• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.23-29
• /
• 1970

This experiment is to improve the wrinkle recovery (W.R.) of silk fabrics. The silk fabrics is creased very well, and the crease is the serious defection of it. This experiment is to improve the nature by use of formaldehyde on fabrics. The reagents used were HCl, CH$_3$COOH, CaC$_2$, HCHO, Na$_2$CO$_3$, NH$_4$OH, NaOH and NaHCO$_3$. The silk fabrics was treated, to compare 1 he influence of conditions, by varying the quantities of reagents and the temperature of solution, and the reaction time. The cotton fabrics and the viscose rayon were sunk with the silk at the same condition to be compared the influence. 1) Those of the most suitable temperature to improve for the better W.R. are 75$^{\circ}C$ for silk, 35-45$^{\circ}C$ for cotton, and no particular temperature under 75$^{\circ}C$ for viscose rayon. 2) The W.R. improvements after treated at the temperature of 1) were 11％ for silk and 33.4％ for cotton. 3) There are the best treating time for every fabrics. They were 60 to 90 min. for viscose rayon when HAC Ras used for solvent. It took, however, 60min. of the best time for silk, 120 min. for cotton, and 40 min. for viscose rayon when acetic anhydride instead of HAC was used. 4) It was possible to improve 16.6％ of W.R. for silk at the most suitable treating time, 25.0％ for cotton, and 13.3％ for viscose rayon. 5) Acetic anhydride was rather more effective to improve W.R. of both silk and viscose rayon than HAC. 6) Treating time was also shorter in case of using acetic anhydride than HAC. 7) The improvement of W.R. were 8.3％ for silk at the 10 to 14 ml. of HCHO the best volume, 21. 5％ for cotton at 18m!. of HCHO, and 70％ of for viscose rayon at 14 to 18ml. of HCHO. 8) The most effective quantity of HCI is 14 ml. for both silk and cotton. The W.R. improvement of silk was 22.2％, and that of cotton 19.5％. 9) The W.R. of 83.3％ the best for silk and 61. 6％ for cotton were gained when 4.2gr. of NaHCO$_3$ brings down the percent of W.R. for both silk and cotton. 10) The more NaOH and NH$_4$OH as neutralizing agents, the less effectivity of W.R. until the quantities of the reagents are reached to a special range which are 3. 3m!. for silk and 3.3-6.6 ml. for cotton, and then we can see the W.R. increasing as the quantities of reagents are increased. These facts were evident in case of silk and cotton. We can also see with this fact that the reminder of 〔OH$\^$-/〕 neutralizing 〔CH$\^$+/〕in solution makes it possible to treat formaldehyde on fabrics. 11) Low curing temperature was comparatively better for silk, and high temperature better for cotton. 12) The result of this experiment shows that the Improvement of W.R. for silk was possible to 94％ which means 22％ W.R. increase compared to the untreated silk. This effect also shows that the improvement to W '||'&'||' W (wash and wear) of silk will be possible.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.164-170
• /
• 2001

The Self-propagating High-temperature Synthesis (SHS) for synthesizing ($Mo_{1-z}$ , $W_{z}$)$Si_2$was conducted experimentally with the mole fraction of Tungsten(W) from z=0.0 to z=0.5. The temperature profile was measured according to the reaction time through the thermocouple that was equipped into the center of these samples. When the reaction front is propagated around the thermocouple, the highest temperature appears and we regard this temperature as the adiabatic temperature. We found out by experimental results that the reaction velocity is in the range of 2.14~1.35mm/sec and the adiabatic temperature is in the range of 1883~1507K for the six samples. The reaction velocity and the adiabatic temperature were inclined to decrease with an increasing of the mole fraction of Tungsten (W). The SHS modeling is presented in order to predict the temperature profiles and these results are compared with the experimental results. It is predicted that in case of increasing the initial temperature of these six samples, the reaction temperature increased and that the sample of z=0.5 needs the preheating up to 800~900K in order to become reaction temperature 1900K.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.911-919
• /
• 1998

