• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.186-190
• /
• 1998

We fabricated a diode-side pumped high power Nd:YAG laser with a gold coated flow tube(diameter of 10mm) and three sets of 140W diode bar. The diameter of Nd:YAG rod was 6mm and its length was 130mm. We obtained 130W cw power from a linear resonator with an 11% output coupler, which corresponds to the slope efficiency of 43% and the optical efficiency of 31%. The measured beam quality factor(M$^2$) reached about 85 which is fairly large due to the large size of the rod. Thermal lensing of the rod was measured to be 5.3-7.4D/$kW_{pump}$ when the laser was operating.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.237-245
• /
• 2011

Purpose: The present study was conducted to investigate whether certain repeated physical and/or chemical stimuli added on ophthalmic lenses might induce any changes of the functions of lens coatings. Methods: The changes in lens surface, light transmittance, foggy duration, durability of ophthalmic lenses were determined after the application of tearing-off with tape, rubbing with acetone, soaking in acetone or distilled water of ophthalmic lens (CR-39 material) as physical and/or chemical stimuli. Results: The change of ophthalmic lens surface was detected after soaking in acetone for longer than 30 minutes by observing the lens surface to figure out the functional change of hard coating. The ophthalmic lens soaked in distilled water for 180 minutes showed little functional change of anti-reflection coating as 1% by measuring light transmittance of lens. However, the function of anti-reflection coating was almost disappeared after the ophthalmic lens was soaked in acetone for 60 minutes. The foggy duration of ophthalmic lens soaked in acetone was increased by estimating foggy duration of lens. The lens coating was shown to be defected when the pre-damaged ophthalmic lenses were torn off with tape, rubbed with acetone and soaked in distilled water or acetone by observing pre-damaged lens surface to evaluate its durability. Conclusions: The careful management during ophthalmic lens dispensing or usual eyeglass wearing is needed since the change in ophthalmic lens coatings was shown by repeated physical and/or chemical stimuli.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.79-87
• /
• 1997

Anti-reflective and anti-static double layered films were prepared on the VDT panel by sol-gel spin-coating method. Their electrical, opticla, and mechanical properties were investigated. The outer SiO2 film with low re-fractive index was coated over the inner ATO(Antimony-doped Tin Oxide)-SiO2 film which was prepared by mixing ATO sol with SiO2 at molar ratio of 68:32 to satisfy the interference condition of double layers. The heat treatment was conducted at 45$0^{\circ}C$ for 30 min where residual organics were completely removed. The sheet resistance of ATO single layer showed the minimum value of 6$\times$107$\Omega$/$\square$ at 3 mol% addition of Sb and that of SiO2/ATO-SiO2 increased slightly with increasing SiO2 mol% up to 30 mol%, and then increased steeply to the value of 3$\times$108$\Omega$/$\square$ at 32 mol%. The reflectance of double layered films was about 0.64% at the wavelength of 550nm and the transmittance increased about 3.20%. The hardness of double layered films was almost the same as that of uncoated VDT panel, 471.4kg.f/mm2.

• Korean Journal of Optics and Photonics
• /
• v.4 no.2
• /
• pp.168-172
• /
• 1993

We measured the spectral transmittance of the cholesteric mixtures of ZLI-1167 and CB15 for various weight fractions of CB15 in the mixture to find out the relationship between the center wavelength of the selective reflection band and the weight fraction of CB15 in the mixture. Left handed circular polarizer for 632.8 nm was designed and fabricated with this mixture whose weight fraction of CB15 was 33.19%. The ellipticity of the elliptical polarization of the transmitted light was measured to be 0.98 showing excellent property of the CLC circular polarizer.

• Journal of the Korean Vacuum Society
• /
• v.4 no.1
• /
• pp.32-39
• /
• 1995

SnO2/AI/Ag/AI/SnO2층 구조로 이루어진 열처리 가능한 열선반사막을 직류 스퍼터링법에 의해 soda-lime silicate 유리위에 형성시켰다. 이 코팅유리를 $650^{\circ}C$에서 열처리하면 가시광선 투과율 85%이상, plasma wavelength 970nm 이하를 얻을 수 있었다. 따라서 이 구조의 막은 유리 곡가공에 견디는 열적 안정성을 나타내었으며, 코팅유리의 열처리에 따른 전기적 특성 및 열적 안정성은 각각 Ag와 AI층의 두께에 의존하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.120.1-120.1
• /
• 2011

Increase the efficiency of PV modules for high-efficiency solar cells, light transmittance improvements, increasing the module, and much more research and development. Dual we light transmittance for photovoltaic module materials in low iron tempered glass in SiO2 using liquid AR implementation, light transmittance to solar modules to increase the efficiency of research.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.30.2-30.2
• /
• 2011

