• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.210-217
• /
• 2022

In this paper, a study is conducted on the acceptable tolerance of an alignment device to reduce the optical loss caused by the alignment tolerance of a window hermetic optical connector. To increase the transmission distance of optical signals and fiber-optic communication systems, it is necessary to maintain and improve the high optical efficiency of the connectors used to bond optical fibers. In the case of the window hermetic optical connector, the optical system is aligned through an alignment device. At this time, since the two connectors are used together, each component is fixed, and further alignment is impossible. The alignment tolerance of the housing system and pin used to align the optical system of the connector causes optical loss, leading to serious problems in the fiber-optic communication system. Thus, to find the acceptable tolerance required for manufacturing the optical-connector alignment device, tolerance analysis is performed on the components of the optical connector, such as the ball lens and the window. We also implement single-mode and multimode optical-connector systems, respectively. Based on the results, we determine an acceptable tolerance value for the alignment device.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3262-3271
• /
• 1996

Flow patterns were measured in a shrouded centrifugal impeller. The flow rate in measurements was fixed at the value corresponding to a nearly zero incidence at the blade inlet. By using a single slanted hot-wire probe and a Kiel probe mounted on the impeller hub disk, the 3-D relative velocities and the rotary stagnation pressures were measured in seven circumferential planes from the inlet to the outlet of impeller rotating at 700 rpm, and the static pressure distribution along flow passage and the slip factor at impeller outlet were calculated from the measured values. From these measured data, the primary and secondary flows, the wake production and the static pressure rise in the impeller passage were investigated. Furthermore, the secondary flow patterns and the wake's location in this impeller passage were compared with those of the unshrouded impeller.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.61-71
• /
• 1988

본 논문에서는 Laser Rayleigh Pyrometer에 의한 광학계의 개조와 측정기술을 발전시켜 지금까지의 측정이 불가능한 밀폐용기내에서 분출화염의 온도측정을 시도하여 분출화염에 의한 착화나 소염의 연구에 중요한 자료를 얻고자 하는데 있다. 밀폐용기내에서의 온도측정은 대기개방형에서와 같이 Laser의 에너지를 증대시키기 위해 이용한는 다중반사 Mirror가 사용될 수 없을 뿐만 아니라 약한 Rayleigh산란빛에 의하여 입사창이란 Laser Trap으로 발생하는 강한 배경광 및 분출화염 뿐만 아니고 착화된 화염에서 대량의 화학발광은 피할 수 없다. 본 논문은 이와 같은 영향을 제거하는데 노력하여 밀폐용기내의 연소장에서 온도를 측정하였으며 또 측정가능성을 시사하였다.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.68-74
• /
• 2010

The aim of this study is to investigate the behaviors of synthesis of Calcium Chloroaluminte($11CaO{\cdot}7Al_2O_3{\cdot}CaCl_2$) under the melting temperature of municipal solid waste incineration fly ash(MSWI fly ash); $900^{\circ}C-1300^{\circ}C$ of sintering temperature. A sludge generated from a water purification plant (SW) was also used to fill up $Al_2O_3$ source, which might be deficient in MSWI fly ash. MF and SW were mixed at mixing ratio of 10 to 7, which is the mole ratio of CaO to $Al_2O_3$ of calcium Chloroaluminte. Mixed samples were sintered in the opened sintering reactor and the closed sintering reactor, respectively. The results showed that calcium chloroaluminte was formed at $1,000^{\circ}C$ in both reactors, but the temperature of decomposition of calcium chloroaluminte depended upon sintering reactor type; an opened sintering reactor and a closed sintering reactor, owing to the vaporization velocity of Cl.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1997.05a
• /
• pp.59-61
• /
• 1997

무토양재배시스템은 가급적 경량화이면서 집약적인 형태를 가지며, 환경보존차원을 위하여 밀폐형 순환식 재배시스템이 중시되고 있다. 무토양재배시스템은 DFT에서 NFT나 고형배지로 갈수록 외기의 환경변화에 대하여 비교적 근권부근의 환경변화가 크기 때문에 노출되어 있는 뿌리에 영향을 미치는 것으로 사료된다. (중략)

