• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.90-91
• /
• 1996

투과증발은 일반 막공정과 달리 투과물의 상전이와 이로 인한 체류액의 온도강하가 존재하기 때문에 열전달현상을 간과할 수 없다. 즉 막을 통한 열전달이 다른 막공정에 비해 현저하게 차이가 난다는 것이다. 이러한 현상은 모듈의 길이가 짧거나 모듈을 항온조에 담가 수행하는 실험실 규모의 투과증발조업에서는 거의 발견되지 않는다. 그러나 투과증발장치가 커져 모듈의 항온유지가 블가능하고 사용되는 막도 상업화되어 투과속도가 비교적 큰 것을 사용하는 파일롯 규모의 실험에서는 쉽게 나타나는 현상이다. Rautenbach등이 셀룰로오즈 아세테이트 막을 이용한 물의 투과증발 실험에서 막간 온도강하가 5~12 K정도 일어났음을 보고한 바 있었다. 이때 온도강하는 조업조건에 따라 달라졌으며 유속이 낮을 수록 증가함을 보였다. 본 연구에서는 투과증발이 일어나는 모듈내에서 열전달현상을 열공급비를 정의하여 해석하였으며, 상전이 현상이 막분리효율에 끼치는 영향을 설명하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.585-586
• /
• 2015

GIS(Gas Insulated Switchgear) 가스구획은 SF6 가스와 강화 에폭시로 만들어진 스페이서를 통해 절연 성능을 유지하고 있는데, 초기 설치 시 조립 오류로 인한 부유 물질이나 철 파편 등에 의한 절연 파괴 및 GIS의 장시간 운전에 따른 열화에 의한 절연 파괴로 아크 사고가 발생한다. 그러나 GIS는 가스로 밀폐된 타입이므로 열화 현상으로 생성되는 이물질 또는 균열에 의한 내부 절연 파괴 현상(내부 아크)을 정확히 알 수 없을 뿐 아니라 사고 위치를 확인하기 어렵다는 단점을 가지고 있다. 본 연구에서는 수동 광소자 방식을 이용하여 GIS 내부 아크발생 시 정확한 탐지 및 위치 표정이 가능하며, GIS 내부에서 발생되는 아크를 바로 제거하고 반복적인 아크가 발생되지 않도록 보호계전기에 의한 GIS의 재폐로 동작을 차단 할 수 있는 GIS 아크탐지 장치를 소개한다.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2002.11a
• /
• pp.350-362
• /
• 2002

A new architecture called the Storage Area Network(SAN) was developed in response to the requirements of high availability of data, scalable growth and system performance In order to use SAN more efficiently, must SAN operating systems support storage virtualization concepts that allow users to view physical storage devices attached to SAN as a large volume virtually. A logical volume manager Days a key role in storage virtualization it realizes the storage virtualization by mapping logical addresses to physical addresses. In this paper, we design and implement an efficient and flexible mapping method for logical volume manager. The mapping method in this paper supports a snapshot that preserves a volume image at certain time and on-line reorganization to allow users to add or remove storage devices to SAN even while the system is running.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.350-362
• /
• 2002

A new architecture called the Storage Area Network(SAN) was developed in response to the requirements of high availability of data scalable growth, and system performance. In order to use SAN more efficiently, most SAN operating systems support storage virtualization concepts that allow users to view physical storage devices attached to SAN as a large volume virtually. A logical volume manager plays a key role in storage virtualization. It realizes the storage virtualization by mapping logical addresses to physical addresses. In this paper, we design and implement an efficient and flexible mapping method for logical volume manager. The nin method in this paper supports a snapshot that preserves a volume image at certain time and on-line reorganization to allow users to add or remove storage devices to SAN even while the system is running.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.331-337
• /
• 2018

Prosthetic rehabilitation of an edentulous patient who has a maxillary defect is difficult to achieve for many clinicians. The maxillary defect causes leakage of air during pronunciation and compromises denture stability, support and retention by reducing denture-bearing area and breaking peripheral seal. In these patients, the sizes and shapes of defects are very important factors which attribute to prognosis of maxillary obturators. This case report shows the prosthetic rehabilitation of the patient who had maxillectomy on the right maxillary sinus because of squamous cell carcinoma. The patient had a stepwise treatment protocol which started with pre-operative dental examination and followed by surgical, interim and definitive obturation phase. In this case, an acceptable level of retention could be obtained due to well-defined static defects and the preserved premaxillae and the patient was satisfied with the result of the treatment in the aspect of function and esthetics.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.7
• /
• pp.671-676
• /
• 2016

