• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.941-948
• /
• 2022

Disaster response robots are deployed to disaster sites where human access is difficult and dangerous. The disaster response robots explore the disaster sites prevent a structural collapse and perform lifesaving to minimize damage. It is difficult to operate robots in the disaster sites due to rough terrains where various obstacles are scattered, communication failures and invisible environments. In this paper, we developed a series connectable wheeled robot module. The series connectable wheeled robot module was developed into two types: an active driven robot module and a passive driven robot module. A wheeled robot was built by connecting the two active type robot modules and one passive type robot module. Two robot modules were connected by one DoF rotating joint, allowing the wheeled robot to avoid obstructions in a vertical direction. The wheeled robot performed driving and obstacle avoidance using only pressure sensors, which allows the wheeled robot operate in the invisible environment. An obstacle avoidance experiment was conducted to evaluate the performance of the wheeled robot consisting of two active driven wheeled robot modules and one passive driven wheeled robot module. The wheeled robot successfully avoided step-shaped obstacles with a maximum height of 80 mm in a time of 24.5 seconds using only a pressure sensors, which confirms that the wheeled robot possible to perform the driving and the obstacle avoidance in invisible environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1718-1726
• /
• 2006

In this paper, we proposed a fuzzy controller and algorithm for efficiently obstacle avoidance in unknown space. The ultrasonic sensor is used for position and distance recognition of obstacle, and fuzzy controller is used for left and right wheels angular velocity control. The fuzzification is used singleton method and the control rule is each wheel forty-nine. The fuzzy inference is used simplified Mamdani's reasoning and defuzzification is used SCOG(Simplified Center Of Gravity). The computer simulation based on mobile robot modelling was performed for the capacity of fuzzy controller and the really applicable possibility revaluation of the proposed avoidance algorithm and fuzzy controller. As a result, mobile robot was exactly reached in target and it avoided obstacle efficiently.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.1-7
• /
• 2011

This paper presents implementation and control of a two wheeled mobile robot system which consists of two systems, an inverted pendulum system and a mobile robot system. Control purpose is to regulate its balancing and navigation. The balancing robot has advantages of one point turning and robust balancing against disturbances from the ground. Simulation studies of local and global control methods are performed. Since the robot is implemented to have a symmetrical structure, simple linear control algorithms are used for balancing and navigation. Low cost sensors such as gyro and tilt sensor are fused together to detect the inclined angle. Experimental studies of following desired circular trajectory are conducted.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.587-593
• /
• 2017

In this paper, we propose a method to solve the difficulties in constructing an environment capable of practical training on the theoretical contents of robot control field. We make a two-wheeled mobile robot with Segway structure using LEGO block. In order to demonstrate the validity of using the developed robot as a practical application of advanced control theory of robotics education such as dynamic system and nonlinear system, the robot takes a stable posture while balancing the change of gravity during running. The results of the experiment are shown. By presenting the results, the robots made using the LEGO block are used for practical training of advanced control theory of robotics. It can be used as a tool.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.210-217
• /
• 2014

This paper presents experimental studies on controlling one-wheel robot, GYROBO. The previous one has the problem of falling down because the inside gimbal leans against one direction to make it balancing. This structural problem has been solved by redesigning the system. Gains obtained through experimental tasks are used as a gain scheduling method so that GYROBO is more stabilized. A line trajectory following control task is performed to test the driving control as well.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.127-132
• /
• 1998

Mobile wheeled robots are nonholonomically constrained systems. Generally, it is very difficult to describe the motion of mechanical systems with nonintegrable nonholonomic constraints. An objective of this study is to describe the motion of a robot with a free wheel. The motion of holonomically and/or nonholonomically constrained system can be simply determined by Generalized Inverse Method presented by Udwadia and Kalaba in 1992. Using the method, we describe the exact motion of the robot and determine the constraint force exerted on the robot for satisfying constraints imposed on it. The application illustrates the ease with which the Generalized Inverse Method can be utilized for the purpose of control of nonlinear system without depending on any linearization, maintaining precision tracking motion and explicit determination of control forces of nonholonomically constrained system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.908-911
• /
• 2014

본 논문은 진공을 이용한 흡착방식과 바퀴형 이동방식을 이용하고 환경 탐지용 센서를 부착한 벽면 이동형 로봇의 물리적 해석을 통한 이동 성능 개선에 관한 연구로서, 대형 구조물의 안전 검사 및 위험한 시설물의 보수 작업 등을 보조하기 위한 목적이 있다. 로봇의 무게에 따른 중력을 견딜 수 있는 강력한 진공흡착방식과 고성능 모터제어에 의한 바퀴 이동방식을 혼합하고 효율적으로 평형을 유지 또는 제어하기 위하여 로봇에 미치는 다양한 힘과 모멘트를 분석하고 수식화 하였으며 기존의 수직이동 속도를 개선하기 위한 로봇의 물리적 변수를 추출하여 변수와 이동력간의 관계를 고찰하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.495-496
• /
• 2009

일반적으로 사용되고 있는 전동휠체어의 4바퀴 굴림 구조는 중증 장애인이나 노약자가 이동이 제한적이고, 전복 위험 등이 산재한다. 이러한 부분에서 오는 단점과 안전성의 문제를 해결하기 위해서 본 논문에서는 자유로운 동선이 가능하게 하고 센서를 적용하여 안전성을 확보하는데 목적을 두고 있다. 다양한 동선을 가지기 위해서 일반적인 바퀴가 아닌 "메카넘휠"을 장착하여 사용한다. 또 제어 방식에 있어서 핸들이라는 하나의 제어 장치 뿐만 아니라 심지어 게임기의 콘트롤러까지 다양한 범위를 수용하기 위해서 하드웨어 적인 확장이 용이한 환경을 사용한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.05a
• /
• pp.551-554
• /
• 2020

본 논문은 주행 로봇의 h/w에 관련된 연구로서, 기존의 험난한 지형을 극복하기 위해 1-자유도 반의 4-bar linkage 구조인 deformation wheel로 로봇 자체 지능을 통해 바퀴 변형을 수행한다. 바퀴변형을 통해 평지뿐만 아니라 비평지 지형도 극복하는 로봇을 제시한다. 또한, 로봇 몸체 중간에 관절로 다이나믹셀을 삽입해 deformation wheel로 극복하지 못하는 장애물을 관절이 로봇 body를 들어 올려줘서 장애물의 키기에 대한 관절의 각도 조절 방법에 대해 제시한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.80-85
• /
• 2011

This paper presents the design of the power-assisted controller for the in-wheel type smart wheelchair by using torque estimation that is predicted by relationship between input voltage and output wheel angular velocity. Nowadays, interest of the moving assistant aids is increased according to the increase in population of the elderly and the handicapped person. However some of the moving assistant aids have problems. For example, manual wheelchair has difficulty moving at the slope, because users lack the muscular strength of their arm. In electric wheelchair case, users should be weak by being decreased muscles of upper body. To overcome these problems, power-assisted electric wheelchair are proposed. Most of the power-assisted electric wheelchair have the special rims that can measure the user's power. In here, the rims have to be designed to install the sensors to measure user's power. In this paper, we don't design the rim to measure the man power. To predict the man power, we propose a control algorithm of the in-wheeled electric wheelchair by using torque estimation from the wheel. First, we measure the wheel velocity and voltage at the in-wheel electric wheelchair. And then we extract driving will forces by using proposed mathematical model. Also they are applied at the controller as the control input, we verify to be able to control in-wheel type smart wheelchair by using simulation.