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.1-7
• /
• 1987

스터링 엔진은 1816년 로버트 스터링에 의해 발명된 밀폐형 외연기관이다. 초기에는 왕복형 증기기관과 더불어 구미제국에 널리 보급되었으나, 실용화 기술의 부족으로 인한 잦은 고장과 가솔린 및 디젤엔진의 발명으로 인해 자취를 감추었다. 그 후 1938년 네덜란드의 필립스사(Philips Co.)에 의해 연구가 재개되고, 간헐적으로 진행되다가 최근에 연료의 다양화, 에너지절약, 환경보존 등에로의 강한 요구와 재료기술 및 생산기술의 진보로 인하여 이 엔진이 다시 주목되어 구미, 일본 등에서 연구 개발되고 있다. 미국에서는 1978년부터 정부적 차원에서 개발을 시작하여 일부는 상용화되어 있고, 일본에서는 1982년 이래로 계속 개발을 수행하고 있고, 그 외에도 유럽의 여러 나라들에서도 활발한 연구가 진행되고 있다.

• Proceedings of the SAREK Conference
• /
• 2004.11a
• /
• pp.18-18
• /
• 2004

• Land and Housing Review
• /
• v.12 no.3
• /
• pp.39-50
• /
• 2021

This research aims to provide guidelines with the appropriate type of smart bus stop to reduce the concentration of fine dust. To this end, we divided smart bus stops into two types: closed and open bus stops. The estimated reduction effect was compared and analysed by measuring the estimated PM₁₀ and the estimated PM_2.5 at five locations inside and outside a smart bus stop located in Gangnam gu, Seoul. The effect of reducing the amount of the fine dust concentration in external space was insignificant for both types of bus stops. The different effect of reducing the concentration of the amount between in internal space was relatively significant: the fine dust concentration was 26.0 ㎍/m³ for PM₁₀ and 20.2 ㎍/m³ for PM_2.5 at open-type bus stops; whilst was 2.4 ㎍/m³ for PM₁₀ and 1.8 ㎍/m³ for PM_2.5 at closed type bus stops. Based on the findings, a closed type bus stop is recommended when considering the cost of reducing fine dust. In addition, due to the ineffectiveness of reducing the amount of fine dust from the outside of the bus stop, additional provision of smart bus stops is required particularly in locations where demand exceeds the capacity of the inside. A clear definition of smart bus stop and it's minimum standard should also be considered.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.26-32
• /
• 1997

In this study, the interior acoustic field of a speaker system with rectangular closed cavity and its effect on the impedance and the sound pressure reponses are investigated by applying the finite element method to the rectangular enclosure. Based on a good agreement with the theoretical and the experimental, it is founded that FEM is useful method for the development of a speaker system generating the diverse mode.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.167.1-167.1
• /
• 2010

본 연구에서는 수직 밀폐형 지중열교환기 뒤채움용 그라우트의 종류와 첨가재 종류, 지중열교환기 파이프 단면에 따른 지중열교환기의 성능을 비교 평가하기 위해 현장 시험 시공과 현장 열응답 시험을 수행하였다. 뒤채움용 그라우트재는 벤토나이트와 시멘트를 사용하였으며 첨가제로는 천연규사와 흑연을 적용하였다. 지중열교환기 파이프 단면은 일반적으로 시공되는 U-loop 파이프 단면과 파이프 사이의 열간섭 효과를 최소화 한 3공형 파이프 단면이 적용되었다. 시멘트-천연규사 그라우트재가 벤토나이트-천연규사 그라우트재 보다 큰 지중 유효열전도도를 보이고 흑연을 첨가한 그라우트는 시멘트와 벤토나이트 모두에서 천연규사만 첨가하였을 때 보다 지중 유효열전도도가 높게 나타났다. 3공형 파이프 단면의 경우 단면에 따른 영향을 비교하기 위해 그라우트는 시멘트-천연규사와 벤토나이트-천연규사를 사용하였으며 지중 유효열전도도 측정결과 각각 3.64 W/mK, 3.40 W/mK으로 일반 U-loop 파이프 단면을 사용하였을 때 보다 높게 나타났다.