• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.191-197
• /
• 2006

We analyze the self-pulsation(SP) characteristics due to mode beating of two modes emitted in a multi-section complex-coupled (CC) DFB laser composed of two DFB sections and a phase control section between them. SP frequency due to mode beating of the two modes is determined by the difference of grating periods in the two CC DFB regions. As the difference of grating periods in the two CC DFB regions increases, the SP frequency increases from very low frequency to the THz region. In the case of a mode which is not located in the stop band of the other DFB region, the mode propagates into the other DFB region without a high reflection, so that output powers emitted in a multi-section CC DFB laser have high modulation indexes due to the large interaction between the two modes.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.208-218
• /
• 2008

We investigate the effect in terms of yield of the reflectivity of both facets and of the phase of a phase tuning section on the self-pulsation (SP) characteristics of multisection complex-coupled (CC) DFB lasers with self-pulsation frequency of the THz region. When the grating phases on both facets of a multisection CC DFB laser are fixed as 0, the variation of SP frequency increases as the reflectivity of both facets increases, while that of SP frequency decreases as the coupling ratio (CR) and the coupling strength increase. For the coupling strength of 3, the range of the phase of a phase tuning section with yields greater than 80% decreases as the CR and the reflectivity of both facets increases. For the coupling strength of 4, the range of the phase of a phase tuning section with yields greater than 80% increases as the CR and the reflectivity of both facets increases.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.800-803
• /
• 2012

본 논문에서는 SATA(Serial Advanced Technology Attachment) 커넥터의 차동 임피던스를 정합하여 신호 전달 특성을 개선한다. 3차원 FEM(Finite Elements Method) 전자기장 시뮬레이터를 이용하여 SATA 커넥터의 차동 모드 S-파라미터를 추출하고, 신호 전달 특성을 분석한다. SATA 커넥터의 반사 손실 ($S_{dd11}$)은 5 GHz 까지 20 dB 이하의 값을 나타내고, 삽입 손실($S_{dd21}$)은 0.1 dB 이하의 값을 나타낸다. 또한 인덕턴스, 커패시턴스, 상호 인덕턴스, 상호 커패시턴스를 추출하여 차동 임피던스를 계산한다. SATA 커넥터의 차동 임피던스는 107.3 ${\Omega}$으로 부정합이다. 차동 임피던스를 정합하기위해서 커넥터 신호 핀을 dx 방향으로 설계 변경한다. $d_x$ 방향으로 0.04 mm 증가 시켰을 때 차동 임피던스가 99.5 ${\Omega}$으로 최적으로 정합되었다. 또한 반사 손실은 1.5 GHz 에서 11 dB 개선되고, 삽입 손실은 최대 약 0.05 dB 개선되었다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.2
• /
• pp.1-6
• /
• 2003

A theoretical method for the TE polarized electromagnetic scattering on a periodic strip grating over a grounded dielectric slab is considered. The numerical results for an analysis of the plane wave scattering from the structure are presented such as normalized mode amplitude and relative reflected power against normalized dielectric slab height, relative reflected power against angle of incidence and distribution of strip current density. Detailed discussions on the Bragg blazing phenomena observed in the geometry are give.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.201-207
• /
• 1999

The fiber-optical confocal scanning interference microscope with a simple configuration was constructed with a 4-port fiber-optic coupler, and the new method based on the phase shifting method was proposed for surface profiling by the system. In the method, the height of a specimen was determined from the phase of confocal beam. It was verified experimentally that the method was applicable to even the confocal interference microscope with a long-wavelength source and a low NA objective, and that the scanning time could be drastically reduced compared with the conventional method. Finally, it was found that our method is less sensitive to the variation of surface reflectivity than the conventional method.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.235-239
• /
• 2001

In this paper, we propose an optical configuration of a reflective AFLC display mode using a half-wave AFLC cell in which inplane tilt angle is $22.5^{\circ}C$. To check the validity of our design, we fabricate a reflective half-wave AFLC cell of which the in-plane tilt angle is $24.9^{\circ}C$, and measure viewing angle and visible spectra characteristics. In the results, the half-wave AFLC cell in the reflective configuration exhibits wide viewing-angle as well as high brightness and contrast. trast.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.52-59
• /
• 2006

To construct its complex permittivity from the reflection coefficient of a thin film such as PCB substrate measured by open-ended coaxial probe, an integral equation is formulated using modal analysis and equivalent source. The accuracy of the conversion model based on the integral equation is confirmed in both cases of converted complex permittivities calculated from numerically computed and actually measured reflection coefficients. And the maximum valid frequency of open-ended coaxial probe is limited by the size of its flange.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.96-99
• /
• 1998

In this study, a novel long term stabilization method of optical feedback for the resonant cavity coupled semiconductor lasers is proposed, and its utility was shown experimentally. The proposed method is realized by using the pahse discriminator of optical feedback with high gain. The phase discriminating signal was obtained by the polarization spectroscopic technique using reflection light from the external reflector, which is a confocal Fabry-Perot cavity. Experimental result shows that stable control state can be maintained up to 20 hours. The period can be increased by reducing size of the system and/or fixing position stably of optical parts used, which were arranged on an optical table by using magnetic bases in this experiment. The proposed long-term stabilization method of optical feedack of a resonant external cavity coupled semiconductor laser is very useful for the field of high sensitivity measurement, and for the use in the laboratory level in particular.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.108-113
• /
• 2014

This paper presents the influence on the transmission characteristics of swelling in rectangular waveguides for Q-band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a swelling is calculated by using internal impedance in order to investigate the influence of swelling in the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.722-729
• /
• 2013

This paper presents the influence on the transmission characteristics of dimensional tolerances of rectangular waveguides usually used as a low-loss transmission line in the millimeter-wave band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a post is calculated by using internal impedance in order to investigate the influence of dimensional tolerances of the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.