• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.63-66
• /
• 2015

3차원 영상을 생성하기 위해 스테레오 매칭을 통해 깊이 정보를 획득한다. 이때 발생하는 경계영역과 텍스처가 부족한 부분의 깊이정보 부정확성 문제를 해결하기 위해 영상 분할 기반 스테레오 매칭 방법을 제안한다. 일반적으로 사용하는 윈도우 기반 스테레오 매칭 결과를 기반으로 분할된 영상 내에서 최적의 변위 값을 재 할당함으로서 깊이정보의 정확성을 향상시킬 수 있다. Mean-shift는 참조 영상에서 화소 간 평균값 차이가 최대가 되는 영역들을 반복적으로 찾는다. 유사한 평균값을 갖는 영역들을 기반으로 영상을 분할하는 것을 Mean-shift를 이용한 영상분할 이라고 한다. 분할된 영상은 각 영역을 대표하는 패치 구조를 가지고 있어 참조 영상에 포함되어있는 잡음에 강인한 특성을 지닌다. 스테레오 매칭을 통해 화소별로 변위 값을 할당해주는 대신, 분할된 영상을 이용하여 각 분할 영역에 동일한 변위 값을 할당한다. 분할된 영상에 동일한 변위 정보를 할당할 경우 객체와 배경의 경계영역에서 잘못된 변위 값이 할당되는 경우가 발생한다. 이러한 경계 영역의 변위정보 부정확성을 보완하기 위해 화소의 기울기 항을 비용 값 계산 과정에 추가하여 단점을 보완한다. 최종 비용 값 계산을 통해 획득한 초기 변위 지도에 중간 값 필터를 적용하여 분류된 영역에 동일한 변위 값을 할당한다. 제안한 방법을 적용하여 경계영역의 정확도가 향상된 최종 변위 지도를 획득한다.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.25-31
• /
• 1974

1. Various gluing qualities applying Resorcinol Plyophen #6000 were studied on aiming the strength relationships of laminated woods resulted by single species [poplar (Populus deltoides), larch(Larix leptolepis)], mixed species of (poplar and larch), preservatives, treated poplar the scarf joint with mixed species of poplar and larch and the scarf joint treated with preservatives. 1. 1 On the block shear and on the DVL tension test, the mean wood failure ratio showed an excellent value i.e., above 65% and the tangential strength for larch was higher than that of radial, but it was reversed for poplar as shown in Tables 1 and 2. 1. 2 The lamina treated with Na-PCP reduced slightly the strength but the limited strength allowed for manufacturing laminated wood was not influenced by treating Na-PCP as shown in Tables 3 and 4. 1. 3 The safe scarf ratio in the plane scarf joint was above 1/12 for larch and 1/6 for poplar regard less of the chemical treatment or untreatment as shown in Tables. 5, 6, 7 and 8. 2. In the normal and boiled state, the gluing quality of the laminated wood composed of single[poplar (Populus deltoides), larch (Larix leptolepis)] and double species (poplar and larch) glued with Resorcinol Plyophen #6000 were measured as follow, and also represented the delamination of the same laminated wood. 2.1 The normal block shear strength of the straight and curved laminated wood (in life size) were more than three times of the standards adhesion strength. And, the value of the boiled stock was decreased to one half of the standard shear adhesion strength, but it was more than twice the standard strength for the boiled stock. Thus, it was recognized that the water resistance of the Resorcinol Plyophen #6000 was very high as shown in Tables 9 and 10. 2. 2 The delamination ratio of the straight and curved laminated woods in respect of their composition were decraesed, in turn, in the following order i. e., larch, mixed stock (larch+poplar) and poplar. The maximum value represented by the larch was 3.5% but it was below the limited value as shown in Table 11. 3. The various strengthes i.e., compressive, bending and adhesion obtainted by the straight laminaced wood which were constructed by five plies of single and double species of lamina i. e., larch (Larix leptolepis) and poplar (Populus euramericana), glued with urea resin were shown as follows: 3. 1 If desired a higher strength of architectural laminated wood composed of poplar (P) and larch (L), the combination of the laminas should be arranged as follows, L+P+L+P+L as shown in Table 12. 3.2 The strength of laminated wood composed of laminas which included pith and knots was conside rably decreased than that of clear lamina as shown Table 13. 3.3 The shear strength of the FPL block of the straight laminated wood constructed by the same species which were glued with urea adhesives was more than twice the limited adhesion strength, thus it makes possible to use it for interior constructional stock.

• The KIPS Transactions:PartB
• /
• v.13B no.5 s.108
• /
• pp.547-552
• /
• 2006

There have been various cohesion measurements studied considering reference relation among attributes and methods in a class. Generally, these cohesion measurement are camed out in one class. If the range of reference relation considered are extended from one class to two classes, we could find out the reference relation between two classes. Tn this paper, we proposed a neural network to determine the method location. Neural network is effective to predict output value from input data not to be included in training and generalize after training input and output pattern repeatedly. Learning vector is generated with 30-dimensional input vector and one target binary values of method location in a constraint that there are two classes which have less than or equal to 5 attributes and methods The result of the proposed neural network is about 95% in cross-validation and 88% in testing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.8
• /
• pp.703-710
• /
• 2012

