• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.439-450
• /
• 2003

Flat plate system has been adopted in many buildings constructed recently because of the advantage of reduced floor heights to meet the economical and architectural demands. Structural engineers commonly use the effective beam width model(EBWM) in practical engineering for the analysis of flat plate structures. However, in many cases, when it is difficult to use the EBWM, it is necessary to use a refined finite element model for an accurate analysis. But it would take significant amount of computational time and memory if the entire building structure was subdivided with finer meshes. An efficient analytical method is proposed in this study to obtain accurate results in significantly reduced computational time. The proposed method employs super elements developed using the matrix condensation technique and fictitious beams are used in the development of super elements to enforce the compatibility at the interfaces of super elements. The stiffness degradation of flat plate system considered in the EBWM was taken into account by reducing the elastic modulus of floor slabs in this study. Static and dynamic analyses of example structures were performed and the efficiency and accuracy of the proposed method were verified by comparing the results with those of the refined finite element model and the EBWM.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.2
• /
• pp.67-76
• /
• 2006

For a hydro power plant project, the headrace tunnel having a finished diameter of 3.3 m was constructed in volcanic rocks with well-developed vertical joint and high groundwater table. The intake facility was located 20.3km upstream of the powerhouse and headrace tunnel of 20km in length and penstock of 440m in height connected the intake and the powerhouse. The typical caldera lake, Lake Toba set the geology at the site the caving of the ground caused tension cracks in the vertical direction to be developed and initial stresses at the ground to be released. High groundwater table(the maximum head of 20bar) in the area of well-connected vertical joints delayed the progress of tunnel excavation severely due to the excessive inflow of groundwater. The excavation of tunnel was made using open-shield type TBM and mucking cars on the rail. High volume of water inflowraised the water level inside tunnel to 70cm, 17% of tunnel diameter (3.9m) and hindered the mucking of spoil under water. To improve the productivity, several adjustments such as modification of TBM and mucking cars and increase in the number of submersible pumps were made forthe excavation of severe water inflow zone. Since the ground condition encountered during excavation turned out to be much worse, it was decided to adopt PC segment lining instead of RC lining. Besides, depending on the conditions of the water inflow, rock mass condition and internal water pressure, one of the invert PC segment lining with in-situ RC lining, RC lining and steel lining was applied to meet the site specific condition. With the adoption of PC segment lining, modification of TBM and other improvement, the excavation of the tunnel under severe groundwater condition was successfully completed.

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.93-104
• /
• 2021

A coastal ferries, which serve as a mode between mainland and offshore islands, are frequently used by islanders and travelers visiting islands. Therefore, it is located in a place with good accessibility to the downtown so that users can use it conveniently. However, research on the built environment and walking environment of coastal ferry terminals has not been conducted to ensure that elderly islanders and general travelers can use comfortably the coastal ferry terminal. In this study, with a focus on the coastal ferry terminal space, the walking section was set as 1)the accessibility of the coastal ferry terminal, 2)the built environment for using the coastal ferry terminal, and 3)walking environment in the ferry boarding and disembarkation at the coastal ferry terminal, and 4, 5)walking environment in the ferry. An evaluation tool was developed to measure the walking environment for each walking section, and the importance and satisfaction of users were analyzed using the IPA for the Yeosu Coastal Ferry Terminal. As a result, in the process of approaching the ferry terminal, 'convenience of using public transportation by foot' and 'convenience of using signposts guiding the location and direction of the ferry terminal' were investigated as concentrated areas. On the other hand, the built environment inside the ferry terminal and the walking environment showed that the satisfaction of the users was high. Regarding the walking environment from the ferry terminal to the ferry, the 'surface walking environment of the walking path', 'convenience of walking with luggage', 'convenience of walking in the slope section', and 'convenience of walking in the ferry ramp section' showed low satisfaction. This study can be used as basic data for improving the facilities and walking environment of Yeosu Coastal Ferry Terminal and is expected to be used as data for comparative research with other coastal ferry terminals.

