• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.45-51
• /
• 1998

Ti-45at%AI-1.6at%Mn 조성을 갖는 금속간화합물의 장시간 및 반복산화 거동을조사하기 위하여 반응소결법 및 플라즈마 아크 용해법으로 제조한 시편에 대하여 80$0^{\circ}C$에서는 반응소결재와 용제재 모두 등온 및 반복산화에 대하여 우수한 저항성을 나타내었다. 90$0^{\circ}C$에서는 반응소결재의 경우에는 등온 및 반복산화에 대하여 우수한 저항성을 보였으며, 중량변화와 산화피막의 박리는 극히 적었다. 이에 비해 용제재의 경우에는 등온 및 반복산화에 의해 중향이 크게 변하였으며 피막의 박리도 극심하였다. 90$0^{\circ}C$에 있어서 두 재료간의 이러한 산화거동 차이는 기지/산화물 계면 부근에 형성된 산화층의 차이에 기인하는 것으로 간주하였다. 반응소결재의 경우에는 계면 부근에 연속적인 AO$_{3}$O$_{3}$층이 형성되며, 이러한 층이 산화에 대한 보호막으로 작용하는데 비하여 용제재에 있어서는 계면 부근에 AO$_{3}$O$_{3}$와 TiO$_{2}$의 혼합층이 형성되었다. 용제재의 반복산화시에 보여진 피막의 박리는 냉각시에 TiO$_{2}$와 기지간의 열팽창계수 차이에 기인하여 발생하는 열응력을 TiO$_{2}$가 견디지 못하고 박리를 초래한 것으로 해석하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.11
• /
• pp.747-754
• /
• 2022

An experimental study was carried out to control a shock-induced boundary layer separation by utilizing the supersonic sweeping jet from the fluidic oscillator. High-speed schlieren, surface flow visualization, wall pressure measurement and precise Pitot tube measurement were applied to observe the influences of the location and the supply pressure of the fluidic oscillator on the characteristics of the oblique-shock-induced boundary layer separation. The characteristics of the separation control by the present supersonic fluidic oscillator was quantitatively analyzed by comparing with a conventional control method utilizing an air-jet vortex generator.

• Proceedings of the Speleological Society Conference
• /
• 1994.11a
• /
• pp.86-87
• /
• 1994

동굴의 파괴현상은 크게 퇴적물공해와 환경공해의 두가지로 대별되는데 그중 퇴적물공해는 파손공해, 녹색공해, 그리고 흑색공해, 박리공해 등의 네가지로 구분된다. 즉 파손공해는 시설작업 또는 관광객들의 출입통로 개척을 위한 개발작업으로 동굴퇴적물들이 파손, 오손되는 경우를 말한다. 그리고 녹색공해는 조도, 온도, 습도와 관련된 하등식물의 공해이고 흑색공해는 탄소분의 공해인 경우도 있고 아니면 균류의 패층작용에 의한 경우도 있다.(중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.8-14
• /
• 2005

Understanding of the flow past a bluff body close to a moving ground is very important in automobile and aeronautical fields because of aerodynamic characteristic and instability induced by unsteady vortex shedding. The passive control method that mounted the vertical and horizontal plates at the lower surface of the cylinder is studied to suppress the unsteady oscillation motion. When the grounds moves, the diminish of the shear layer on the ground promotes the interaction between the lower and the upper separated shear layers of the cylinder, hence vortex shedding occurs at the lower gap height than the stationary ground.

• Journal of Conservation Science
• /
• v.22
• /
• pp.121-134
• /
• 2008

The mechanism of stone exfoliation and its cause in relation to chemical weathering by soluble salt were studied. Chemical, mineralogical and physical analysis was performed in exfoliation samples from stone monuments. The representative salt is gypsum in the exfoliation samples. In order to understand the salt reaction, stone samples(tuff and granite) were treated with two type of the salt, gypsum and sodium sulfate, which have different solubility. The capillary water uptakes are slight increased in impregnated with Na2SO4 and weathering simulation of two rock types. It means that the rock is deteriorated in the near of the surface by $Na_2SO_4$. $CaSO_4{\cdot}2H_2O$ bring out the thicker exfoliation than $Na_2SO_4$ because it is penetrated into the deeper zone and amount of accumulated salt is more abundant in the inner part than in the near of the surface. The exfoliation was formed in the tuff by salt treatment and 30cycle of weathering simulation, but there are not significant symptoms of exfoliation in the granite by same condition. This result was caused by the different capillary water uptakes and porosity of the rocks. In the tuff, salt solutions are penetrated into the inner part due to its high capillary water uptakes and porosity but the granite, which has low value relatively, can be formed thinner exfoliation.

