• 베이커리
• /
• no.5 s.370
• /
• pp.92-93
• /
• 1999

• 발명특허
• /
• v.6 no.1 s.59
• /
• pp.56-56
• /
• 1981

• 소프트웨어세계
• /
• s.4
• /
• pp.13-16
• /
• 1999

• The monthly packaging world
• /
• s.6
• /
• pp.114-115
• /
• 1993

• 베이커리
• /
• no.11 s.352
• /
• pp.76-77
• /
• 1997

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1297-1303
• /
• 2015

The internal chromium plating of a long-axis tube is widely used in military and industrial application, with the thick hard plating formed using a mixed solution of Chromium acid and catalytic $H_2SO_4$. A large-caliber gun can endure a high explosive force as a result of the increased stiffness and wear resistance provided by this internal hard chromium surface. The internal chromium layer of a tube is prone to exfoliation caused by the high kinetic energy of the projectile and high pressure of the explosion. Therefore, we reviewed the plating process. Chromium plating comprises many steps, including the removal of Grease, water cleaning, electrolytic abrasion, etching, plating, water cleaning, and hydrogen brittleness removal. The exfoliated chromium plating layer is affected by the adhesion property of the plating. In particular, the Fe concentration of the electrolyte affects the adhesion property. The optimum Fe concentration for effectively suppressing the exfoliation of the plating layer was established by using a scanning electron microscope to determine the surface roughness, and the effectiveness was proved in an adhesion test, etc.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.34-41
• /
• 1998

To oxide film, $A1_2O_3,\;Ta_2O_5$ and $ZrO_2$, coated on stainless steel (SUS410, SUS304) and pure Fe using RF magnetron sputtering method, the corrosion resistance on oxide coatings was studied using electrochemical measurement. Also, the adherence between film and substarte was studied. The adherence index ( $\chi$ ) was determined by the measure of micro hardness test. In this paper, we know that oxide film coated on SUS304 have better corrosion resistance than that coated on SUS410. In oxide film, the difference of corrosion resistance due to crystal structure have not been showed. In evaluating defect area rate of ceramic coated materials, CPCD method can be used effectively. In the micro-hardness test, with $1{\mu}m$ thickness film, it has only one the value of $\chi$. Above $2{\mu}m$ thickness film, however, get another value of $\chi$ as the cracks in film. The oxide film adhere well on the mild materials such as pure steel than high intensity materials like stainless.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.88-88
• /
• 2017

Zn코팅은 우수한 내식성과 경제성을 바탕으로 자동차나 건축자재 등 산업의 전반적인 분야에서 광범위하게 사용되고 있다. 하지만 최근 한정된 Zn의 매장량으로 인한 원자제의 가격상승과 습식 도금과정의 환경오염 물질 배출 문제가 기존 Zn 코팅의 약점으로 지적되고 있다. 따라서 새로운 원소의 첨가로 인한 Zn의 사용량 감소나 친환경적인 공정방법을 적용하는 연구가 대두되고 있다. 최근의 연구 결과에 따르면 Zn-Mg 합금이 다른 Zn계 합금에 비해 내식성이 우수하며, 이와 같은 우수한 내식성은 $Mg_2Zn_{11}$, $MgZn_2$와 같은 Mg-Zn 이원계의 합금상에 의한 것으로 알려져 있다. 따라서 본 연구에서는 친환경적인 비대칭 마그네트론 스퍼터 공정을 활용하여 다양한 공정조건 하에서 Zn-Mg 박막을 합성하여 최적의 공정 조건을 도출하고자 하였다. Zn-Mg 박막 합성 시 Mg타겟의 조성은 3~10 wt.%로 변화하였으며 Zn-Mg 합금 타겟의 온도를 제어하여 박막의 Mg 조성과 타겟 온도가 Zn-Mg 도금강의 내식성 및 밀착성에 미치는 영향을 평가하였다. 합성된 Zn-Mg 박막은 FE-SEM, EDS, XRD를 사용하여 미세조직, 두께, Mg 조성, 합금상 등을 분석하였으며, 염수분무시험 및 0T 굽힘 시험을 활용하여 Zn-Mg 박막의 내식성 및 내식성을 비교 분석하였다. FE-SE및 EDS분석 결과 Zn-Mg 박막의 Mg 조성은 합금 타겟의 조성이 증가함에 따라 증가하였으며, Mg 함량이 증가할수록 미세구조가 치밀하게 변화하였다. 또한 Zn-Mg 박막 합성 중 타겟의 온도가 상승할수록 박막의 치밀도는 감소하였다. XRD분석 결과 박막을 이루는 주요 합금상은 Zn상과 $Mg_2Zn_{11}$상이며 본 연구에서는 증착 조건에 따른 합금상의 큰 변화는 보이지 않았다. 염수분무실험 및 밀착성 평가 결과 박막의 미세조직이 치밀할수록 Zn-Mg 도금강의 내식성은 향상되었으나, 밀착성은 오히려 감소하는 경향을 나타내었다. 이러한 결과는 Zn-Mg 박막이 치밀한 미세구조일수록 부식환경에서의 강판에 대한 보호 효과는 증가하는 반면, 변형 시 박막의 파괴로 인한 박리 현상이 가속되기 때문으로 판단된다.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.575-580
• /
• 2000

Diamond thin films were deposited on $Si_3N_4$, SiC, TiC and $Al_2O_3$, substrates by the CVD method using Ta(TaC)Filament, and the appearance of the diamond films and their adhesion properties were examined by SEM, optical microscopy, indentation test and compression topple test. Diamond films were deposited at lower $CH_4$ concentration than 5%$CH_4$ for all kinds of the substrate material, but graphitic(amorphous)carbon was observed at 10%$CH_4$. The diamond film of about $12\mu\textrm{m}$ thickness on WC substrate partly peeled off, but the film on $Si_3N_4$ substrate held good adhesion. The indentation test showed that roughly ground surface was very effective for adhesion of diamond films to substrate. The topple test revealed that film thickness was an important factor governing the adhesion of the diamond film.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.168-172
• /
• 2010

Superhydrophilic thin film consisted of positively charged poly (allylamine hydrochloride) (PAH) and negatively charged poly (acrylic acid) (PAA) was fabricated by a layer-by-layer (LBL) self-assembly. Glutaraldehyde (GA) was used in order to increase an adhesion hardness by amine-aldehyde reaction. The surface morphology, thickness, transmittance, water contact angle and adhesion hardness of PAH/PAA thin film with or without GA were measured. The adhesion hardness of PAH/PAA thin film with GA deposition increased over 2 times although the film thickness of PAH/GA/PAA decreased than that of PAH/PAA thin film. The increase of adhesion hardness by amine-aldehyde reaction between PAH and GA was measured by fourier transform infrared (FT-IR) spectroscopy. Fabricated PAH/PAA and PAH/GA/PAA thin films showed water contact angel under $5^{\circ}$ and high transmittance over 91.3% at 550 nm.