• Applied Microscopy
• /
• v.30 no.2
• /
• pp.193-204
• /
• 2000

Nowadays, mongolian gerbil is widely utilized in the research of brain and water deprivation because of congenitally incomplete Willis' circle, audiogenic seizure in low noise, and special cholesterol metabolism without water absorption for a long time. In this study, we intended to identify the time lapse changes in the general morphoogy and ultrastructure of the catecholaminergic neurons of mongolian gerbil brain in after long-term water deprivation. Fifteen mongolian gerbils were divided into 3 groups (5, 10, and 20-day water deprivation groups), each with 5 mongolian gerbils. Additional 5 mongolian gerbils which received water without limitation were used as a control. The brain sections were immunostained using tyrosine hysroxylase (TH), $ dopamine-\beta-hydroxylase$ (DBH), and phenylethanolamine-N-methyltrasferase (PMNT) antibodies. And immunoreactive cells were observed by electromicroscopy for the ultrastructural changes . The TH-immunoreactive (TH-IR) nerve cells were observed in the para- and peri-ventricular nucleus of the 3 rd ventricle in the hypothalamus and the substantia nigra. The number of TH-IR neurons in these areas was decreased from the 5th day of the water deprivation to the 10 th day and reincreased until 20 th day water deprivation. The shape and density of the dopamine-secreting cells identified by immunohistochemistry showed changes in the continuous water deprivation. Electron microscopy revealed a round nucleus in the neurons of control group but 5-day water deprivation group showed a dense and irregularly shaped nucleus. Also in the 5-day water-deprived group, mitochondria was decreased in number and junctins were disappered. Endoplasmic reticulum, Golgi complex did not show changes after water-deprivation. In this results, we can conclude that dopamine are involved in the water metabolism in mongolian gerbil, and mongolian gerbil could be used as an animal model for the researches of water deprivation.

• Development and Reproduction
• /
• v.6 no.2
• /
• pp.97-104
• /
• 2002

In most mammals, mature oocyte-cumulus complexer(OCCs) ovulate into the oviduct where fertilization by sperm takes place. However, the complex that fail to fertilize eventually undergoes degeneration while they reside in the oviduct. Yet there is no blown mechanism how both oocyte and cumulus cells degenerate. Using human follicular fluid (hFF), bovine oviductal tissue extract (BOX) and mouse OCC, the present study aimed to find how the oviduct influence the viability of the oocyte and cumulus cells in vitro. There was no difference of oocyte maturation rate between the control and BOX-treated groups. However, there was a significant difference in the survival of cumulus cells between two groups. Cumulus cells cultured in the presence of hFF alone underwent initially expansion and then they formed monolayer in the culture dish. Even after 72 hr, they proliferated well and showed fibroblast-like morphology. Cumulus cells cultured in the presence of both hFF and BOX also expanded after 24 hr, however, after 72 hr culture, they eventually detached and degenerated. Cumulus cells cultured in the BOX alone gave a similar drastic result. When the cumulus cells cultured in the presence of BOX were stained with DAPI, their nuclei showed partial condensation and fragmentation. After detailed analysis of these cells by TUNEL assay, many nuclei of them exhibited well stained spots indicating the signs of apoptosis. Based upon these observations, it is suggested that BOX might possess a factor that leads mouse cumulus cells to undergo apoptosis in vitro.

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.19-27
• /
• 2003

I. Purpose In special cases of Total Body Irradiation(TBI), Half Body Irradiation(HBI), Non-Hodgkin's lymphoma, E-Wing's sarcoma, lymphosarcoma and neuroblastoma a large field can be used clinically. The dose distribution of a large field can use the measurement result which gets from dose distribution of a small field (standard SSD 100cm, size of field under $40{\times}40cm2$) in the substitution which always measures in practice and it will be able to calibrate. With only the method of simple calculation, it is difficult to know the dose and its uniformity of actual body region by various factor of scatter radiation. II. Method & Materials In this study, using Multidata Water Phantom from standard SSD 100cm according to the size change of field, it measures the basic parameter (PDD,TMR,Output,Sc,Sp) From SSD 180cm (phantom is to the bottom vertically) according to increasing of a field, it measures a basic parameter. From SSD 350cm (phantom is to the surface of a wall, using small water phantom. which includes mylar capable of horizontal beam's measurement) it measured with the same method and compared with each other. III. Results & Conclusion In comparison with the standard dose data, parameter which measures between SSD 180cm and 350cm, it turned out there was little difference. The error range is not up to extent of the experimental error. In order to get the accurate data, it dose measures from anthropomorphous phantom or for this objective the dose measurement which is the possibility of getting the absolute value which uses the unlimited phantom that is devised especially is demanded. Additionally, it needs to consider ionization chamber use of small volume and stem effect of cable by a large field.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.183-195
• /
• 2002

