• Journal of The Korean Association For Science Education
• /
• v.31 no.1
• /
• pp.115-127
• /
• 2011

Analysis frame for undergraduate physics laboratory reports in collecting, processing, and analyzing data was developed. Using the frame and questionaries, we analyzed what difficulties students have in the concepts of error and uncertainty in writing laboratory reports. Students considered repetitive measurement for collecting data, but they didn't express it distinctly in their reports. They also had difficulties in measuring data around the extreme value or the large slope. Especially, most students have had difficulties with error and uncertainty. They can't apply the basic formulation to propagation of error and uncertainty. They also had the difficulties in analyzing data with concepts of error and uncertainty. While most students responded that error and uncertainty is important, there were few students who analyzed the influence of the cause of error on the results quantitatively. The result of the study showed that students have difficulties in writing the laboratory reports because they didn't have the correct concept of the error and uncertainty. So, it is needed to not only teach the physics concept about experiment but to teach basic concept of data collecting, processing, and analyzing specially about error and uncertainty for students as well.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.838-848
• /
• 2014

We present a simulation study of an algorithm for the range and angle of arrival(AOA) estimation with an interferometric synthetic aperture radar(InSAR) altimeter using a real digital elevation model(DEM). We also illustrate a step-by-step procedure of generating raw InSAR data, as well as their range and azimuth compressed data, which is to be used for the subsequent altitude and angle estimation. The AOA is estimated using a deterministic maximum likelihood estimator(DMLE) applied to the first arrived point for each pulse in the compressed data obtained with three antennas. The range bin size and the pulse repetition interval(PRI) are much smaller than the cell size of the DEM used in this study. To make the DEM compatible to the radar parameters, we first generate a higher resolution DEM by linearly interpolating the given DEM. After a brief description of the principle of the InSAR altimeter, the algorithms for altitude and angle estimation are presented, and their performance is assessed through simulation.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.42.1-42.1
• /
• 2009

한국천문연구원은 우주측지용 레이저 추적 시스템 개발 사업 중 현재 이동형 시스템(ARGO-M) 1기를 개발 중에 있으며, 2009년 5월에 시스템 개념 설계 검토(SDR) 회의를 수행하였고 현재는 예비 설계 단계를 진행 중이다. ARGO-M을 구성하는 5개의 서브시스템 중 하나인 운영시스템은 레이저 관측에 필요한 각종 서브시스템을 제어하고 환경을 종합 판단 후 이를 관측에 반영하며, 실제 관측을 통해 획득한 데이터를 통합 처리 및 전송하는 역할을 담당하고 있다. 현재 본격적인 예비 설계 수행 단계에 있는 운영시스템은 우선적으로 핵심이 되는 소프트웨어의 설계를 위해 오스트리아의 Graz에 위치한 IWF(Institut fur Weltraumforschung) 소속 SLR(Satellite Laser Ranging) 관측소를 2009년도에 방문하여 운영 전반에 관련한 소프트웨어의 로직분석 작업을 수행하였다. Graz 운영시스템 중 소프트웨어관련 시스템은 크게 KHz급 반복율을 가진 레이저를 사용하여 위성까지의 거리 측정에 해당되는 실시간 시스템과 실시간 측정을 통해 저장된 관측 원시 자료를 이후 분석을 수행하는 비 실시간(Non-real time) 시스템으로 나눌 수 있다. 이 중에서 비 실시간 시스템은 원시 자료 분석을 통해 시간 및 거리 바이어스 적용, 노이즈 제거 등의 후처리 과정과 다양한 통계 분석 그리고 SLR시스템의 최종 산출물인 정규점(Normal Point) 생성 등을 수행한다. 이번 소프트웨어 분석 연구를 통해 얻어진 주요 알고리즘과 다양한 다이어그램을 포함한 결과물은 ARGO-M 운영시스템에 최적화하도록 소프트웨어 재구성 및 개발에 반영할 예정이다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.1
• /
• pp.8-13
• /
• 2016

Purpose: The aim of this study was to compare the accuracy of two different styles of mechanical implant torque wrenches before and after sterilization and repeated use. Materials and methods: Thirty new spring-style and friction-style mechanical implant torque wrenches from five different manufacturers were selected as subjects of study and assessed in terms of accuracy. Three manufacturers produced, spring-style (Dio, Neobiotech, Osstem) torque wrenches, and other three manufactures produced friction-style (Dentium, Osstem, Shinhung) torque wrenches. The procedure of target torque measurement was performed 10 times for each device and a digital torque gauge (MGT-12, Mark-10 Corp, USA) was used to record the measurements. All torque wrenches were used repeatedly for 20 times and then sterilized. This whole procedure was repeated 100 times and all torque wrenches were retested. The collected data was analyzed using a SPSS Statistics Analysis program to evaluate the accuracy of the torque wrenches and Mann-Whitney-U test was used for a comparative analysis. Results: After sterilization and repeated use procedure, results did not show any significant difference between error values in the spring-style torque wrench group. However, the results demonstrated an increase in error values within the friction-style torque wrench group (P<.05). Conclusion: There was no difference between the accuracy of new spring-style torque wrenches before and after 100 cycles of sterilization and repeated use (P>.05). There was significant difference between the accuracy of new friction-style torque wrenches before and after 100 cycles of sterilization and repeated use (P<.05). Within the limitation of this study, spring-style torque wrenches were more accurate than friction-style torque wrenches in delivering target torque values.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.54-65
• /
• 2020

