• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.6
• /
• pp.532-539
• /
• 2008

Kwon et al.(2008) carried out a hydraulic experiment in order to evaluate Manning coefficient, which implicates flow resistance due to bottom friction as well as drag caused by the squared piers higher than water depth and arranged with equal intervals, under the flow condition with a constant drag coefficient, $Re>10^4$. And, based on the equation of equilibrium, they proposed a formula for the equivalent resistant coefficient including empirical drag interaction coefficient obtained by using the experimental results. In this study, the hydraulic experiment was simulated using FLOW-3D, a 3-dimensional computational fluid dynamic code. The computations were compared with the experiment results as well as the semi-theoretical formula, and the comparisons show a good agreement. From the agreement, it was confirmed that when flow resistance bodies were higher than water depth, Manning n value increases with 2/3 power of water depth as shown in the theoretical formula and that drag interaction coefficient was dominated by their intervals.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.172-172
• /
• 2013

최근에 디스프로슘 이온이 도핑된 형광체의 백색 발광 현상 때문에 백색 발광 소재의 제조에 관한 연구가 상당한 관심을 끌고 있다. 본 연구에서는 $Eu^{3+}$와 $Dy^{3+}$ 이온의 몰 비를 변화시키면서 $BaNb_2O_6:RE^{3+}$ (RE=Eu, Dy) 형광체 분말을 합성한 결과를 보고한다. 특히 활성제 이온인 $Eu^{3+}$와 $Dy^{3+}$ 이온의 몰 비에 따른 $BaNb_2O_6$ 형광체 분말의 결정 구조, 입자의 모양과 크기, 흡광과 발광 스펙트럼의 변화를 관측하였고, 최적의 합성 조건을 제시하고자 한다. 파장 393 nm로 여기 시킨 $Dy^{3+}$ 이온의 몰 비에 따른 $BaNb_2O_6$ 형광체 분말의 발광 스펙트럼은 580 nm에 주 피크를 갖는 황색 스펙트럼이 관측되었다. 이 발광 신호는 $^4F_{9/2}-^6H_{13/2}$ 전이 신호이다. $Dy^{3+}$ 이온의 몰 비가 0 mol인 경우에는 발광 신호가 검출되지 않았다. $Dy^{3+}$ 이온의 몰 비가 0.10 mol일 때 발광 피크의 세기는 최대이었으며, $Dy^{3+}$ 이온의 몰 비가 더욱 증가함에 따라 발광 스펙트럼의 세기는 계속 증가하지 않고 갑자기 감소하기 시작하였다. 이것은 $Dy^{3+}$ 이온의 몰 비가 임계값을 초과하여 더욱 증가하면 모체 격자들 사이에 치환 고용되어 있는 $Dy^{3+}$ 이온들 사이의 거리가 더욱 가까워져서 $Dy^{3+}$ 이온들이 서로 용이하게 결합함으로써 내부 산란에 의하여 발광의 세기가 감소함을 의미한다. 흡광 스펙트럼의 경우에, $Dy^{3+}$ 이온의 몰 비가 0.01 mol일때 형광체 분말은 두 종류의 흡광 스펙트럼을 나타내었다. 첫째는 $Dy^{3+}$ 양이온과 $O^{2-}$ 음이온들 사이에 발생한 전하 전달 밴드에 의해 발생하는 310 nm를 정점으로 하여 280~340 nm 영역에 걸쳐서 광범위하게 분포하는 흡광 신호가 관측되었으며, 둘째는 $Dy^{3+}$ 이온의 $4f^9$ 전자 배열 내에서 발생하는 4f-4f 전이 신호로서, 이것은 350~500 nm 영역에 걸쳐서 비교적 밴드폭이 좁은 다수의 흡광 신호가 나타났다. 본 실험에서는 다섯 개의 피크를 갖는 흡광 신호가 검출되었는데, 이중에서 제일 강한 주 피크인 393 nm의 흡수 파장은 모체 격자 내에 있는 $Dy^{3+}$ 이온의 바닥 상태인 $^6H_{15/2}$ 준위에서 여기 상태인 $^4F_{7/2}$ 인 에너지 준위로 전이하면서 발생한 신호이며, 이에 비하여 상대적으로 흡광 세기가 약한 370, 432, 458, 370 nm의 흡수 파장이 관측되었다.

