• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1131-1140
• /
• 2004

In this paper, we proposed a flate-plate antenna employing semi-annular slots for satellite broadcast reception. The radiating element of the antenna is dual annular slots fed by a strip dipole, which have a wider bandwidth than the rectangular slot. A $16{\times}16$ array antenna is designed using stripline T-junction power dividers. Measurements of the fabricated antenna show a gain of 28.0$\~$29.5 dB in 11.7$\~$12.8 GHz frequency range.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.417-424
• /
• 2014

In this paper, a dual-band circular ring monopole antenna with semi-circular strip for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of half circular strip for dual-band operation which cover WLAN and WiMAX frequency bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are obtained for WLAN/WiMAX frequency bands.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.270-277
• /
• 2021

In the power ultrasound fields, the flange position for fixing the transducer is an important factor influencing on electro-mechanical efficiency of the transducer. We suggested a practical method that can determine the installation position of the flange for different resonance modes of the bolt-clamped type Langevin ultrasonic transducer. A semicircular wedge-shaped jig was manufactured and moved along the lateral surface of the transducer. The vibration characteristics were examined after a constant pressure was applied to the semicircular wedge-shaped jig. By observing the change of the input admittance of the transducer depending on the position of the pressure application, the optimum position for the flange installation could be determined. The resonant modes of the transducer were calculated by a Mason's equivalent circuit, and the particle velocity distribution for each resonance mode was calculated by a transmission line model. Since the optimum positions determined from an experimental result show a good correspondence with the node positions of the vibration modes calculated by the transmission line model, the validity of the suggested method was verified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.119-126
• /
• 2001

유리와 같이 취성이 큰 재료의 파단면을 주의하여보면 반원형의 곡선이 이따금씩 여러개 나타나 있는 것을 볼 수 있다. 이것은 진행 중에 있는 균열이 어떠한 부분으로부터 나온 음파(횡파)와 만났을 때 일어나는 흔적으로 Wallner선 이라고 한다. 초음파 Fractography는 파괴 시험시 강력한 초음파를 사용하여 파단면에 이와 같은 Wallner 선을 인공적으로 발생시켜, 파면해석을 통하여 파괴속도등 파괴연구에 필요한 정보를 얻는 수법이다. 이 수법은 유리와 같은 비정질 탄성태의 파괴속도 측정을 위해 Kerkhof에 의해 최초로 고안되었으며, 수지와 같은 점탄성재료에 대해서는 Takahashi에 의하여 PMMA(Polymethy1 Methacrylate)재에 강력한 초음파를 사용하여 그 가능성이 제기된 이후 PMMA와 EPOXY재등의 점탄성재료의 파괴속도측정과 파괴강성등의 측정에 본격적으로 연구되기 시작하였다.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.170-174
• /
• 2021

As the rising attention to the medical and healthcare issue, Bio-MEMS (Micro electro mechanical systems) platform such as bio sensor, cell culture system, and microfluidics device has been studied extensively. Bio-MEMS platform mostly has high resolution structure made by biocompatible material such as polydimethylsiloxane (PDMS). In addition, three dimension structure has been applied to the bio-MEMS. Lithography can be used to fabricate complex structure by multiple process, however, non-rectangular cross section can be implemented by introducing optical apparatus to lithography technic. X-ray lithography can be used even for sub-micron scale. Here in, we demonstrated lines with round shape cross section using the tilted gold absorber which was deposited on the oblique structure as the X-ray mask. This structure was used as a mold for PDMS. Molded PDMS was applied to the cell culture platform. Moreover, molded PDMS was bonded to flat PDMS to utilize to the sub-micro channel. This work has potential to the large area bio-MEMS.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.319-321
• /
• 2019

본 논문에서는 수학교육용 소프트웨어에서 확률적 현상을 경험한 이후 과학 그래프 해석에 있어 확률론적 관점을 도입하여 해석하는 학습자의 관점의 변화를 제시한다. 이 연구에서 11명의 고등학교 1학년 학생은 수학교육용 소프트웨어인 지오지브라(GeoGebra)를 활용하여 학습자가 평면 상에서 수직선이나 반원 위에 점을 찍는 활동을 통하여 기하학적 확률을 경험하였으며 이와 같은 경험을 토대로 물의 상평형 그래프를 해석하였다. 물의 상평형 그래프에 나타나는 얼음(고체), 물(액체), 수증기(기체)의 상태 변화에 대하여 각 상태가 나타나는 온도-압력의 영역 간의 경계에 대하여 학습자는 기하학적 확률을 적용하여 해석하려고 하였으나 경계선 위의 온도-압력의 물의 미시적 구조를 표현하는 과정에서 4명의 학생만 확률론적 관점으로 해석하고 그렇지 못한 학생들은 상태의 공존을 물질적 관점이나 과정적 관점으로 이해하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2006

This paper presents the techniques developed using the line source method to internally generate waves on an arc in a rectangular grid system. For five different types of wave generation layouts, quantitative experiments were conducted under the following conditions: the propagation of waves on a flat bottom, the refraction and shoaling of waves on a planar slope, and the diffraction of waves to a semi-infinite breakwater. Numerical experiments were conducted using the extended mild-slope equations of Suh et al. (1997). The fifth type of wave generation layout, consisting of two parallel lines connected to a semicircle, showed the best solutions, especially for a small grid size.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.