• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.58-65
• /
• 2017

Fluidized bed gasification is technically and economically proven technology, which shows the high possibility of realization and commercialization. However, in Korea, development of FBG to the commercial scale for power generation and industry is mainly blocked by the fact that there is no experience of design, troubleshooting and operation of even pilot scale fluidized bed gasifier. In this study, a $3MW_{th}$ circulating fluidized bed(CFB) was newly developed for biomass gasification. The fluidized bed was mainly composed of circulating and bubbling fluidized reactors integrating in-situ tar removal step in the system. For cleaning of the tar and acid gas in the product gas, the sequential gas cleaning process comprised of a ceramic filter, rapid quencher and wet scrubber was adopted. Effect of equivalence ratio was investigated to find the optimal operating conditions for the $3MW_{th}$ integrated system of fluidized bed gasification.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.184-184
• /
• 2016

대기압 플라즈마를 이용한 폴리머 합성은 기존의 합성방법에 비해 간단하고 쉽게 폴리머를 합성할 수 있다는 장점이 있다. 대부분의 폴리머는 합성온도가 $150^{\circ}C$ 이하이기 때문에 각 폴리머에 적합한 온도를 제어하는 것이 핵심이라 할 수 있다. 본 연구에서는 폴리머 합성온도를 제어하기 위하여 플라즈마 방전전극에 모노머를 직접 주입하지 않고 간접적인 방법을 선택했다. 그리고 모노머는 액체 공급 장치를 이용해 플라즈마의 가스량과 파워를 제어하면서 폴리머를 합성의 조건을 찾았다. AC 플라즈마를 이용해 methyl methacrylate($C_5H_8O_2$) 모노머를 폴리머로 합성했으며, 그 결과는 FTIR, XRD 등으로 분석하고 특성을 평가했다. FTIR의 결과, C-O, C-H, C=O 등의 전형적인 poly methyl methacrylate(PMMA)의 피크를 확인할 수 있었다. 그리고 XRD의 관찰결과 C1s 및 O1s의 각 binding energy가 각각 283, 285, 288 eV 및 533 eV 주변에서 확인되었다. 그리고 합성시간에 따라 폴리머의 두께가 비례해서 증가하는 것을 관찰할 수 있었다. 실험결과, AC 플라즈마를 이용한 폴리머합성은 가능한 것으로 확인되었으며 소형화 및 휴대가 가능하기 때문에 식품, 바이오, 의약품, 의료용품 등의 현장포장 등 여러 가지 용도로 활용이 가능할 것으로 판단된다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.6
• /
• pp.586-593
• /
• 2014

Limited sources of fossil fuels and also global climate changes caused by $CO_2$ emissions are currently discussed around the world. As a renewable, carbon neutral and widely available energy source, biogas is regarded as a promising alternative to fossil fuels. In this study, a plasma dump reformer was proposed to produce $H_2$-rich synthesis gas by a model biogas. The three-phase gliding arc plasma and dump combustor were combined. Screening studies were carried out with the parameter of a dump injector flow rate, water feeding flow rate, air ratio, biogas component ratio and input power. As the results, methane conversion rate, carbon dioxide conversion rate, hydrogen selectivity, carbon monoxide yield at the optimum conditions were achieved to 98%, 69%, 42%, 24.7%, respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.307-310
• /
• 2010

The research for production of jet fuel from petroleum displacement resources such as bio-mass, coal, natural gas mainly consists of three sub-research areas; the fisrt step is the pretreatment for producing a synthetic gas, and the next step is the Fischer-Trophsh reaction process for making hydrocarbons. The last is the upgrading technology for the hydrocarbons to fit a jet fuel specification via cracking and isomerization reactions. This talk presents reaserch trends and main technologies for production of jet fuel derived from petroleum displacement resources.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.3
• /
• pp.236-242
• /
• 2012

This study has been carried out the experiment for the possibility of biogas reforming using waste heat. The source of this waste heat is the exhaust gas from a small-sized gas engine generator. For recovering the waste heat, Two-stage heat exchanger is manufactured. The two-stage heat exchanger is composed of a heat exchanger for the exhaust gas and a heat exchanger for the water. This two-stage heat exchanger is used for reforming the biogas by means of on-site hydrogen production at the small-sized gas engine generator. The two-stage heat exchanger is coupled with the biogas reformer which is a kind of catalytic reformer. To confirm a heat recovery efficiency of the two-stage heat exchanger, temperature differences of inlet and outlet locations are measured. Also, the variations of syngas concentrations with various biogas flow rates are investigated. As a result using manufactured two-stage heat exchanger, the biogas can be reformed from waste heat recovery. This experiment suggests that the exhaust gas heat exchanger is available for reforming the biogas.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.565-565
• /
• 2012