부탄테트라카르복실 산을 이용한 면직물의 DP 가공에서 가장 효과적인 촉매로 알려진 sodium hypophosphite(SHP)를 대체하기 위하여 carbodiimide 촉매의 효과를 알아보았다. Carbo야-imide 촉매로는 cyanamide(CY), dicyandiamide(DCY)와 disodium cyanamide(DSC)를 사용하였다. DCY와 DSC가 일반적으로 CY보다 좋은 방추도와 방축도 등을 보였고 또한 독성이 낮고 저장시 안정도 등이 우수하므로 산업적인 응용이 가능하다. 필요한 방추도와 물리적성질의 균형을 위해서 가공욕의 pH 조절이 가장 중요한 인자로 나타났다. 촉매존재시에 면과 부탄테트라카르복실산의 에스터화 가교 반응 메커니즘을 제아하였다. 또한 황화 염료로 염색된 염색포에 대한 가공 효과 분석시 carbodiimide 촉매가 SHP 보다 대체로 작은 색상 변화를 유발시켰다. 이러한 연구 결과는 부양화와 여러 염료의 색상 변화를 유발시키는 SHP를 사용하지 않고 부탄테트라카르복실 산과 carbodiimide 촉매를 이용한 무포름알데히드, 무인 가공제의 면직물 DP 가공의 가능성을 보여 주고 있다.

• Journal of the Korean Chemical Society
• /
• v.41 no.5
• /
• pp.266-270
• /
• 1997

• Proceedings of the Korea Water Resources Association Conference
• /
• 1994.02a
• /
• pp.423-429
• /
• 1994

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.280-284
• /
• 1998

신체 보호와 체온유지를 담당하는 피부는 인체 최대의 감각기관이다. 피부에는 온각, 냉각, 압력, 통증, 촉각, 진동 둥을 느끼는 외수용감각기들이 산재되어 있다. 그 중에서 촉감은 건축 자재, 필기구 재질, 자동차 내장재, 의류 원단과 안감 등 신체와 접촉하는 소재에 있어 제품의 질을 결정짓는 중요한 요소이다. 특히 섬유에서의 질감이란 경제적인 면과 직결되는 문제를 안고 있다.(중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.181-184
• /
• 1991

본 논문에서는 off-axis 평면 기준파의 각분할(angular multiflexing) 방식과 pseudo-inverse 알고리듬에 의한 SDF 필터를 결합하여 상관기를 구성하고 상관면에서의 상관반응을 관측하여, off-axis SDF 필터가 유형분류에 유용함을 입증하고, 광상관기로의 적용가능성을 보여주고자 한다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2006.04a
• /
• pp.101-105
• /
• 2006

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2007.11a
• /
• pp.133-134
• /
• 2007

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.49-56
• /
• 1996

TiO2/Ag 계 적층형 투명 열절연 박막의 최적 제작조건 설정을 위한 기초 연구로써, 스퍼터조건에 따른 결정구조 및 광학특성 변화거동을 관찰하였다. 반응성 스퍼터링에 의한 TiO2박막 제작조건에 따른 결정구조 및 광학특성 변화거동을 관찰하였다. 반응성 스퍼터링에 의한 TiO2 박막 제작시 Po2/PAr$\leq$0.2에서는 $\alpha$-TiO2 의 결정구조였으나, Po2/PAr$\leq$0.2에서는 기판 온도(RT-37$0^{\circ}C$) 및 열처리 온도(100-80$0^{\circ}C$)에 관계없이 non-stoichiometric 화합물로 판명되어, 산소 분압비가 TiO2 의 조성제어에 가장 중요한 변수로 나타났다. TiO2 박막은 열처리 온도의 증가(100-80$0^{\circ}C$)에 따라 굴절률이 증가(2.19-2.37)하는 경향이었는데, 이는 박막의 밀도증가에서 기인하는 것으로 판단된다. Ag 박막은(111)면과 (200)면이 우세한 결정립으로, 기판 온도(RT-37$0^{\circ}C$) 및 열처리(100-80$0^{\circ}C$)에 따라 등축상의 결정립 성장을 관찰할 수 있었다.