태양광을 이용하는 태양전지의 경우, 태양전지에 도달하는 입사광량은 태양전지의 효율과 직접적인 연관이 있다. 이러한 입사광량을 증가시키기 위해서 다양한 연구가 진행되고 있다. 표면에서의 광손실을 줄이기 위해 반사방지층을 형성하고, 광경로 확장 및 광트랩을 위한 기판 텍스처링 방법은 태양전지의 효율을 증가시키기 위해 꾸준히 연구되어 왔다. 본 연구에서는 불규칙적인 배열을 갖는 마이크로-나노급 패턴을 박막 태양전지용 유리기판 위에 형성함으로써 기판의 확산 투과율을 향상시키고, 광확산에 의한 내부 광경로 확장 효과로 태양전지의 효율을 증가시키고자 한다. 박막 태양전지용 유리기판에 불규칙적인 배열을 갖는 마이크로-나노급 패턴을 형성하기 위해, 기존의 패턴 형성 기술에 비해 공정이 간단하고 비용이 저렴한 나노 임프린트 리소그래피 기술을 이용하였다. 실험순서는 제작된 마스터 템플릿의 확산 패턴을 역상을 복제 하여 임프린트용 mold를 제작하고, 이 mold를 이용하여 박막 태양전지용 유리기판 위에 확산 패턴을 형성하였다.

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.91-96
• /
• 2015

Optical modeling and characterization of transparent dye-sensitized solar cells (DSC) are presented to design and estimate DSC devices numerically. In order to model the inhomogeneous active layer of DSC, the porous structure of titanium oxide ($TiO_2$) and dye mixture, we prepared films consisting of layer by layer of the DSC's basic materials sequentially, and characterized the optical parameters of the films with the effective refractive index, which was extracted from the transmittance and reflectance measurements in ultra violet to near infra-red range. By using the effective refractive index, we made the optical model for DSC, and demonstrated that the optical model based on effective refractive index can be used to design and evaluate the performance of transparent-type DSC modules.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.225.2-225.2
• /
• 2013

실리콘기반의 광전변환 소자는 소자공정의 편의성, 소자 신뢰성, 화학적 안정성, 그리고 저가경쟁력 등의 이점 때문에 수 십 년간 널리 연구되어 왔다. 그러나, 실리콘 재료의 경우 높은 굴절률로 인해 표면에서 높은 광 반사도를 가지고 있다. 일반적으로, 태양전지의 광전변환 효율은 빛이 서로 다른 유전율을 가진 계를 통과할 때 발생하는 계면반사로 인한 물리적인 한계를 가진다. Indium Tin Oxide (ITO)는 발광 다이오드, 태양전지, 그리고 광 검출기 등의 광소자에 적용하기 위해 수 년간 투명전도 산화막 재료로서 연구되어 왔다. ITO의 뛰어난 광학적, 전기적 특성은 높은 투과도와 낮은 전기 전도도를 요구하는 소자 응용에 대해 유망한 후보로 거듭나게 했다. 게다가, ITO의 굴절률은 대략 2정도이다. 그 결과, ITO는 반도체 기반 태양전지의 무반사 코팅 소재로서도 장점을 가지고 있다. 본 연구는 전자빔 증착법으로 경사입사 증착을 하여 실리콘 기반 태양전지에 증착될 ITO 박막의 굴절률을 조절한다. 여기서, 실리콘의 굴절률은 대략 3.5정도이다. 그러므로, 더 나은 광학적 특성을 가지기 위해 다층으로 올려진 ITO 박막이 점진적인 굴절률 변화를 가지는 것을 필요로 한다. 점진적 굴절률 변화를 가진 무반사 박막이 실리콘 태양전지의 특성에 미치는 영향을 평가하기 위해 광전변환 효율을 측정하였다. 증착된 박막의 굴절률과 표면형상은 각각 타원편광분석과 Atomic Force Microscopy (AFM)을 통해 분석되었다. 또한, 소자의 단면형상은 Scanning Electron Microscopy (SEM)으로 측정되었다.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.483-491
• /
• 2016

Even though the antifogging property of nanosilica coated glass surface is highly increased due to the hydrophilic hydroxyl groups on nanosilica surface, the durability of this property on outdoor glass was diminished rapidly after rain washing. In addition the topology of nanosilica coated glass surface plays very important roles to control an light transmittance or antireflection property. To improve these coating durability and characteristics a hydrophilic nanosilica coating on glass was prepared by coating with 1.5 wt% of nanosilica (Ludox) suspension in the presence of hydrolyzed tetraethylorthosilicate (TEOS). The optimum hydrolysis condition of TEOS in acidic or basic aqueous solution was also examined by contact angle measurement. The final transparent hydrophilic coating layer coated with nanosilica-TEOS in acidic condition (pH=4) showed much improved durability of hydrophilic surface as well as higher visible light transmittance than original uncoated glass by 2 % point.