At the stage of conceptual design of a helicopter, it is a general way using low fidelity analysis methods because of a large number of design calculations and trade-off studies. Determination of empirical parameters used in analysis codes for more practical design, depends on an user's design experiences, which effects on the accuracy and the fidelity of conceptual design results. Thus, more precise and logical method should be required to determine the empirical parameters used in the conceptual design of a helicopter. The present method is to be used not only in verifying the empirical parameters generated by design requirements, but also regenerate them if they contain any errors. Empirical parameters produced by present method were used to design a helicopter with a payload objective and performance constraints of an operating helicopter. As a result, weights and geometries of designed helicopter matched the target value within 5% significance level, proving that the suggested parameter generating method can be useful in the conceptual design of a helicopter.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.71-79
• /
• 2021

In the manufacturing industry, there is a transition to multi-item production for reinforcement of competitiveness. Therefore, the hybrid manufacturing technology is increasing. Especially, many efforts in production quality improvement are made through the adoption of the manufacturing execution system and ERP, so it is necessary to operate MES for prompt and effective management. MES should improve ineffective parts in production activities while managing all stages related to production of products. If there is change in the process, the changed items should be reflected to the system. However, most manufacturing execution systems are operated passively and repetitively by system administrators. This study presents a model that system administrators can comprehensively apply reference information about production related requirements on specific line's equipment to the same equipment of other lines. The flexible response for application to production lines is possible thanks to the division of blanket application and selective application of reference information through proposed model.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.84-93
• /
• 2000

The conventional fractal decoding was implemented to IFS(iterated function system) for every range regions But a part of the range regions can be decoded without the iteration and there is a data dependence regions In order to decode $R{\times}R$ range blocks, It needs $2R{\times}2R$ domain blocks This decoding can be analyzed to the dependence graph The vertex of the graph represents the range blocks, and the vertex is classified into the vertex of the range and domain The edge indicates that the vertex is referred to the other vertices The in-degree and the out-degree are defined to the number of the edge that is entered and exited, respectively The proposed method is analyzed by a dependence graph to the fractal code, and the decoding order is recomposed by the information of the out-degree That is, If the out-degree of the vertex is zero, then this vertex can be used to the vertex with data dependence Thus, the proposed method can extend the data dependence regions by the recomposition of the decoding order As a result, the Iterated regions are minimized without loss of the image quality or PSNR(peak signal-to-noise ratio), Therefore, it can be a fast decoding by the reducing to the computational complexity for IFS in the fractal Image decoding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.10
• /
• pp.889-900
• /
• 2012

In wireless sensor networks, the positioning scheme using received signal strength (RSS) has been widely considered. Appropriate estimation of path-loss exponent (PLE) between a sensor node and an anchor node plays a key role in reducing position error in this RSS-based positioning scheme. In the conventional researches, a sensor node directly uses the PLEs measured by its nearest anchor node to calculate its position. However, the actual PLE between a sensor node and the anchor node can be different from the PLE measured by its nearest anchor node. Thus, if a sensor node directly uses the PLEs measured by its nearest anchor node, the estimated position is different from the actual position of the sensor node with a high probability. In this paper, we describe the method how a sensor node estimates PLEs from the anchor nodes of interest by itself and calculates its position based on these self-estimated PLEs. Especially, our proposal suggests the mechanism to iteratively calculate the PLEs depending on the estimated distances between a sensor node and anchor nodes. Based on the recalculated PLEs, the sensor node reproduces its position. Through simulations, we show that our proposed positioning scheme outperforms the traditional scheme in terms of position error.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.105-113
• /
• 2008

In Ubiquitous Society, accurate Location Calculation of user's device is required to achieve the need of users. As the location calculation is processed by ranging between transceivers, if some obstacles exist between transceivers, NLoS(Non-line-of-Sight) components of received signal increase along with the reduction of LoS(Line-of-Sight) components. Therefore the location calculation error will increase due to the NLoS effect. The conventional location calculation algorithm has the original ranging error because there is no transformation of ranging information which degrades the ranging accuracy. The Iterative Calculation method which minimizes the location calculation error relys on accurately identifying NLoS or LoS condition of the tested channel. We employ Kurtosis, Mean Excess Delay and RMS Delay spread of the received signal to identify whether the tested channel is LoS or NLoS firstly. Thereafter, to minimize location calculation error, the proposed Iterative Calculation method iteratively select random range and finds the averaged target location which has high probability. The simulation results confirm the enhancement of the proposed method.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.31-38
• /
• 2005

Conceptual design of an Aerostat was completed. Configuration was determined based on wind tunnel test results of aeostat hulls to have longitudinal static stability. Hull surface area and volume were obtained by using of Cubic spline method for given configuration and length. Final length of a hull was determined by iteration process. Cable tension and payload were estimated for conceptual design. A parametric study was performed for various weight and misson altitude. As results, a 30m class aerostat was designed and described.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.88-98
• /
• 1998

A waveform for shock response spectrum test on a shaker is synthesized using wavelets such that a specified shock response spectrum of a test profile is achieved. The parameters of a wavelet are center frequency, amplitude, number of half cycles, delay and polarity. The amplitude of each wavelet component is iteratively adjusted so a specified shock response spectrum is matched. The waveform so synthesized is regarded as a reference acceleration waveform for a shaker shock response spectrum test. The author proposes the use of a long duration and low peak waveform. The usefulness of this approach is illustrated with some examples.