• Journal of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.244-250
• /
• 2001

One of the reasons for brittle failure in reinforced concrete structures subjected to severe earthquake is due to large slip between reinforcing steel and concrete. This study aims to evaluate effects of deformation patterns of ribbed reinforcing bars on bond under cyclic loading. Bond test specimens were constructed with machined bars to test the newly developed reinforcing bars with high relative rib areas. The degree of confinement is also another key parameter in this bond test. From the test results under monotonic and cyclic loading, bond strength and stiffness were evaluated. Bond strength and bond stiffness increase as relative rib areas under cyclic loading for specimens highly confined by transverse reinforcement. The increase rates of the bond performance under cyclic loading are larger than those of specimens under monotonic loading. The developed bars with high relative rib areas will contribute for better bond performance for reinforced concrete structures subjected to severe seismic loadings.

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.3-7
• /
• 2004

재료에 단순 인장시험에 의해 구한 항복강도의 2/3의 축응력을 부가하면, 소성변형과 파괴는 일어나지 않지만, 상당한 사이클로 반복하여 부가하면, 파괴가 일어난다. 이것을 피로파괴라고 한다 대부분의 구조물이나 기계부품은 재료의 항복응력 이하의 반복하중을 받으면서 작동되므로, 피로파괴가 자주 발생한다.(중략)

• Journal of the KSME
• /
• v.52 no.7
• /
• pp.50-53
• /
• 2012

피로는 하중이 반복됨에 따라 균열이 발생하고 진전하여 마침내 파단에 이르게 되는 현상으로 강 구조물 고장의 원인 중 70% 이상을 차지하고 있다. 이 글에서는 기본적인 피로수명 평가방법에 대하여 살펴보고 이를 바탕으로 용접구조물의 피로안전도를 평가하는 기술에 대하여 정리하여 보았다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.183-189
• /
• 2006

When RC structures are repaired or strengthened using FRP, it is required to cure for some Period under certain air temperature and then it is hopeful to avoid detrimental action caused by external vibration sources during that period. Therefore, an effect of repeated loading during Carbon Fiber Sheet(CFS) strengthening Process on the strengthening efficiency is studied through an experiment for a number of RC beams. Experimental results showed that the curing time of 24 hours without any repeated loading after CFS attachment were recommended for 1 ply strengthening, and 12 hours for 2 plies strengthening.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.131-138
• /
• 2008

Fiber-reinforced polymer (FRP) sheets have been successfully used to retrofit a number of existing concrete buildings and structures because of their excellent properties (high strength, light weight and high durability). Bond characteristics between FRP sheets and concrete should be investigated to ensure an effective retrofitting system. RC structures strengthened with FRP sheets are often subjected to cyclic load (traffic, seismic, temperature, etc.). This research addresses a local bond stress-slip relationship under cyclic loading conditions for the FRP-concrete interface. 18 specimens were prepared with three types of FRP sheets (aramid, carbon, and polyacetal) and two types of sheet layer(one or two). The characteristics of bond stress-slip were verified through experimental results on load-displacement relationship.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.133-140
• /
• 1990

Analysis of cable structures is complex because their force - displacement relationships are highly nonlinear and also because large deformations introduce geometric nonlinearity. Therefore, we must take account their geometric nonlinearity in the analysis and find the equilibrated shape of cable structures. In this paper, to slove these problems, numerical procedures involving geometrical nonlinearity are introduced. They are applicable to general cable net, flexible transmission lines and suspended cable roof. These procedures are divided into two parts; one is to obtain the equilibrated shapes and stresses of the cable structures with uniform load by flexibility iteration method, the other is to analyse the equilibrated structures subjected to nodal external forces by nonlinear finite element method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.83-92
• /
• 1987

Fatigue fracture of reinforced concrete structures are characterized by considerably larger strains and microcracking as compared to fracture of R.C. structures under static loading. The strain of stirrup is increased suddenly by the occuring of inclined crack and the average strain ${\epsilon}_{\omega}$ of all stirrups in a structure at maximum load increase approximately in proportion to log N. The structures critical in longitudinal reinforcement seemed to have an endurance limit of 60~70 percent of static ultimate strengths for 1,000,000 cycles. In this test, the average fatigue strength at 1,000,000 cycles for all structures tested was approximately 65 percent of the static ultimate strength.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.183-193
• /
• 1996

The objective of this study is to investigate the characteristics of elastic and inelastic bekavior of ductile momenting-resisting reinforced concrete frame subjected to reversed lateral loading such as earthquake excitations. For this purpose, a 2-bay 2-story reinforced concrete plane frame with seismic detail was designed and one 1/2.5-scale subassemblage was manufactured according to the required similitude law. Then, the reversed load test under the displacement control was performed statically to this subassemblage. Finally, the results of this test were analysed regarding to (1) the design load vs actual strength, (2) degradation in stiffness and strength. (3) failure mode or energy dissipation. (4) local deformations.

• Journal of the KSME
• /
• v.44 no.6
• /
• pp.53-58
• /
• 2004

일반적으로 사용단계의 구조물은 시간이 경과함에 따라 초기의 설계, 시공상 오류에 의한 초기결함, 반복하중 그리고 취약한 환경 등 외부 조건에 노출될 경우에는 구조물 본연의 성능을 점차 상실하게 되어 심지어는 인명과 재산권을 위협하는 대형 붕괴사고를 일으키기도 한다. 따라서 구조물의 사용성을 적정 수준 이상으로 유지하기 위해서는 정기적인 점검을 통해 잔존수명을 미리 예측하여야 함은 물론, 최적의 보수시기와 보수방법을 알려줄 수 있는 시설물 모니터링시스템이 요구되고 있다. (중략)

• Computational Structural Engineering
• /
• v.6 no.1
• /
• pp.44-49
• /
• 1993

이 글에서는 거시적 모델을 사용하여 전단벽체를 수치모델하는 방법에는 여러가지의 방법이 있으며 각기 그 모델들에는 장점과 단점을 지니고 있음을 보았다. 거시적 모델로 구조물을 해석하는 경우에는 전단벽체의 모델과 그에 맞는 반복이력모델의 선정에 주의하여야 한다. 이는 전단벽체의 파괴양상과 비선형거동 등의 복잡한 거동을 한개의 모델을 가지고 일률적으로 적용하지 못한다는 거시적 모델의 한계점 때문이다. 그러나 아직까지 계산기의 발전과 미시적 모델의 한계점을 고려한다면 구조물 비선형해석시 최선의 선택은 미시적 방법보다는 거시적 방법이라하겠다. 거시적 모델을 사용하여 구조물의 3차원 해석 프로그램을 개발한 예를 보았듯이, 3차원 비선형거동까지 고려한다면 거시적방법이 적당하리라고 판단된다.