• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.413-420
• /
• 2012

An aluminum foil-laminated sheet is a laminated steel sheet on which aluminum foil is adhesively bonded. It is usually used on the outer panel of home appliances to provide an aluminum feeling and appearance on the surface of the product. The delamination of aluminum foil is one of the main problems during the stretch forming process. The purpose of this study is was to determine the delamination limit of an aluminum foil-laminated sheet in the stretch forming process. The delamination was dependent on the bonding strength between aluminum foil and steel sheet. The fracture behavior of the interface between the aluminum foil and the steel sheet was described by a cohesive zone model. A finite element was conducted with the cohesive zone model to analyze the relationship between the delamination limit and the bonding strength of the interface. The interface bonding strength was evaluated by lap shear and T-peel test. The delamination limit of the aluminum foil-laminated sheet was determined by using the bonding strength of the steel sheet. The delamination limit was also verified by the Erichsen test.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.30-31
• /
• 2014

Since consists of regression equation by penetration depth prediction calculated by existing NDRC formula mainly considers properties of projectile, impact velocity, compressive strength as parameter, it is difficult to apply it to fire reinforced concrete. In this study, scabbing limit thickness was predict considering fiber reinforcement effect by local fracture of concrete was evaluated through high-velocity impact test. As a result of applying fracture reduction coefficient to NDRC, it was possible to predict scabbing limit thickness of fiber reinforced concrete similarly with actual measurement.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.526-535
• /
• 1994

For the evaluation of the corrosion behavior of the aluminum cladding in the KMRR(Korea Multipurpose Research Reactor) fuel, a modified Griess correlation was derived by introducing a heat flux factor derived from the comparison of the measured in-reactor corrosion data with the prediction of the Griess correlation. As a design criterion on the corrosion to maintain the KMRR fuel integrity, prevention of the oxide spallation was conservatively selected, which is conservatively assumed to occur when the temperature difference across the oxide layer exceeds 114$^{\circ}C$. A bounding power history of the KMRR fuel was determined by examining all the power histories of the KMRR fuel from cycle 1 to equilibrium cycle, and used to predict the maximum possible corrosion. Results of the corrosion prediction of the KMRR fuel with the bounding power history showed that the maximum local thickness of the oxide layer would be below 50$\mu$m and the design criterion on the oxide spallation would be satisfied with a factor of two margin. Therefore, it can be said that corrosion of the cladding will not impair the integrity of the KMRR fuel. Nevertheless, the applicability of the modified Griess correlation to the KMRR needs to be further verified through the KMRR fuel corrosion surveillance.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.227-235
• /
• 2015

In recent years, owing to the frequent occurrence of natural disasters, the inspection and maintenance of structures have become increasingly important on a national scale. However, because most structural inspections are carried out manually, and due to the lack of objectivity in data acquisition, quantitative data are not always available. As a result, researchers are seeking ways to collect and standardize survey data using terrestrial laser scanning, thereby bypassing the limitations associated with visual investigations. However, field data acquired using a laser scanner have been required to measure changes in structure geometry resulting from passive deterioration. In this study, we demonstrate that it is possible to identify the processes of structural deterioration (e.g., efflorescence, leakage, delamination) using intensity data from terrestrial laser scanning. Additionally, we confirm the viability of automated classification of alteration type and objectification of the polygon area by establishing intensity characteristics. Finally, we show that our method is effective for structural inspection and maintenance.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.691-698
• /
• 2001

Nanocomposites based on epoxy acid nanoclay were prepared employing organically modified mica type silicate (OMTS), diglycidyl ether of bisphenol A (DGEBA) type epoxy. curing agent (dicyandiamide; DICY), and catalyst (benzyl dimethyl amine; BDMA). Both melt mixing and solution mixing were und for the sample preparation and structural developments with curing reaction were analyzed using X-ray diffractometer (XRD) and small angle X-ray scattering (SAXS). Because of the different curing rate between extra-gallery and intra-gallery reactions of epoxy mixtures, only intercalated structure was observed for the sample prepared by melt mixing while fully exfoliated structure was observed for the sample prepared by solution mixing. Mechanical properties of exfoliated epoxy nanocomposite were investigated using a dynamic mechanical analyzer (DMA). The dynamic storage modulus of the nanocomposite in both glass and rubbery plateau regions were increased with increasing OMTS contents, but glass transition temperatures ($T_g$) remained unchanged. Thermal properties of epoxy nanocomposite were investigated using thermogravimetric (TGA) and limit oxygen index (LOI) methods. Thermal decomposition onset points and LOI values were increased with increasing OMTS contents due to barrier effects of OMTS sheets.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.157-167
• /
• 2015

