• Information Display
• /
• v.5 no.5
• /
• pp.10-12
• /
• 2004

우수한 화질특성을 나타내는 새로운 반투과형 액정모드를 개발했다. 단일 셀캡 구조에서 감마(Gamma) 보정없이 투과모드와 반사모드를 동시에 구동하기 위해 유기막을 이용하여 반사모드 영역의 액정 Cap을 두 가지로 분리하는 새로운 설계구조를 도입했다. 반사모드 영역의 액정 Cap을 순수한 액정 $Cap(C_{LC})$과 유기막 $Cap(C_{OL})$으로 분리함으로써 액정에 걸리는 실제 전압을 조절하게 되어 단일 셀캡 구조에서도 감마 보정없이 우수한 특성을 나타내는 반투과형 VA 액정모드를 개발하였다. 이러한 Cap-Divided 방식의 신규 VA 액정모드는 높은 콘트라스트, 광시야각 특성 및 공정 단순화의 장점이 있기 때문에 향후 반투과형 LCD에 적극적인 채용이 기대되어진다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.118-119
• /
• 2000

최근에 많이 사용되는 휴대용기기의 표시장치인 액정표시장치를 보면 반사형 액정표시장치가 많이 사용되고 있다. 반사형 액정표시장치는 표시장치의 전력소모의 많은 부분을 차지하는 backlight 를 주변 광원으로 대체하여 전력소모를 줄일 수 있는 표시장치로서 많이 연구되고있다. 최근에 연구되고있는 반사형 표시장치를 살펴보면 반사형 TN (Twisted Nematic) LC 모드가 주류를 이루고 있으나 콘트라스트비가 낮은 단점이 있다$^{[1]}$ . 이를 극복하기 위하여 반사형 VA (Vertical Aligned) LC 모드가 제시되어진다. VA LC 모드는 TN LC 모드와 반대로 음의 유전율 이방성을 가지는 액정물질을 이용하여 유리기판에 수직으로 배향시킨 모드로서, 전압이 인가되지 않은 초기상태에는 액정 cell 이 복굴절을 전혀 나타내지 않는다. TN LC 모드와 정확히 역의 구조를 가진다. 그리하여 초기상태에서 편광판 한 장과 광대역 λ/4 위상지연판을 사용하여 뛰어난 어두운 상태를 구현할 수가 있다. (중략)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.36-42
• /
• 2000

We calculate the facet reflectivity as a function of the waveguide width of buried channel waveguides using the angular spectrum method and the field profiles obtained by the effective index method, the variational method and the modified variational method, respectively and discuss the results. As the waveguide width increases, the facet reflectivity of buried channel waveguides approaches to that of slab waveguides. As the waveguide width decreases, the facet reflectivity of quasi-TE mode decreases from that of slab waveguides, while that of quasi-TE mode increases from that of slab waveguides. The variation of the facet reflectivity of quasi-TE mode as a function of waveguide width is much larger than that of quasi-TM mode. When the aspect ratio is one, the difference between the facet reflectivity of quasi-TE mode and that of quasi-TM mode using the variational method and the modified variational method is negligible, while the difference between the facet reflectivity of quasi-TE mode and that of quasi-TM mode using the effective index method is large. In the case of quasi-TE mode, the facet reflectivity using the angular spectrum method and the field profiles obtained by the modified variational method could be more accurate than that obtained by the effective method. In the case of quasi-TM mode, the facet reflectivities obtained by the various methods are almost the same.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.298-305
• /
• 2003

We have calculated the single mode yield of index-coupled (IC) DFB lasers above threshold for several kL, and facet reflectivity combinations, and investigated the correlation between those results and the single mode yield as a function of f number at the threshold. As a result, there is little correlation between the single mode yield above threshold and the single mode yield as a function of f number at the threshold. The single mode yields above threshold for kL of 0.8 and 1.25 is larger than those for kL, of 2 and 3 due to the spatial hole burning effect. Also, we have investigated the effect of the reflectivity of the AR facet on the single mode yield for AR-HR and AR-CL combinations. For AR-HR combinations, the single mode yield increases as the reflectivity of the AR facet decreases. However, for AR-CL combinations, the reflectivity of the AR facet for the largest single mode yield exists. In the single mode yield calculations for IC DFB lasers in this paper, the single mode yield for kL of 0.8 with AR(1％)-HR combination is largest above threshold.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.126-130
• /
• 1991

