• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.49-52
• /
• 2009

The response times of monopropellant thrusters at a pulse mode were investigated experimentally as design parameters and feed pressure conditions. Five different model thrusters as injection direction/uniformity, aspect ratio of reactor, volumes of manifold and chamber were designed. As a results, two parameters, aspect ratio and manifold volume, were directly related to response characteristics. Additionally, chugging instability at reaction chamber was observed when pressure drop across the catalyst bed was increased due to high aspect ratio or when low pressure was built at reaction chamber.

• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.12-16
• /
• 2007

Temperature control of an autothermal methanol reforming reactor which uses the copper-zinc oxide catalyst was studied. Temperature at 1cm below the hot-spot point in the reactor was used for the controlled variable, and the air flow rate was used for the manipulated variable. A first order plus time delay model was identified and controller parameters were obtained by applying the IMC-PI tuning rule to the identified model. With this controller, we could control the reforming reactor temperature within ${\pm}5^{\circ}C$ over 100 hours. Change of the hot-spot point due to the catalyst degradation was investigated and it could be used to design an adaptive controller.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.05a
• /
• pp.309-311
• /
• 2004

수용성 양이온 안료인 RhB를 대상으로 회전원판 광촉매 반응기와 열처리와 비열처리 방법으로 코팅된 고정화 광촉매를 이용하여 색 제거실험을 수행한 결과 다음과 같은 결론을 얻었다. 1. 회전원판 광촉매 반응기의 경우 설치하는 회전원판의 개수가 증가하면 반응면적의 증가로 반응속도가 증가하지만 일정 거리이하로 설치되면 광과 원판과의 접촉이 방해받아 반응면적 증가 효과를 감소시키는 역할을 하며, 원판 사이의 최적 거리가 존재하는 것으로 나타났으며, 본 실험범위에서는 약 11.2 mm인 것으로 나타났다.

• Clean Technology
• /
• v.15 no.2
• /
• pp.130-136
• /
• 2009

Commercial catalyst (Cu-Zn/$Al_2O_3$, Johnson Matthey Co., 83-3 Catalyst) was applied to the hydrogen production by steam reforming of methanol in the micro-channel reactor (MCR). The steam reforming of methanol was tested over Cu-Zn catalyst at temperatures in the range of 200 and 300$^{\circ}C$, the catalyst size of 0.05${\sim}$2.2 mm, the space velocity of 3,000${\sim}$10,000 $hr^{-1}$ in a fixed bed continuous flow reactor. The conversion of methanol and the yield $H_2$ preferred high temperatures and low space velocities, and had optimal results with the particle size of 0.35 mm. Based on the results from experiments with fixed bed reactor, two types of MCR, boat bed and stacked bed MCRs, were studied. The stacked bed type MCR showed better methanol conversion compared with the boat type one.

• The Microorganisms and Industry
• /
• v.20 no.2
• /
• pp.41-45
• /
• 1994

실관막은 단위부피당 표면적이 커서 상과 상간의 물질전달속도를 증가시킬수 있다는 장점때문에 효소, 미생물, 동식물의 고정화 반응기로써 많은 연구가 진행되어 왔다(1,2). 실관반응기는 이러한 장점이외에도 고정화가 수월하며, 생산물과의 1차분리가 이루어지며, scale-up시 에너지 소모가 적다는 장점을 가지고 있다. 그러나, 불용성 기질을 사용할 경우, 실관막 기공의 막힘으로 인해 장시간의 조업이 어렵고, 고분자 재질 실관막의 경ㅇ, 몇몇 특수 재질을 제외하고 고온/고압 멸균이 불가능하다는 단점을 지니고 있다. 또한 반응기의 구조상 기체의 원할한 공급이 어려우므로 산소소비속도가 빠른 호기성 미생물 배양을 위해서는 이중실관막과 같은 특수설계의 실관 반응기가 이용될 수 있다(3,4). Fig. 1은 독일 Enka사의 polypropylene 실관의 단면과 전형적인 조업방식을 보여준다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.426-430
• /
• 2012