그래핀(Graphene) 기반의 전계효과 트랜지스터(Field effect transistor) 응용에 있어, 가장 핵심적인 도전과제중 하나는 에너지 밴드갭(Energy bandgap)을 갖는 그래핀 채널의 제작이다. 그래핀은 에너지 밴드갭이 존재하지 않는 반금속(semi metal)의 특성을 지니고 있어, 그 본래의 물리적 특성을 지니고서는 소자구현에 어려움이 있다. 그러나 폭이 수~수십 나노미터인 그래핀 나노리본(Graphene nanoribbon)의 경우 양자구속효과(Quantum confinement effect)에 의하여 에너지 밴드갭이 형성되며, 갭의 크기는 리본의 폭에 반비례한다는 연구결과가 보고된 바 있다. 이러한 이유에서, 효과적이며 실현가능한 그래핀 나노리본의 제작은 필수적이다. 본 연구에서는 은 나노 와이어(Ag nanowire)를 기반으로 한 그래핀 나노리본의 합성을 연구하였다. 은 나노와이어를 열화학 기상증착법(Thermal chemical vapor deposition)을 이용, 아세틸렌(Acetylene, C2H2) 가스를 탄소공급원으로 하여 그래핀을 나노와이어 표면에 합성하였다. 합성과정에서 구조에 영향을 미치는 요인인 합성온도와 가스의 비율, 압력 등을 조절하여 최적화된 합성조건을 확립하였다. 합성된 나노리본의 특성을 라만분광법(Raman spectroscopy)과 주사전자 현미경(Scanning electron microscopy), 투과전자현미경(Transmission electron microscopy), 원자힘 현미경(Atomic force microscopy)를 통하여 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.804-815
• /
• 2019

Due to the depletion and environmental problems of fossil fuel, biomass has arisen as an alternative energy source. Biomass is a renewable and carbon-neutral source. However, it is moister and has lower energy density. Therefore, biomass needs thermal chemical conversion processes like gasification, and it does not only produce a flammable gas, called 'syngas', which consists of CO, H2, and CH4, but also some unwanted byproducts such as tars and some particulates. These contaminants are condensed and foul in pipelines, combustion chamber and turbine, causing a deterioration in efficiency. Thus this work attempted to find a method to remove tars and particles from syngas with a filter which adopts a pre-coating technology for preventing blockage of the filter medium. Hydrated limestone powder and activated carbon(wood char) powder were used as the pre-coat materials. The removal efficiency of the tars was 86 % and 80 % with activated carbon(wood char) coating and hydrated limestone coating, respectively.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.125-131
• /
• 2006

Dimethyl ether (DME) is a new clean fuel as an environmentally-benign energy resource. DME can be manufactured from various energy sources including natural gas, coal, biomass and spent plastic. In addition to its environmentally friendly properties, DME has similar characteristics to those of LPG. Therefore, it is considered as an excellent substitute fuel for LPG, fuel cells, power plant, and especially diesel and is expected to be the alternative fuel by 2010. The experimental study of the direct synthesis of DME was investigated under various conditions over a temperature range of $220{\sim}280^{\circ}C$, syngas ratio 1.2~3.0. All experiments were carried out with a hybrid catalyst, composed of a methanol synthesis catalyst ($Cu/ZnO/Al_2O_3$) and a dehydration catalyst (${\gamma}-Al_2O_3$). The observed reaction rate follows qualitatively a Langmiur-Hinshellwood model as the reaction mechanism. Such a mechanism is considered with three reactions; methanol synthesis, methanol dehydration and water gas shift reaction. From a surface reaction with dissociative adsorption of hydrogen, methanol, and water, individual reaction rate was determined.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.5
• /
• pp.554-561
• /
• 2016

Depending on the Bio-gas sources, main component gases of $CH_4$ and $CO_2$ are shown to be variously present in amounts. For the anaerobic digester, The concentration of $CH_4$ and $CO_2$ in the gases are 60~70 and 30~35 vol%. For the landfill gas, $CH_4$ and $CO_2$ are 40~60 and 40~60 vol%. For the food wastes, $CH_4$ and $CO_2$ are 60~80 and 20~40 vol%, respectively. In this study, maximum conversion rates of $CO_2$ were obtained from the variety of concentrations of $CH_4$ and $CO_2$ by the catalysts of reforming reactions. Moreover, in order to get maximum producing amount of synthetic gas, experimental studies were performed to optimize the reaction variables. On the basis of $CH_4$, 243 ml, R [$CH_4/(O2+CO_2)$] value were varied from 0.8 to 1.35, in the study of $CH_4$ and $CO_2$ reforming reactions. It was shown that the optimal results were obtained for 1.35 of R value. And also, at $850^{\circ}C$ and 1 atm, the production rate of synthetic gas was 90% and the conversion rates of $CH_4$ and $CO_2$ were higher than 99% and 90%, respectively.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.3
• /
• pp.75-80
• /
• 2012

Gasification is a therm-chemical conversion process to convert various solid fuels into gaseous fuels under limited supply of oxygen in high temperature environment. Considering current availability of biomass resources in this country, the gasification is more attractive than any other technologies in that the process can accept various combustible solid fuels including plastic wastes. Mixed fuels of biomass and polyethylene pellets were used in gasification experiments in this study in order to assess their potential for synthesis gas production. The results showed that higher reaction temperatures were observed in mixed fuel compared to woodchip experiments. In addition, carbon monoxide, hydrogen, and methane concentrations were increased in the synthesis gas. Heating values of the synthesis gas were also higher than those from woodchip gasification. There are hundred thousand tons of agricultural plastic wastes generated in Korea every year. Co-gasification of biomass and agricultural plastic waste would provide affordable gaseous fuels in rural society.