다이오드 레이저의 능동형 모드락킹 구조로부터 극초단 광펄스를 발생시켰다. 모드락킹된 광펄스를 얻기 위해 다이오드 레이저의 한쪽 면을 무반사 코팅했으며, 얻어진 광펄스의 폭(FWHM)은 22psec였다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.524-526
• /
• 1999

It is observed that the mode spacing of an cxternal cavity semiconducror laser can be altered dramatically by the insertion of an intracavity etalon. 111e mode spacing is decreased as a function of etalon's reflectivity and this effect is quantitatively explained by an analysis of resonant modes. We abo show that this effect provides a precise and convenient alternative for determining the coating reflectivity of a high reflectivity etalon. talon.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.9-18
• /
• 2003

Two configurations of Film Bulk Acoustic Wave Resonators with acoustic quater-wave bragg reflector layers are theoretically analyzed using equivalent circuits and the difference of their characteristics are discussed. We compare the characteristics of λ/2 mode to those of ideal FBAR with top and bottom electrode contacting air and the characteristics of λ/4 mode to those of ideal FBAR with top electrode contacting air and bottom electrode clamped. We assume that the piezoelectric film is ZnO, the electrode is A1 and the substrate is Si, ABCD parameters are extracted and input impedance is calculated by converting the equivalent circuit from Mason equivalent circuits to the simplified equivalent circuits that ABCD parameters are extracted possible, From the variation of resonance frequency due to the change of thickness of reflector layers and the variation of electrical Q due to the change of mechanical Q of reflector layers, it is confirmed that the reflector layer just under the bottom electrode have the greatest effect on the varation of resonance frequency and electrical Q. It is shown that the number of reflector layers required for the saturation of electrical Q decreases with the increase of the impedance ratio of reflector layers and electrical Q of λ/2 mode is larger than that of λ/4 mode, Electromechanical coupling factor is independent of the number of layers, The impedance ratio of reflector layers becomes larger as the electromechanical coupling factor becomes larger, The electromechanical coupling factor of the two mode are smaller than those of ideal FBARs because of the trapping of acoustic energy in the reflector layers, The insertion loss of the ladder filter decreases with the increase of the number of reflector layers but the bandwidth is not affected much by the number of reflector layers, As the impedance ratio of reflector layers becomes larger the insertion loss becomes smaller and the bandwidth becomes wider, In our analysis of the two mode, characteristics of λ/2 mode appear to be slightly more favorable than that of λ/4 mode

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.232-233
• /
• 2000

반사형 액정표시소자는 저전력 휴대용 표시장치 시장이 급격하게 성장함에 따라 큰 주목을 받고 있다. 현재 반사형 액정표시소자는 TN 액정 모드를 기본적으로 사용하고 있다. 본 논문에서는 편광판을 한 장 사용하여 빛의 흡수를 줄여 밝기를 높일수 있고, 광대역 λ/4 film을 사용하여 명암 대비를 높일 수 있는 단일 편광판 모드 반사형 TN LCD를 설계하고 제작하였다. (중략)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.28-31
• /
• 2018

This paper investigates the ground reflection effect on the channel capacity of an orbital angular momentum (OAM) multi-mode transmission system that uses uniform circular array (UCA) antennas. The ground-reflected signals cause inter-mode interferences between the OAM modes, and lead to system performance degradation. The OAM multi-mode channel capacity severely degrades owing to the ground reflection as the transmission distance increases. Increasing the UCA height above the ground and using highly directive array elements can mitigate the ground reflection effect and increase the channel capacity.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.109-113
• /
• 2015

This paper presents the study results on a dual band feed horn for the focused reflector. A coaxial waveguide structure is attractive to avoid blockage from the feeder. The inner conductor as a hollow waveguide is designed to excite TE11 of a circular waveguide for high frequency. For low frequency, the design of the outer coaxial waveguide that propagates coaxial TE11 and prevents fundamental TEM is presented. The horn size for generation of these modes results in the degradation of performance. The return loss is improved by a capacitive iris and an inductive iris The enhanced pattern symmetry by dual mode is presented. The horn design in this paper are verified through the test.