• Korean Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.459-467
• /
• 2007

The effects of turbid water on fish community was investigated in a clear reference stream (the Bongsan Steam) and a turbid stream (the Daegi Stream) located in the upstream region of the South Han River, Korea. The stress index (SI) of suspended solids (SS) were calculated during a rain event concentration by the equation SI=LN (SS${\times}$duration). EMC of SS was $1{\sim}13$ mg $L^{-1}$ in the clear stream with a mean SI of 5.2, while SS was $97{\sim}1,150$ mg $L^{-1}$ in the turbid stream with a mean SI of 10.3. Even though the number of species was not much different, the dominant species of the two steams were distinctly different. The reference stream was dominated by upstream species such as Rhynchocypris kumgangensis, Brachymystax lenok tsinlingensis, and Cottus poecilopus which are typical upstream community. Whereas the turbid streams was dominated by Rhynchocypris kumgangensis, Zacco koreanus, and Orthrias nudus which are representatives of middle reache community. Fish density was four times higher in the clear steam than the turbid stream. In the similarity analysis of fish communities the community of the turbid stream showed large dissimilarity with other communities in other streams of similar size. In conclusion, although turbidity might be at the sublethal concentration, fish communities are under stress in some turbid streams of Korea that is strong enough to induce community change. It can be an example of a chronic ecological toxicity of turbidity at the community level.

• Journal of Korea Water Resources Association
• /
• v.52 no.3
• /
• pp.227-234
• /
• 2019

The vulnerability of urban disasters is increased with the rapid urbanization and industrialization, and the extreme rainfall event is increased due to the global climate change. Urban inundation is also increased due to the extreme rainfall event beyond the capacity limit of facility for the damage prevention. The underground detention vault and the underground drain tunnel are rapidly being utilized to prevent urban inundation. Therefore, the hydraulic review and design analysis of the inlet of the underground facility are important. In this study, the water level of the approach flow according to the inflow discharge is measured and the flow characteristic of the inlet (tangential and spiral) is analyzed. For the spiral inlet, the multi-stage is introduced at the bottom of the inlet to improve the inducing vortex flow at low discharge conditions. In case of the tangential inlet, the discharging efficiency is decreased rapidly with hydraulic jump in the high flow discharge. The rising ratio of the water level in the multi-stage spiral inlet is higher than the tangential inlet, but the stable discharging efficiency is maintained at low and high discharge conditions. And the empirical formula of water level-flow discharge is derived in order to utilize inlets used in this study.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.28-36
• /
• 2019

The APR1400 (Advanced Power Reactor 1400MW) nuclear power plant is a large-scale national infrastructure facility with a total project cost of 8.6 trillion won and a project period of 10 years or more. The total project area is about 2.17 million square meters and consists of more than 20 buildings and structures. And the total number of drawings required for construction is about 65,000. In order to design such a large facility, it is important to establish a design standard that reflects the design intent and can increase conformity between documents (drawings). To this end, a design bases document (DBD) reflecting the design bases that extracted in regulatory requirements (e.g. 10CFR50, Korean Law, etc.) is created. However, although the design bases are important concepts that are a big framework for the whole design of the nuclear power plant, they are managed in 2-dimensional by the experts in each field fragmentarily. Therefore, in order to improve the usability of building information, we developed BIM(Building Information Model) based 3-dimensional design bases management system. For this purpose, the concept of design bases information layer (DBIL) was introduced. Through the simulation of developed system, design bases attribute and element data extraction for each DBIL was confirmed, and walls, floors, doors, and penetrations with DBIL were successfully extracted.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.235-243
• /
• 2019

Recently, urban inundation was frequently occurred due to the intensive rainfall exceeding marginal capacity of the flood control facility. Furthermore, needs for the underground storage facilities to mitigate urban flood are increasing according to rapidly accelerating urbanization. Thus, in this study, drainage efficiency in drain tunnel connecting to underground storage was investigated from the air-core measurements in the drop shaft against two types of inlet structure. In case of the spiral inlet, the multi-stage structure is introduced at the bottom of the inlet to improve the vortex induction effect at low inflow discharge (multi-stage spiral inlet). The average cross-sectional area of the air-core in the multi-stage spiral inlet is 10% larger than the tangential inlet, and show the highly air emission effect and the highly inflow efficiency at the high inflow discharge. In case of the tangential inlets, the air emission effect decreased after exceeding the maximum inflow discharge, which is required to maintain the inherent performance of the tangential inlet. From the measurements, the empirical formula for the cross-sectional area of the air-core according to locations inside the drop shaft was proposed in order to provide the experimental data available for the inlet model used in experiments.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.3-12
• /
• 2021