This randomized pre-post-controlled experimental study determined the effect on patients' anxiety, stress, systolic blood pressure, heart rate and Bis index when the Healing Beats program is applied after epidural blockage. The subjects were selected from the patients who visited the Department of Anesthesiology and Pain for the treatment of epidural blockage and volunteered through the recruitment announcement. A total of 74 sets of data were collected and analyzed with 25 subjects in the experimental group, 24 in the placebo group, and 25 in the control group. The data was analyzed using descriptive statistics, x2-tests, F-tests and repeated measures of ANOVA. As a result of the study, the general characteristics and variables of the experimental group, placebo group, and control group were all the same, and anxiety was measured twice before and after the study. There were significant differences between groups (F=27.175, p<.001), and stress (F=4.78, p<.001), heart rate (F=4.22, p<.001) and the Bis index (F=7.96, p<.001) were analyzed by variance according to population and time. There was a significant difference. However, there was no significant difference in systolic blood pressure (F=1.23, p=.298). In conclusion, the Healing Beats program can be used as an effective and effective intervention for sedation in clinical situations or stressful situations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1616-1621
• /
• 2006

하천 지형은 흐름과 유사거동에 의한 세굴 또는 퇴적에 의하여 끊임없이 변한다. 이 연구에서는 최근 하천지형의 변화가 크게 일어나고 있는 한강 신곡수중보 직하류 우안의 고수부지 형성 이력에 대한 조사 및 분석을 실시하였다. 조사결과, 1981년 이전까지 하중도(제주초도)가 안정된 형태로 존재하였으나, 1980년대 중반을 거치면서 하중도는 소멸되었고 1990년대 중반 이후부터 우안에 비슷한 규모의 고수부지가 생성되었음을 알 수 있었다. 이 고수부지의 형성과정을 평가하면 다음과 같다. 1) 초기단계(흐름 변화에 따른 이동사주의 정지): 1995년 이전까지는 하천 내 자연적/인위적 교란에도 불구하고 이열사주 형태의 이동상이 유지되다가 1995년 이후 1988년 준공된 신곡수중보의 직.간접적인 영향을 받는다. 이로 인한 하중도의 소멸이 가중되면서부터 신곡수중보 직하류 우안의 이동사주가 정지하기에 이른다. 2) 성장단계(조석에 따른 부유사 반복 퇴적): 이동상 사주가 정지된 뒤 매일 2회씩 반복되는 조석의 영향을 받은 고농도의 부유사가 정지된 사주 위에 반복되어 퇴적되는 양상이 일어난다. 3) 정착단계(정지사주의 고수부지화): 정지사주에서 부유사가 퇴적하고 갈대와 같은 초본류 식생이 활착하게 되면서 부유사 퇴적은 가중되어 간다. 이러한 과정에서 1999년과 같은 대홍수 때 부유사의 고수부지 내 퇴적이 결정적이었을 것이다. 4) 확장단계(고수부지 확장단계): 대홍수 때 고수부지의 퇴적과 아울러 산재하던 버드나무가 교란을 받아 고수부지에서 새로운 버드나무 군락의 터전을 이루어 밀생하게 된다. 향후 고수부지가 잠기는 규모의 홍수가 빈발할 경우 퇴적층의 유실보다는 부유사 퇴적이 많아져 고수부지는 확장단계에 접어들게 된다.70{\sim}90$ 시간 동안 실험을 수행하였다. 세굴의 측정은 투명한 아크릴로 제작된 수제 내부에 CC카메라를 수제 전 후면 및 측면에 설치하여 월류수제의 세굴 발생을 실시간으로 측정하며 동시에 수제의 각 면에 각각 3개의 압력센서를 설치하여 압력분포를 측정함으로써, 월류수제 주변의 압력변화에 따른 세굴심의 실시간 변화를 비교할 수 있도록 하였다. 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을

• Korean Journal of Social Welfare Studies
• /
• v.49 no.1
• /
• pp.5-28
• /
• 2018