본 연구에서는 3차원 수치 해석 기법으로 SDR 반응기 내 유동 특성을 모사하여 유동 분포 및 체류 시간등을 확인하고 혼합 특성 개선을 위한 방법에 대해 연구하였다. 본 연구 대상 SDR 반응기는 입구 덕트와 반응기 본체의 접속 구간에 가이드 베인(Guide vane)이 설치되어 있고 그 바로 하부 지점에 흡수제를 분무하는 노즐이 설치되어 있다. 이는 처리가스가 반응기로 유입될 때 가이드 베인에 의해 선회류를 형성하여 분무된 흡수제와의 혼합을 촉진시키기 위한 목적으로 설치하였다. 시간당 1,971$m^3/min$ at $260^{\circ}C$의 처리가스가 반응기 상부로 유입되어 가이드 베인을 거쳐 선회류를 형성한 후흡수제와 혼합되어 하부로 배출되는 구조이다. 유동 특성을 분석한 결과, 처리가스가 반응기 중앙으로 강하게 편중되고 있었으며 반응기 양 측면으로 부상 기류가 형성되고 있음을 확인할 수 있다. 또한 강한 편류에 의해 체류시간도 매우 짧은 것으로 판단되는 바, 가이드 베인의 기류 안내 각도가 적합하지 못함을 확인할 수 있었다. 이는 곧 혼합 특성 저하에 따른 미반응 액적의 다량 발생과 함께 고착에 의한 스케일 형성 가능성이 매우 클 것으로 예상되므로 혼합 특성을 개선할 수 있는 설계 변경이 필요할 것으로 판단되었다. 따라서 편류를 해소하고 노즐 근처에서의 체공시간을 확보할 수 있도록 가이드 베인의 안내 각도를 더 크게 변경한 결과, 기존 설계상에서 본체 중앙에 형성되는 편류가 해소되고 선회류의 전개 각도가 커지면서 체류시간 역시 약 5초 이상으로 유지되고 있음을 확인할 수 있었다. 따라서 가이드 베인의 각도만 변경하더라도 본체 형상의 추가적인 변경없이 유동의 혼합 특성을 개선시킬 수 있을 것으로 판단되었다.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.337-343
• /
• 2013

Membrane reactors have been showing a promising future and attracted increasing attention in the scientific community as they possess advantages in terms of enhanced catalytic activity and selectivity, combination of processes (reaction and separation), simplicity in process design, and safety in operation. In particular, solid electrolyte membrane reactor principles are realized in fuel cells, electrolyzers and reactors for hydrogenation of carbon dioxide and other economically viable reactions. In this review, as a young generation of ion conducting materials, high temperature proton conductors are discussed in terms of the current status of material development and their various applications.

• Clean Technology
• /
• v.19 no.2
• /
• pp.156-164
• /
• 2013

In this study, we analyzed the operational characteristics of a 0.25 MW methanation pilot plant. Isothermal reactor controled the heat released from methanation reaction by saturated water in shell side. Methanation process consisting of isothermal reactor and adiabatic reactor had advantages with no recycle compressor and more less reactors compared with methanation process with only adiabatic reactors. In case that $H_2$/CO ratio of syngas was under 3, carbon deposition occurred on catalyst in tube side of isothermal reactor and the pressure of reactors increased. In case that $H_2$/CO ratio was maintained around 3, no carbon deposition on catalyst in tube side of isothermal reactor was found by monitoring the differential pressure of reactors and by measuring the differential pressure of several of tubes filled with catalyst before and after operating. It was shown that CO conversion and $CH_4$selectivity were over 99, 97%, respectively, and the maximum $CH_4$productivity was $695ml/h{\cdot}g-cat$.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.542-548
• /
• 2005

A fluidized bed reactor containing porous media has been known to be effective for nitrogen and organic matters removal in wastewater. The porous media which attached microbes plays important roles in simultaneous nitrification/denitrification (SND) due to coexistence of oxic, anaerobic and anoxic zone. For SND reaction, oxygen and organic substrates should be effectively diffused from wastewater into the intra-carrier zone. However, the overgrowth heterotrophic microbes at the surface of porous media may restrict from substrates diffusion. From these viewpoints, the existence and effect of heterotrophic bacteria at surface of porous media might be the key point for nitrogen removal. A porous media-membrane hybrid process was found to have improved nitrogen removal efficiency, due to stimulated denitrification as well as nitrification. Microelectrode studies revealed that although intra-media denitrification rate in a conventional fluidized bed was limited by organic carbon, this limitation was reduced in the hybrid process, resulting in the increased denitrification rate from 0.5 to $4.2\; mgNO_3-N/L/hr$.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.87-95
• /
• 1997

A chemical heat pump based on the reversible reactions between metal chlorides and ammonia gas is attractive alternative to compression system and liquid absorption systems in cooling and refrigerating fields. The advantages of chemical heat pump are no regulatory constants due to CFC refrigerants, utilization of gas, industrial waste heat, electricity, fuel oil etc. as heat sources and wide applications to energy storage system, large-scale energy managements for industrial process. The scale-up of chemical heat pump from laboratory prototype to pilot plants necessitates the interpretation of system performance and evaluation of dynamic behavior in the chemical reactor. This study contains the prediction of performance of chemical refrigerator according to operating condition, the dynamic simulations through reactor modelling, which is used for the calculation of reactive medium temperature and the conversion variation with reactor cooling temperature, and the effect survey of block parameters on the power of refrigerator.