흑색 색소를 형성하는 그람음성 혐기성 세균은 급성 임상 증상을 가진 환자의 근관에서 자주 발견되는 세균으로서 세균 및 세균의 성분과 산물이 치근단 병소의 생성과 밀접하게 연관된 것으로 알려져 있다. 본 연구는 흑색 색소를 형성하는 그람음성 혐기성 세균 중 가장 발현율이 높은 Prevotella nigrescens가 배양된 세포에 미치는 세포 독성을 연구하고자 하였다. 두 가지 세포주 및 사람의 치은섬유모세포를 일차배양하여 사용하였으며, 세포주에 따른 독성 발현에 차이가 있는지를 비교하였다. P. nigrescens ATCC 33563 표준 균주 및 임상 균주로는 환자의 감염된 근관으로부터 165 rRNA primer를 사용한 중합효소 연쇄반응으로 P. nigrescens 6 균주를 동정하여 사용하였다. 세균배양액, 세균의 초음파 추출단백질 및 lipopolysaccharide (LPS)를 MC3T3-El 조골세포, NIH3T3 섬유모세포 및 치은섬유모세포에 첨가한 후 MTT분석법으로 세포의 활성을 측정하였으며, 세포의 형태학적 변화를 도립현미경으로 관찰하였다. 세균배양액을 100$\mu\textrm{l}$ 첨가한 경우는 세가지 세포주 모두에서 통계적으로 유의하게 세포의 활성을 억제하였다. 세균의 초음파 추출단백질 12.5$\mu\textrm{g}$/ml 와 25$\mu\textrm{g}$/ml 는 NIH3T3세포에 통계적으로 유의한 세포독성을 보였다. 세 가지 세포주에 대한 LPS의 세포 독성 효과는 첨가된 LPS의 농도 및 균주에 따라 다양하게 나타났다. 심하게 손상된 세포는 세포의 단일층이 수축되고 세포가 응집되었으며 세포가 배양용기의 바닥에서 떨어지는 양상이 도립 현미경하에서 관찰되었다. 본 연구의 결과 P. nigrescens가 숙주 반응을 조절하여 치수 및 치근단 병소의 유발 및 악화에 기여하는 세균으로 작용할 수 있음을 시사한다. 조직과 함께 제거하고 포르말린에서 48시간 고정시킨 후 파라핀에 포매한 다음에 micro-tome을 사용하여 6$\mu\textrm{m}$로 serial section을 시행하였다. 정중선 부위의 시편에 Hematoxylin-Eosin staining을 시행한 후 Olsson, Orstavik 그리고 Mjor 등의 방법에 따라 조직학적 변화를 관찰한 후 slight(1), moderate(2), severe inflammation(3)의 단계로 분류하였다. 얻어진 결과를 통계처리 프로그램인 Jandel사의 Sigmastat을 이용하여 Kruskal Wallis Test로 통계처리를 하였다. 결과 : (Table omitted) 결론 : 1) Pulp Canal Sealer를 제외한 모든 군에서 시간이 지남에 따라 유의성 있게 염증이 감소되는 양상을 보였다(p<0.05). 2) Pulp Canal Sealer는 1주, 2주, 12주에서 강한 염증반응을 보였다. 3) AH 26과 AH Plus에서는 1주, 2주에서 강한 염증반응을 보였으나 12주에서는 염증반응이 감소하였다. 4) 새로 개발된 봉함제 Adseal-1,2는 1주, 2주에서는 가장 약한 염증반응을 보이나 4주, 12주 후에는 AH Plus와 비슷한 수준의 염증 반응을 보였다. 5) Pulp Canal Sealer를 제외한 모든 군에서 인정할 만한 생체친화성을 보였다. 6) Adseal-2가 Adseal-1에 비하여 전반적으로 낮은 염증반응을 보였다. 7) 각 군간 결과의 차이에 통계적 유의성은 없었다(p>0.05).mmunity. Then, a hierarchical language is to defeat its own purpose.중 행정부가 북한에 대해 실시한 포용정책이 어떠한 성과를 거두고 어떠한 문제점을 간과하고 있는가에 대해 논의하고, 대북 정책의 새로운 지평을 논의하는 것을 목적으로 하고 있다. 1) 포용 정책은 세계의

