• Composites Research
• /
• v.35 no.2
• /
• pp.75-79
• /
• 2022

In this study, the effect of mechanical and chemical properties of glass fiber reinforced thermoplastic (GFRTPs) according to the number of recycling was confirmed. The composite materials were manufactured through a hot press compression molding process using an E-glass chopped strand mat and a polypropylene film. Four specimens were named according to the number of recycled test repeat: First manufacture, 1st Recycle, 2nd Recycle, and 3rd Recycle. To investigate the mechanical properties of the prepared specimen, tensile test, flexural test, drop-weight impact test, differential scanning calorimetry (DSC), and field emission electron gun-scanning electron microscope (FE-SEM) was performed. As a result, as the number of recycling steps repeat, the degree of crystallization, tensile strength, elastic modulus, and flexural strength were increased, but the impact properties were greatly reduced.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.4
• /
• pp.5-9
• /
• 2019

This paper is to provide the results of a pilot study of the usability and possibility of impact force response signal induced from impacting an object for the assessment of compressive strength of various materials (rock, concrete, wood, etc.) nondestructively. For this study, a device was devised for impacting an object and measuring the impact force. The impact was carried out by an initial rotating free falling impact and following repetitive impacts from the rebound action which eventually disappears. Wood and rock test specimens for different strengths were tested and an impact force response signal was measured for each test specimen. The total impact force signal energy which is assessed from integrating the impact force response signal was compared with the directly measured compressive strength for each specimen. The comparison showed that the total impact force signal energy has a direct relationship with the directly measured compressive strength and the results clearly indicated that the compressive strength of construction materials can be assessed nondestructively using total impact force signal energy which is assessed from integrating the impact force response signal induced from impacting an object.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.683-684
• /
• 2010

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.352-361
• /
• 2011

The purpose of this study is that incident shock of special guards examines closely impact getting in job stress and coping ability. This study used judgement sampling method after establish special guards who is working at airport of capital region area in 2011 by population, and sample numbers used on interpretation finally were total 239 people. Questionnaire used in this study was consisted of the total 67 question, and executed frequency analysis, Factor analysis, reliability analysis, regression analysis by SPSSWIN 18.0. reliability of questionnaire appeared more than Cronbach's ${\alpha}$ value .779. Conclusion of this study was as following. First, incident shock of special guards affects in job stress. That is, stress about personal relations increases as invasion is often repeated. Also, stress about role increases as hyperarousal is often repeated. Second, incident shock of special guards affects in coping ability. That is, problem central coping ability decreases as hyperarousal is often repeated. On the other hand, problem central coping ability increases as evasion tendency acts continuously. Third, job stress of special guards affects in coping ability. That is, problem central coping ability increases as feeling of helplessness for job characteristic acts. On the other hand, problem central coping ability, social support pursuit ability decreases as ambiguity about role acts high.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.625-632
• /
• 2010

The moduli of concrete has been determined by various testing methods. The impact resonance (IR) method has been shown to be truly a simple nondestructive testing method which produces consistent results. It is possible to determine not only the modulus but also damping ratio from the IR test. However, the values of elastic modulus and damping ratio of concrete from the test is known to be affected by various test conditions including, specimen support condition, impact steel ball size and sampling rate. In this study, the optimum IR test conditions are suggested and validated experimentally. The test results showed that the recommended test conditions yielded a variation of resonant frequency within ${\pm}0.3%$ and damping ratio ${\pm}10.0%$. In addition, the modulus from the IR test was comparable to that from a static test when the effect of strain amplitude was properly taken into account.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.5
• /
• pp.271-281
• /
• 2005

An electromagnetic type shock wave generator suitable for extracorporeal shock wave therapy has been constructed by employing a solenoid coil. The Property of the shock waves produced by the shock wave generator was evaluated using a needle hydrophone. It was shown that, as the capacitor discharging voltage increased from 8 to 18 kV, the Positive Peak Pressure (P+) of the shock wave increased non-linearly from 10 to 77 Wa. In contrast. the negative peak Pressure (f) varied between -3.2 and -6.8 MPa. had its absolute maximum of -6.9 ma at 14 kV The peak amplitudes P+ measured repeatedly under the same voltage setting varied within $5\;\%$ from mean values and this is very small compared to about $50\;\%$ for electrohydraulic type shock wave generators. It could be observed, from the hydrophone signal recorded over 1 ms. several sequential acoustic impulses representing bubble collapses. namely. acoustic cavitation. induced by the shock wave. A technique based on wavelet transformation was used to accurately measure the time delay between the 1st and 2nd collapse known to be closely related to the shock strength. It was observed that the measured time delay increased almost linearly from 120 to $700\;{\mu}s$ with the shock wave Pressure P+ increasing from 10 to 77 MPa.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.224.2-224.2
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.264.1-264
• /
• 2002

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.143.1-143
• /
• 2002

• The Korean Journal of Physiology
• /
• v.9 no.1
• /
• pp.57-61
• /
• 1975

A study was designed to clarify the influence of the hippocampus upon tolerance by electric shock. Forty-eight male rats were used, of which 14 rats had their hippocampal tissue on both sides removed through an opening in the parieto-occipital cortex (hippocampal group), 17 rats received damage to the parieto-occipital cortex only (cortical control group), and 17 rats served as normal control animals. After 24 hours' fasting with water ad libitum, each animal was restrained on a plate with added electric shock (4 mA A.C., 1.5 sec in a duration, and once per minute in average) to the tail for the last 24 hours without food and water. The mortality in each animal group and the mean survival time of the dead animal during the repitition of electric shock were calculated. Results obtained were as follows: 1. The mortality was lower significantly in the hippocampal group than in the two control groups. 2. The mean survival time of the dead animal was longer insignificantly in the hippocampal group than in the two control groups. The inference from the above results is that the hippocampus exerts a inhibitory influence upon tolerance by electric shock.