In the remodeling projects, clients without architectural expertise have limitations in presenting requirements accurately. In some cases, designers and contractors may not recognize their demands exactly, and deliver final products that are different from the clients' intentions. 3D modeling visualizing final products in previous has been regarded as a solution to enhance understanding and communication. However, this approach has the limitation that the final results are presented as a virtual outputs. In the remodeling project, an alternative, mixed-reality, is likely to reinforce the reality as it enables to present remain structure and the parts to be built together. This paper examines the mixed reality as a solution to support decision making of clients and practitioners in remodeling projects. The examinations is conducted in high-rise office remodeling projects by means of action-research. Clients and practitioners, overview product models presented in the format of 2D drawings, BIM and mixed reality asked to evaluate the effectiveness of each methods in 12 standards. The results have shown that mixed reality has improved the sense of reality, making it easier to predict results, but recognizing patterns is difficult in some areas such as the floor, and it caused dizziness.

• Korean Journal of Environment and Ecology
• /
• v.34 no.6
• /
• pp.551-557
• /
• 2020

This study surveyed the ecological characteristics of Ladislabia taczanowskii at Songcheon Stream from March to November 2019. The species inhabited upstream, where the riverbed structure was mostly covered with boulders and cobbles. The water depth was 31-148 cm, and the stream velocity was fast at 0.94±0.23 (0.51-1.39) m/sec. The gender ratio of females to males was 1 : 0.89. The age according to the total length frequency distribution indicated that the group with 38-70 mm below in total length was one year old, the group with 70-100 mm was two years old, the group with 100-120 mm was three years old, and the group over 120-128 mm was over four years old. The total length of sexually mature fishes was 70 mm for females and 75 mm or more for males. The spawning season was from May to August, and the water temperature was 15.5-20.1℃ during the period. The prosperous spawning season was from June to July, and the water temperature was 15.8-17.2℃ during the period. The spawning ground was where the riffle began in the pool, and its bottom was formed of sand and gravel. The width was about 150 cm, and the water depth was 20 to 50 cm. The average number of eggs in the ovaries was 821 (401-1,314) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 1.62±0.02 (1.43-2.01) mm. The live foods of L. taczanowskii Cyanophyta, Chlorophyta, Bacillariophyta, Ephemeroptera, and Diptera. The feeding habit of L. taczanowskii is omnivorous, but more than 90% of the stomach content was attached algae.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.99-109
• /
• 2022

This study was intended to suggest the applicability of stepped boulder fishway using the concept of traditional boulder weir, focusing on the problems of existing concrete pool-and-weir fishways installed in mountain streams. To achieve this purpose, a stepped boulder fishway was designed and constructed as a pilot project in consideration of ascending capacity of the selected target fishes. Under the given discharge conditions, the hydraulic characteristics of the fishway were investigated in the field, and the characteristics and ascending capacity of the fishes were compared and analyzed. The fishway had a short length and steep slope, but the mean drops between each baffle were the range of 0.15 to 0.29 m, and this range satisfied the limit condition of about 0.40 m, which was in the limit of the drop that target fishes can ascend. The mean velocities of each baffle and pool were 0.82 to 0.87 m/sec and 0.13 to 0.24 m/sec. This result satisfied the conditions of burst speed (10 to 30 times of body length) and mean velocity of the resting pool (7 to 25% of burst speed) for target fishes. Since the bottom surface of the pool formed of boulders had a gentle reverse slope and rotational flow did not occur, the efficiency of fishway can be increased, and it will also be possible to solve the maintenance problem by flushing bed materials.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.670-678
• /
• 2021

Anseong Cheonryongsa, a temple located in Anseong Seoun Mountain, is a part of the second Jogye Order of Korean Buddhism, under the Yongju Temple, and enshrines a gilt-bronze seated Avalokitesvara Bodhisattva. In this study, X-ray fluorescence (XRF) analysis revealed that this statue is composed of Cu-27.2 wt%, Sn-12.6 wt% and Pb-48 wt%. A gamma (γ) ray (Ir-192) image confirmed damage on the backside of the statue, which was later repaired with wood. The XRF analysis and visual observation determined the boundary between the metal and wood in the statue. In addition, results of standard X-ray peak intensity of gold foil and correlation with thickness helped to derive an equation for calculating the thickness of the Avalokitesvara Bodhisattva's gold foil. It was determined that the gilded chest (21 ㎛) and face (20.7 ㎛) of the statue were the thickest sections, the wooden substratum (11.9 ㎛) was the next-most thick, and the bronze (7.4 ㎛) was the thinnest layer.