• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.674-684
• /
• 2020

To investigate the differences of bacterial- and archaeal communities depending on kind of wastewater (municipal/livestock) and on treating conditions of basins, sludges were sampled from 10 basins of 3 municipal wastewater treatment plants(WWTP) with A2O and a activated sludge sample from a livestock WWTP. The metagenomic DNAs of the sludge samples were extracted and amplified with primers, 27F/518R for bacteria and Arch519F/A958R for archaea, and pyrosequenced with Roche 454 GS-FLX Titanium. As results, the bacterial communities in basins of municipal WWTPs were quite different from those of livestock WWTP, but within the same municipal WWTP their community structures were similar to each other regardless of different environmental conditions such as O₂. And their archaeal communities resulted from anaerobic·anoxic basins were clustered only within communities originated from the same WWTP. Furthermore Seo-bu WWTP with high bacterial diversity and species richness performed better N/P-removal compared to the orther WWTPs.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.1
• /
• pp.50-57
• /
• 2016

We studied the Lab-scale process for the development of DNAM in aspect of safety and overall efficiency. Melamine is used for starting material of process, DNAM was synthesized by oxidation and nitration reaction. In order to optimize the process parameters with the product in higher yield and purity, a systematic study with variation of different parameters like molar ratio of nitrating mixture, conditioning time and order of reactant was carried out. The optimized reaction conditions for the synthesis of DNAM were : conditioning time of $3{\pm}3.5$ hour and nitrating mixture in 1:1.4 molar ratio. In order to proceed a stable reaction, melamine was added with enough time to relieve reaction heat. From these reaction condition, DNAM could be obtained in a yield of more than 60%.

• Journal of the Korean Society for information Management
• /
• v.20 no.4 s.50
• /
• pp.67-90
• /
• 2003

When we introduce knowledge management system in our organization, first of all, we need to change the way of motivating the members so as to voluntarily activate knowledge sharing activity For this, it is very important to establish fair evaluation and adequate reward system about knowledge contribution. In this study, I hypothesized a desirable evaluation and reward model for knowledge contribution on the basis of analysis of documents and cases concerning them in domestic enterprises and R&D institutes that adopted knowledge management. Also, I took a survey to analyze the response of the members of KAERI (Korea Atomic Energy Research Institute) about the evaluation and reward for knowledge contribution. I expect that the analysis results of this study can be applied very usefully in R&B institutes that want to introduce knowledge management.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.527-533
• /
• 1987

Kinetic studies on the complexing of aquamolybdenum(Ⅳ) trimer with thiocyanate have been carried out using the spectrophotometric method. The observed rate constant, $k_{obsd}$ is given by $k_{obsd}\;=\;{k_O + k_H[H^+]^2}(SCN^-) + k_r$. At 25$^{\circ}$C and ionic strength of 2.30 the values of $k_f$ and $k_r$ are $(3.78 {\pm} 0.61) {\times} 10^{-4}M^{-1}s^{-1}$ and $(6.93 {\pm} 2.39) {\times} 10^{-4}s^{-1}$, respectively. Activation parameters are ${\Delta}H^* = 50.71{\pm}6.91 kJmol^{-1}$ and ${\Delta}S^* = -121.65JK^{-1}mol^{-1}$. The mechanism is proposed and discussed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.1
• /
• pp.8-16
• /
• 2017

Structural integrity of solid rocket depends on the residual reactions between constituents of its composition(post cure, migration etc.), the oxygen(or anti-oxydent) in the free volume and humidity (desiccant) under the perfect sealed condition. Mechanical Properties of composite solid propellant arising from those factors are very complex. Moreover the propulsion are faced with thermal loads from diurnal & seasonal cycle till firing. In this study, the fast evaluation method of long term mechanical properties is suggested based on Thermo-Rheological Simplicity from curing oven to cool-down stage in view point of thermal stabilization. For this subject, endurance tester having temperature control capability are devised. From the results from incremental load and strain, non-linear characteristics are discussed.