• Journal of the Speleological Society of Korea
• /
• no.89
• /
• pp.37-45
• /
• 2008

If a cave is developed and opened to the public, the pollution in caves is inevitable. This kind of environmental pollution is caused by an environmental pollution system that is formed by the interaction among various pollution factors, not by a single factor. The main causes of the pollution are the development of passage, installation of lamps, tourists, oxidation of fixtures, temperature rise and littering, which in turn causes environmental pollution such as green and black mold growth, vatting, exfoliation and water pollution.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.77-80
• /
• 2012

초음속 흡입구는 설계점에서 안정적으로 작동하지만 설계점 밖에서는 엔진성능이 급격히 감소하거나 층 격파 불안정 문제가 발생할 수 있다. 초음속 흡입구의 일반적인 특성을 파악하기 위해 2단 꺾임각을 갖는 외부 압축식 2차원 흡입구를 설계하고 EDISON_열유체 시스템을 이용하여 최종적으로 설계 마하수 2.5에서 작동하는 형상을 얻었다. 그러나 설계 마하수 이하의 영역에서는 충격파-경계층, 충격파간 상호작용으로 인해 유동에서 박리가 발생하고 최종적으로 흡입구 목을 질식시켜 아임계 상태로 천이된다. 이를 해결하기 위해 유동 제어 방법 중 하나인 bleeding을 이용하여 경계층을 제거하거나 유동의 박리를 방지하여 충격파를 cowl lip 전방에 안정하게 고정시킬 수 있었으며, 결과적으로 목적하였던 마하수 2.0에서 2.5에 이르는 작동 영역에서 강건하게 운용될 수 있는 초음속 흡입구를 설계하였다.

• Journal of Chest Surgery
• /
• v.39 no.12 s.269
• /
• pp.934-938
• /
• 2006

Organ malperfusion may mask the presence of aortic dissection and is one of major cause of death in patient with aortic dissection. Several key mechanism appear to contribute to the development of malperfusion, therefore optimal choosing of treatment is necessary to obtain better result. In cases of extremity malperfusion, open bypass procedures have been used for primary treatment, but noninvasive interventional procedures are also recommended as good alternatives in some cases. Here in, we report a case of successful aortic replacement followed by stent insertion in patient with extremity malperfusion caused by acute aortic dissection.

• Journal of the Korean Geographical Society
• /
• v.41 no.6 s.117
• /
• pp.657-669
• /
• 2006

Rates and processes of bare patch denudation were observed at Janggumokoreum(1,710m) and Minoruem(1,600m) in order to clarify some characteristics of turf exfoliation in the subalpine grassland of Mt. Halla. The bare patches have marginal terrace fronts with a maximum height of 85 cm. The terrace risers usually develop an overhanging edge 2 to 38 cm long that eventually hangs down and protects the riser beneath. The patches are largely covered with angular pebbles and cobbles. The mean rate of riser retreat for the period 2002-2004 is 39.2 mm, equivalent to 19.6 mm/yr. However, there is a disparity of the rate of riser retreat at individual sites. The maximum rate is 131 mm measured at Janggumokoreum patch while the minimum rate is 0 mm at Minoreum patch. The rate of riser retreat also varies with seasons. The thawing season of April exhibits a maximum rate of retreat. The freezing season of October and November and the rainy season of June and July show relatively high rates of retreat. Several Processes such as frost action, aeolian deflation, rainwash, rainsplash and fauna activity cause the denudation of bare patches. In particular, the needle ire action which is combined with rainwash or deflation plays a primary role in turf exfoliation due to the diurnal freeze-thaw cycles occurred over 100 days, melted snow and strong wind in the subalpine zone of Mt. Halla. Rainwash is also an important contributing process in the rainy season because Mt. Halla has the highest precipitation in Korea. By contrast, rainsplash erosion has a minor effect on the bare patch denudation due to the overhanging edge of terrace risers. Recent increase in roe deer appears to be responsible for turf destruction.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.157-167
• /
• 2015

Cement composites subjected to high-velocity projectile shows local failure and it can be suppressed by improvement of flexural toughness with reinforcement of fiber. Therefore, researches on impact resistance performance of cement composites are in progress and a number of types of fiber reinforcement are being developed. Since bonding properties of fiber with matrix, specific surface area and numbers of fiber are different by fiber reinforcement type, mechanical properties of fiber reinforced cement composites and improvement of impact resistance performance need to be considered. In this study, improvement of flexural toughness and failure reduction effect by impact of high-velocity projectile have been evaluated according to fiber type by mixing steel fiber, polyamide, nylon and polyethylene which are have different shape and mechanical properties. As results, flexural toughness was improved by redistribution of stress and crack prevention with bridge effect of reinforced fibers, and scabbing by high-velocity impact was suppressed. Since it is possible to decrease scabbing limit thickness from impact energy, thickness can be thinner when it is applied to protection. Scabbing of steel fiber reinforced cement composites was occurred and it was observed that desquamation of partial fragment was suppressed by adhesion between fiber and matrix. Scabbing by high-velocity impact of synthetic fiber reinforced cement composites was decreased by microcrack, impact wave neutralization and energy dispersion with a large number of fibers.