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.225-232
• /
• 2017

Most of the red ginseng (RG) products contain active substances derived from hot water or alcohol extraction. Since active substances of RG are divided into two types - water-soluble and liposoluble - water or alcohol is needed as an extraction solvent and this leads the different extraction yields and components of the active substances. To overcome the limit, whole red ginseng powder can be used and consumed by consumers. In this study, the physicochemical properties and extractable active substance contents of variable-sized RG powder ($158.00{\mu}m$, $8.45{\mu}m$, and $6.33{\mu}m$) were analyzed, and dispersion stability was measured to investigate the suitable size of RG powder for industrial processing. In the results, no significant difference was found from the changes in color intensity and thiobarbutric acid tests at $4^{\circ}C$, $25^{\circ}C$, and $40^{\circ}C$ for 4 weeks. There was no significant difference on the production of antioxidants and ginsenoside among the samples (p>0.05). In dispersion stability, $RG-158.00{\mu}m$ was precipitated immediately, and the dispersion stabilities between $RG-8.45{\mu}m$ and $RG-6.33{\mu}m$ showed no significant difference. It implies that fine RG is suitable for the production process. With further study, it seemed that the physicochemical effects of RG particle sizes can be clearly revealed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.395-406
• /
• 2006

Drilled shafts are a common foundation solution for large concentrated loads. Such piles are generally constructed by drilling through softer soils into rock and the section of the shaft which is drilled through rock contributes most of the load bearing capacity. Drilled shafts derive their bearing capacity from both shaft and base resistance components. The length and diameter of the rock socket must be sufficient to carry the loads imposed on the pile safely without excessive settlements. The base resistance component can contribute significantly to the ultimate capacity of the pile. However, the shaft resistance is typically mobilized at considerably smaller pile movements than that of the base. In addition, the base response can be adversely affected by any debris that is left in the bottom of the socket. The reliability of base response therefore depends on the use of a construction and inspection technique which leaves the socket free of debris. This may be difficult and costly to achieve, particularly in deep sockets, which are often drilled under water or drilling slurry. As a consequence of these factors, shaft resistance generally dominates pile performance at working loads. The efforts to improve the prediction of drilled shaft performance are therefore primarily concerned with the complex mechanisms of shaft resistance development. The shaft resistance only is concerned in this study. The nature of the interface between the concrete pile shaft and the surrounding rock is critically important to the performance of the pile, and is heavily influenced by the construction practices. In this study, the influences of asperity characteristics such as the heights and angles, the strength characteristics and elastic constants of surrounding rock masses and the depth and length of rock socket, et. al. on the shaft resistance of drilled shafts are investigated from elasto-plastic analyses( FLAC). Through the parametric studies, among the parameters, the vertical stress on the top layer of socket, the height of asperity and cohesion and poison's ratio of rock masses are major influence factors on the unit peak shaft resistance.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.4
• /
• pp.8-20
• /
• 2023

Although the landscape architectural facilities need to be repaired according to historical and authentic techniques, the repair criteria of the standard specification for repairing cultural heritages still remain at a theoretical level, and there are little research analyzing detailed techniques from specific cases. This study discussed the repair techniques based on historical facts, around terraced flower beds, ponds, waterways and pavement in the government-managed spaces in the Joseon Dynasty. It analyzed the materials and finish of stone wall elements, the structural reinforcement and backfill materials, and topsoil surface protection measures, and drew out stones for foundation reinforcement, plastering material for agglutination, and stone processing techniques for the terraced flower beds. It examined the materials and structures of the rock revetment, foundation reinforcement and waterproofing techniques and drew out the outstanding characteristics of the foundation work, the recycle of used elements and the management of water quality, for the ponds. It primarily investigated the materials, foundation reinforcement and waterproofing techniques and discovered the repair techniques such as cover stone finishing methods, foundation and backfill materials, and flow reduction methods, for the waterways. Finally, it provided actual cases of the foundation composition, auxiliary materials and tools, and the use of cyperaceae and highlighted the existence of professional craftsmen called Bangjeonjang(方磚匠), for the pavement. This study is expected to be a staring point for discovering the repair techniques for landscape architectural facilities and used as basic data for revising specifications in the future.