이어스 전압, discharge 전류, Ar/N2가스유량비이었다. 합성된 박막의 결정성 분석을 FTIR을 이용하였으며, BN 박막의상 및 미세구조관찰을 위해 투과전자현미경(TEM;Philips EM400T) 분석을 병행하였고, 박막의 기계적 물성 평가를 위해 미소경도를 측정하였다. 박리특성의 고찰은 대기중에서의 자발적 박리가 일어나 90%이상의 박리가 진행된 시점까지의 시간을 측정하였고, 증착직후 박막의 잔류응력 변화와 연관하여 고찰해 보았다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.189-200
• /
• 1991

The purpose of this study is to examine the cut-off effect in aquifer by chemical grouting. Moreover, injection tests using specially prepared injection equipment of 1.5 shot system which hydrauric condition can be controlled are attempted to investigate the cut-off effect by confirming the gelling condition of samples according to the variation of flow velosity. And the permeability is measured according to changing of time by falling head test in order to consider the durability of grouts. Therefore to increase the cut-off effect in groundwater flow, shortening the gel-time according to the increasement of flow velocity, increasing the concentration and quantity of grouts(grouting ratio) according to the increasement of that, and as another direct method, contracting the distance between grouting holes or enlarging the grouting line should be done. These coefficients should be designed by data based on injection test in laboratory and field.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.175-184
• /
• 1991

Ultraviolet curable coatings are often used to protect the surface of polymer materials exposed to the ultraviolet radiation. However, the adhesion of epoxy acrylate on poly(vinyl chloride) and the UV curable coating on polystyren are poor. The objective of this work was to improve the adhesion of coating according to various formulations of the reactive diluents and finishing methods using the photografting of multifunctional acrylate and the surface activation on polymer surface impregnated a phtoinitiator. The addition of Tripropylene glycole diacrlate in the formulation of coating results in the improvement of adhesion of coating due to the flexibility. But the increase of the crosslinking density which results from the oxidation of surface during the exposure of UV radiation caused the loss of adhesion of coating exept the photografting method. In the trimethylolpropane triacrylate the improvement of adhesion are considerable due to the chemical bond between multifundtional acrylate and surface. From this work we expect to achieve the varity and functionality in the formulation of coating according to the photografting and surface activating of polymer.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.63-70
• /
• 2009

This study is part of an ongoing research project on the development of a sound-absorbing lightweight foamed concrete manufactured by a hydro-thermal reaction between silica and calcium. As the silica source, pulverized bottom ash was used, and as several cementitious powders of ordinary portland cement, alumina cement and calcium hydroxide were used. Manufacture of foamed concrete was accomplished using the pre-foaming method to make a continuous pore system, which is the method of making the foam by using a foaming agent, then making the slurry by mixing the foam, water, and powders. The experiment factors are W/B, foam agent dilution ratio, and foam ratio, and test items are compressive strength, dry density, void ratio, and absorption rate, as evaluated by NRC. The experiment results showed that the sound absorption of lightweight foamed concrete satisfied NRC requirements for the absorbing materials in most of the experiments. It is thus concluded that foam ratio was the most dominant factor, and significantly affected all properties of lightweight foamed concrete in this study. W/B rarely affected total void ratio and continuous void ratio as well as compressive strength, and dry density and foam agent dilution ratio also had little effect onalmost all properties. The analysis of the correlation between NRC, absorption time, continuous void ratio, and absorption time showed that the interrelationship of the continuous void ratio was high.

• Journal of Food Hygiene and Safety
• /
• v.31 no.4
• /
• pp.299-303
• /
• 2016

Salmonella spp. and Brucella spp. can cause considerable diseases on both humans and animals. In addition, these microorganisms cause the economic loss in animal farming and food industry. In this study, the disinfection efficacy of a disinfectant spray, composed to grapefruit seed extract, citric acid, malic acid and benzalkonium chloride, was evaluated against S. Typhimurium and B. ovis. A bactericidal efficacy test by broth dilution method was used to determine the lowest effective dilution of the disinfectant following exposure to test bacteria for 30 min at $4^{\circ}C$. The disinfectant and test bacteria were diluted with hard water (HW) or organic matter suspension (OM) according to treatment condition. On HW condition, the bactericidal activity of the disinfectant spray against S. Typhimurium and B. ovis was 5 and 4 fold dilutions, respectively. On OM condition, the bactericidal activity of the disinfectant spray was 2 and 1 fold dilutions against S. Typhimurium and B. ovis, respectively. As the disinfectant spray possesses bactericidal efficacy against foodborne pathogens such as S. Typhimurium and B. ovis, the disinfectant spray can be used to control the spread of bacterial diseases.