• Journal of Aerospace System Engineering
• /
• v.13 no.4
• /
• pp.43-49
• /
• 2019

In this study, a test equipment which enables to feed endothermic fuel which is heated in the inside and outside environment of a high-speed vehicle and evaluate the heat exchangers' performance was designed and manufactured. For smooth operation of the test equipment, a test procedure that supplied endothermic fuel at high temperatures was established. The catalyst performance test was conducted based on the supply condition of the endothermic fuel and the amount of heat absorbed was analyzed. The validation of the test equipment was proved by comparing the results of catalytic reaction with the previous studies under similar reaction condition. This test equipment can be utilized in the endothermic reaction tests of catalyzed endothermic fuel under various conditions.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.379-388
• /
• 2003

The response of single story buildings and other case studies were investigated to observe trends and develop a better understanding of the impact of some design parameters on the seismic response of Concentrically Braced Frames (CBF). While many parameters are known to influence the behavior of braced frames, the focus of this study was mostly on quantifying energy dissipation in compression and its effectiveness on seismic performance. Based on dynamic analyses of single story braced frame and case studies, a bracing member designed with bigger R and larger KL/r was found to result in lower normalized cumulative energy ratio in both cases.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.161-166
• /
• 2003

To evaluate the performance of cadmium sulfide as a multi-function X-ray dosimeter, we made an X-ray detector that was based on cadmium sulfide using evaporation technology, and measured its response to X-ray exposure. The voltages of cadmium sulfide were measured on the various X-ray tube potentials, X-ray tube currents and exposure times. The regression analysis of the voltage response of CdS on the tube-potential variation was y=0.0995x-0.1146 ($R^2$=0.9595, $\sigma$=0.08, standard error=2%) and the regression analysis of the voltage response of CdS on the tube-potential variation was y=0.0439x+1.1891 ($R^2$=0.9021, $\sigma$=0.04, standard error=1.8%) The regression analysis of the voltage response of CdS on the X-ray exposure time variation was y=8.2853+5.5878 ($R^2$=0.7287, $\sigma$=0.06, standard error=1.9%). In conclusion, cadmium sulfide responded linearly to the variation X-ray conditions, suggesting cadmium sulfide to be a feasible X-ray sensor of multi-function dosimeter related instruments.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2007

Purpose: As increasing complexity of modern radiotherapy technique, more developing dosimetry is required. Polymer gel dosimeters offer a wide range of potential applications with high resolution and assured quality in the thee-dimensional verification of complex dose distribution such as intensity-modulated radiotherapy (IMRT). The purpose of this study is to find the most sensitive and suitable gel as a dosimeter by varying its composition ratio and its condition such as temperature during manufacturing. Materials and Methods: Each polymer gel with various ratio of composition was irradiated with the same amount of photon beam accordingly. Various polymer gels were analyzed and compared using a dedicated software written in visual C++ which converts TE images to R2 map images. Their sensitivities to the photon beam depending on their composition ratio were investigated. Results: There is no dependence on beam energy nor dose rate, and calibration curve is linear. Conclusion: The polymer gel dosimeter developed by using anti-oxidant in this study proved to be suitable for dosimetry.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.5
• /
• pp.440-448
• /
• 2003

Background : Development of rapid drug susceptibility testing provides the opportunity for rapid identification of individuals with drug resistant tubercle bacilli, allowing selection of appropriate therapeutic regimens. Methods : A total of 502 drug resistant isolates were subjected to reverse blot hybridization assay to detect mutations within genes (rpoB, katG, inhA, and ahpC) associated with rifampicin (RMP) and isoniazid (INH) resistance. Results : Among the 264 RMP resistant strains ($RMP^R$) tested, the most prevalent mutation was the Ser531Leu seen in 121 strains (46%). The second common mutation occurred in 84 strains (32%) at codon 526. And 27 strains (10%) showed the mutation at codon 516. Among all 469 INH resistant strains ($INH^R$), the katG mutation was responsible for INH. The inhA mutation was present in 88 strains (19%). In 11 isolates (2%), coexisting of the katG and inhA mutations were identified. Reverse hybridization assay successfully detected over 80% of $INH^R$ and over 92% of $RMP^R$ among Korean isolates. CONCLUSION: Reverse hybridization was useful for rapid detection of $INH^R$ and $RMP^R$.