Cement composites subjected to high-velocity projectile shows local failure and it can be suppressed by improvement of flexural toughness with reinforcement of fiber. Therefore, researches on impact resistance performance of cement composites are in progress and a number of types of fiber reinforcement are being developed. Since bonding properties of fiber with matrix, specific surface area and numbers of fiber are different by fiber reinforcement type, mechanical properties of fiber reinforced cement composites and improvement of impact resistance performance need to be considered. In this study, improvement of flexural toughness and failure reduction effect by impact of high-velocity projectile have been evaluated according to fiber type by mixing steel fiber, polyamide, nylon and polyethylene which are have different shape and mechanical properties. As results, flexural toughness was improved by redistribution of stress and crack prevention with bridge effect of reinforced fibers, and scabbing by high-velocity impact was suppressed. Since it is possible to decrease scabbing limit thickness from impact energy, thickness can be thinner when it is applied to protection. Scabbing of steel fiber reinforced cement composites was occurred and it was observed that desquamation of partial fragment was suppressed by adhesion between fiber and matrix. Scabbing by high-velocity impact of synthetic fiber reinforced cement composites was decreased by microcrack, impact wave neutralization and energy dispersion with a large number of fibers.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.352-353
• /
• 2003

Clay 분산 유/무기 나노복합재 제조기술은 실리케이트 층상구조의 점토광물을 나노 스케일의 시트상의 기본 단위로 박리(exfoliation)하여 고분자수지에 분산시킴으로써 범용 고분자의 낮은 기계적 물성의 한계를 엔지니어링 플라스틱 수준으로까지 올리고자 하는 것으로서, 기존의 무기 충진재 및 강화재의 입자크기(〉1 $\mu\textrm{m}$)를 나노 스케일까지 분산시켜 기존 무기물 충진 복합재의 단점을 한층 보완하는 것을 목표로 하고 있어 성능 및 원가 면에서 매우 유리한 방법으로 21세기의 복합재료 생산시장의 판도에 상당한 변화를 가져오게 할 수 있는 핵심기술이라 할 수 있다. (중략)

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.20-24
• /
• 2009

Mobile의 기술발달과 보편화에 따라 소비자들은 Mobil이 자기 개성 표현인 액세서리화되고, 더욱 감성적이고 차별화된 디자인을 요구함에 따라, 기업들은 이런 소비자들의 개성화 감성화의 니즈를 표면처리 디자인 기술로 효율적으로 적용해 소비자의 감성만족을 시키려 하고 있다. 국내외 Mobile 시장에서 Metal Case 외장의 2차원적인 디자인패턴은 다양한 표면처리 가공 접근이 용이하지 못하고, 패턴디자인의 한계에 이르렇다. E/F(INLET)의 도금 가공 기술의 Concept은 "원활한 모재의 제품 박리성" 에 있으나, 역발상으로 "Metal 모재와의 밀착성"으로 제품디자인을 구현하여, 제품의 도금 두께층 및 신뢰성 기술 확보함으로, 표면층에 사진, 그림, 인물 풍경, 자연물이미지 등의 다양한 감성디자인패턴의 구현이 가능해졌다. 산업기술자원부의 디자인혁신센터로 중소기업디자인개발 지원을 위해 설립된 중앙대학교 디자인경영센터와 SR I-TECH의 기술력으로 3차원 감성디자인패턴을 개발하게 되었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.3
• /
• pp.194-205
• /
• 1994

이종재료 접합재의 연구개발(R&D)이나 품질보증(QA)분야에서 최적 접합조건의 신속한 결정과 사용중 접합재의 접합강도에 결정적으로 영향을 미치는 접합계면의 박리 미접합부등의 비파괴진단 평가기법에 적극 활용되고 있는 초음파비파괴평가(UNDE)기법의 주된 특징과 적용한계, 향후 연구되어야할 과제등을 최근의 특징적인 연구경향과 적용예를 중심으로 소개하고자 한다. 본고(本稿)에서 기술하는 초음파비파괴평가기법은 부분적으로는 기술의 안정화단계에 까지 상당히 접근하여, 현재 국내 반도체산업의 품질보증분야에서는 접합재료 접합계면의 비파괴적해석에 그 유용성이 어느정도 확인되고 있으나 정량적비파괴평가(QNDE)와 검사시스템의 꽃이라 불리는 전문가시스템화에의 접근에는 아직 해결되어야할 문제가 많다. 따라서, 저자들은 앞으로 접합재료 접합계면의 비파괴적해석에 관련한 연구사례와 결과를 정량적비파괴평가의 중요성과 방향성에 초점을 두고 본학회지를 통하여 계속 연재할 계획이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.773-776
• /
• 1997

This paper presents an investigation of the energy absorption of composite laminates during ballistic impact. Three components are responsible for the absorption of energy-the tensile failure of fiber, the elastic deformation of the composite, the delamination of composite laminates. The ballistic limit, V/sub 0/, of the laminates is determined using a previous model implemented to determine the energy absorption of the three components listed above. The size of the deformed zone during impact was estimated by an approximate solution for impacts on plates. The carbon/epoxy plates were examined for this research.