This study is about design for the Rotational Instrument of the Industry factory which is used management safety and maintenance. We developed the multichannel vibration monitering system of the self-diagnosis for middle level CMS(Condition Monitoring System) market, and that system are new features to the expandability and flexibility. Normally one channel is used for treating one signal, but developed instrument can treat four channel with one signal processing card. One rack have redundant power supply and displace and it can check vibration measurement value in field without computer. Bearing fault detection is fundamental of vibration surveillance, but sometimes can not check with vibration velocity and acceleration. So it need the filtering and the amplitude modulation on the acceleration enveloping technology when irregular vibration is happened. We developed the vibration analysis instrument which is applied such technology. And the development prototype shows activated within the vibration error limit.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.229-236
• /
• 2023

Maxillary bone defects may follow surgical treatment of benign and malignant tumors, trauma, and infection. Palatal defects often lead to problems with swallowing and pronunciation from the leakage of air into the nasal cavity and sinus. Obturators have been commonly used to solve these problems, but long-term use of the device may cause irritation of the oral mucosa or damage to the abutment teeth. Utilizing implants in the edentulous area for the fabrication of the obturators has gained attention. This case report describes a patient, who had undergone partial resection of the maxilla due to adenocarcinoma, in need of a new obturator after losing abutment teeth after long-term use of the previous obturator. Implants were placed in strategic locations, and an implant-retained maxillary obturator was fabricated, showing satisfactory results in the rehabilitation of multiple aspects, including palatal defect, masticatory function, swallowing, pronunciation, and aesthetics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.30-34
• /
• 2020

Maxillectomy is performed to remove the tumor in the palate, maxillary sinus, buccal mucosa or nasal cavity. The resection range depends on the size and the extent of the tumor and it affects speech production or cause nasal regurgitation during feeding. Obturator can occlude an opening such as an oro-nasal fistula and protect the defect area. Successful reconstrucion of the patient's oral cavity who have gone over the maxillectomy is a difficult task. The condition and number of teeth, the remaining support area, and the extent of the defect area have a great influence on manufacturing the obturator. If these factors are disadvantageous, the prognosis of the prosthesis is uncertain. The final obturator must have a sufficient retention in the patient's oral cavity and must not irritate the surrounding tissue and support area where the resection was performed.In this case, a 55 year old female went through the maxillectomy and the only 3 teeth remained. And the retention of the maxillary prosthesis seems to be poor. So that, we fabricated the closed hollow obturator which has reduced weight compared to the conventional obturator. Consequently the closed hollow obturator can give better sealing and the adaptation.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.259-262
• /
• 2009

Surgery on the distal trachea or the carina presents special problems for maintaining the airway and systemic oxygenation. Cardiopulmonary bypass is an alternative method for respiratory support for the patients with these conditions. Percutaneous cardiopulmonary support (PCPS) applied under local anesthesia has recently been used for respiratory support in tracheal surgery and the outcome is satisfactory. We encountered a patient who had severe distal tracheal stenosis after prolonged intubation. We had a gratifying result with performing tracheal resection and repair under the support of PCPS.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.637-647
• /
• 1997

As stated in Part(I), the use of the isolator is meant to protect a structure from seismic risk, by concentrating the inelastic deformations to relatively cheap and replaceable devices while the rest of the structures remains elastic. This research has been carried out to investigate the effects of various structural parameters and isolator characteristics on the seismic response of Base Isolated Bridges. Simplified analysis method for practical design is developed by using the results. The Proposed Code-Type approach method can be used to estimate the inertial forces accurately, not only at the isolator but throughout the height of the Base-Isolated Bridges. The proposed method is recommended to use in preliminary design tool or even a final design tool for Base Isolated Bridges. For the validation of simplified design method, examples with artificial earthquake time history and design response spectrum for P.C Box Bridge with bilinear hysteretic steel damper are evaluated.