Smoking is one of the important public health concerns because it is preventable causes regarding individuals' negative health consequences and increased social and economic cost. However, few studies have examined longitudinal patterns of stages of changes(SOC) in smoking behaviors among the general population. The purpose of the study is to explore the latent patterns of SOC over time among Korean adult smokers using the 2008-2016 Korea Welfare Panel Study. A repeated measure latent class analysis is employed in the present study. The finding of the present study are as follows: First, four latent groups were identified: (1) action/maintenance stage(33.6%), (2) contemplation/preparation to action/maintenance stage(14.8%), (3) continuously contemplation/preparation stage(29.6%), and (4) continuously pre-contemplation stage(22.1%). Second, the results of a multinomial logistic regression found that socio-demographic and clinical characteristics were associated with the identified longitudinal patterns of smoking behaviors. Compared to a continuously pre-contemplation stage, higher levels of depressive symptoms and drinking behavior were associated with increased odds of being in action/maintenance stage. The findings of the present study highlight that a tailored intervention is needed for individuals with continuously pre-contemplation stage and contemplation stage.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.343-354
• /
• 2003

Simulation studies were carried out to investigate the responses of selection for three carcass traits (longissimus muscle area: EMA, fat thickness: BF, and marbling score: MS) based on either adjusted phenotypes (APH) or estimated breeding values (EBV) in multivariate animal model with different breeding schemes. Selection responses were estimated and compared on six different models with respect to breeding schemes using either carcass measurements or real time ultrasonic (RTU) scans generated by Monte Carlo computer simulation supporting closed breeding population. From the base population with 100 sires and 2000 dams, 20 sires and 1000 dams by each generation were selected by either APH or EBV for 10 generations. Relative economic weights were equal of three traits as EMA(1): BF(－1) : MS(1) for standardized either APH or EBV. For first two models which were similarly designed with current progeny-test program in Korean cattle, three carcass traits with records either only on male progenies (Model 1) or on male and female progenies (Model 2) were used for selecting breeding stocks. Subsequently, generation intervals on males were assumed as 6${\sim}$10 years in these two models. The other two models were designed with tools of selection by RTU rather than carcass measurements with genetic correlations of 0.81${\sim}$0.97 between RTU and corresponding carcass traits in addition to whether with records (Model 4) or without records (Model 3) on female. In these cases, generation intervals on males were assumed as 2${\sim}$4 years. The remaining last two models were designed as similar with Models 3 and 4 except genetic correlations of 0.63${\sim}$0.68 between RTU and corresponding carcass traits with records (Model 6) and without records (Model 5) on females. The results from 10 replicates on each model and selecting methods suggested that responses indirect selection for carcass traits in Model 4 were 1.66${\sim}$2.44 times efficient rather than those in Model 1. Otherwise, in Model 6 with assuming moderate genetic correlations, those efficiencies were 1.18${\sim}$2.08 times with comparing to responses in Model 1. However, selection response for marbling score was the smallest among three carcass traits because of small variation of measurements. From these results, this study suggested that indirect selection using RTU technology for improving high meat qualities in Korean cattle would be valuable with modifying measuring rules of marbling score forward to large variation or modifying relative economic weight for selection.

• Journal of the Korean earth science society
• /
• v.40 no.5
• /
• pp.518-537
• /
• 2019

This study examined the implications of a place-based earth science program integrated with Mathematics. 11 pre-service earth science teachers and 22 middle school students participated in the service education activities of earth science for 30 hours focusing on the measurement of the earth's size through earth science experiments as part of the middle school curriculum. In order to minimize errors that may occur during the earth's size measurement experiments using Eratosthenes's shadows length method of the ancient Greek era, the actual data were collected after triangulation ratios were conducted in the locations of two middle schools: one in remote metropolitan and the other in rural area. The two schools' students shared the final estimate result. Through this process, they learned the mathematical method to express the actual data effectively. Participants, experienced the importance and difficulty of the repetitive and accurate data acquisition process, and also discussed the causes of errors included in the final results. It implies that a Place-Based Earth Science Program activity can contribute to students' increased-understanding of the characteristics of earth science inquiry and to developing their problem solving skills, thinking ability, and communication skills as well, which are commonly emphasized in science and mathematics in the 2015 reunion curriculum. It is expected that a place-based science program can provide a foundation for developing an integrated curriculum of mathematics and science.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.507-528
• /
• 2011

Agricultural workers who mix/loads and spray pesticide in fields expose to pesticide through dermal and inhalation routes. In such situation, exposed amount should be measured quantitatively for reasonable risk assessment. Patch, gloves, socks and mask will be good materials for monitoring for dermal exposure while personal air monitor equipped with solid adsorbent and air pump will be a tool for inhalation exposure. For extrapolation of absorbed amount in dermal exposure matrices and of trapped amount in solid sorbent to total deraml or inhalation exposure, Korean standard body surface area and respiration rate were proposed in substitution of EPA data. Important exposure factors such as clothing and skin penetration ratio of dermal and inhalation exposure were suggested based on Spraying time for exposure monitoring must be long enough that the amount of pesticide to get absorbed/trapped in exposure matrices results in reasonable analytical value. In domestic case for the both of speed sprayer and power spray machine, spraying time of 20~40 minutes (0.1~0.2 ha) will be reasonable per single replicate before extrapolating to 4 hours a day with triplicates experiment.