• Journal of the Korean Magnetics Society
• /
• v.9 no.2
• /
• pp.121-126
• /
• 1999

This paper describes a fabrication of Fe-dispersed hydrophilic magnetic fluid and its application to oil seal in combination with the Nd-permanent magnet. The results are as follows; 1) Using silica coated iron particle of magnetization of 125.5 emu/g (at 10 kOe) and the mean particle size of 100 $\AA$, after multiple adsorption to the surface of silica coated iron particle with oleic acid ion, D.B.S. and T.M.A. ion, hydrophilic Fe-magnetic fluid [70 %(g/∝)Fe, magnetization of 52 emu/g and viscosity of 1450 cp] can be produced by dispersing the iron particle in ethylene glycol solution. 2) The oil seal apparatus consisting of six stages of Nd-permanent magnet (3200 Gauss) and Fe-magnetic fluid [70 %(g/∝) Fe] showed an excellent pressure resistance of 7400 g/$\textrm{cm}^2$ under the gap between shaft and oil seal was 0.2 mm.

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.225-236
• /
• 1994

The sudden discharge of the loop seal water, which is present upstream of the SEBIM POSRV, creates large momentum and inertia forces on the downstream of the discharge piping system. This study provides the procedures and results of analysis of the thermal-hydraulic transient in the SEBIM POSRV discharge piping during the valve opening. The analysis is peformed by RELAP5/MOD3. The appropriate modeling of the discharge piping system, SEBIM POSRV opening characteristics, and loop seal water discharge for the RELAP5/MOD3 analysis is suggested. Also performed is the sensitivity study for the selection of proper options for the junction and volume control. flags. The analysis results demonstrate the adequacy of the RELAP5/HOD3 for the thermal-hydraulic transient analysis of the loop seal water discharge of the SEBIM POSRV discharge piping system. From the sensitivity analysis results, it is shown that the smooth area change option with reasonable geometric pressure drop distribution, non-equilibrium option, and proper time step should be selected for loop seal water discharge analysis.

• Tribology and Lubricants
• /
• v.7 no.2
• /
• pp.1-12
• /
• 1991

기계시스템의 구조는, 공통적으로 사용되고 있는 요소적 부품에 의해 구성되고, 이들 요소적 부품을 기계 요소(machine element)라 하여, 구조의 단위로 되고있다. 접촉식 밀봉장치는, 회전기계, 예를들면, 자동차, 선박, 반응식각반기, 펌프, 터빈, 엔진, 가정용기기등의 주로 베어링부분의 윤활유나 처리액의 기기밖으로의 누설방지장치로서 불가결한 기계요소이다. 또, 시점을 바꾸어 보면 밀봉장치(seal)의 밀봉기능은, 현재 전세계적인 과제인 성자원대책, 성에너지대책, 환경오염대책에도 밀접히 관계하고 있어, 기술적으로 더욱 개선이 요구되고 있다. 본 고에서는, 대표적인 접촉식 밀봉장치를 예로, 밀봉장치의 특징, 밀봉장치의 윤활특성, 밀봉장치에 관한 연구의 동향을 설명한다. 본 고는 저자들의 기술적 교류 가운데서 태어난 성과로, 기술의 세계에 국경이 존재하지 않는다고 증표로서, 관계자의 참고가 될 것으로 기대한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2261-2267
• /
• 1992

The equations are derived for the evaluation of the axial contact force. The contact forces for rubber seals are analyzed as a function of the ratio of real contact length, the thickness of seal lip, the inclined angle of seal lip, and the interference between the edge of seal lip and the rotating inner ring. The design data for rubber seals are presented in terms of the ratio of real contact length, initial inclined lip angle, lip thickness and the interference. The calculated results show that the deflected interference and the circumferential stress cause considerable change of contcat forces for the low sealed pressure.

• Plant Journal
• /
• v.7 no.1
• /
• pp.56-63
• /
• 2011

The identifying cause of leakage problems on mechanical seal in a feed water pump of power plant have been difficult because of technical limits of domestic mechanical seal manufacturer and the various conditions of power plants. This paper can get a conclusion through the consideration study and experiment test of mechanical seal characteristics of feed water pump depending on oxygen treatment as follows. The oxygen treatment increase dissolved oxygen and cause a corrosion on the mechanical seal stationary ring composed of antimony as well as leakage problems. For solving leakage problems of seal, to eliminate dissolved oxygen in the cooling water of seal with hydrazine injection can prevent leakage problems of mechanical seal in feed water pump.

• Tribology and Lubricants
• /
• v.3 no.1
• /
• pp.12-17
• /
• 1987

밀봉장치는 밀봉요소 또는 시일(seal)이라 불리우며, 서로 접촉한 부분 사이에서 유체의 누설방지 및 이물질의 침입방지에 이용되고 있다. 밀봉면에 거시적인 상대운동이 있는가 없는가에 따라 동적요소와 정적요소로 분리된다. 동적밀봉요소를 운동용 시일 또는 패킹(packing)이라하고 크게 접촉형과 비접촉형으로 분리된다. 정적밀봉요소를 정지용 또는 고정용 시일이라하며 가스켓(gasket)이라고도 한다. 오일 시일의 일반적인 사항에 대해 설명하였다. 사용기기의 고속, 고성능화에 다라 오일 시일의 사용조건이 점점 가혹하게 되고 있으므로 신뢰성과 안정성에 대한 요구도 증가하고 있다. 특히 트러블 원인은 살펴보면 취급법이나 축에 기인하는 초기 고장이 많으므로, 사용조건에 적당한 오일 시일을 선정하고 올바른 사용 방법을 지키므로서 초기 고장을 대폭 감소시킬 수 있다. 보다 전문적인 내용들은 관련 문헌을 참조바란다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.352.2-352
• /
• 2001

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.108-109
• /
• 1998

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.1
• /
• pp.50-53
• /
• 1999

In this paper, the mechanical movement of lip seal-ring which plays the most important function in stern-tube sealing system and the possibility of leakage caused by pressure fluctuation are studied by theory and experiment. By the finite element method for axial symmetry object which receives the torsional bending load, the displacement and stress analysis of the seal-rings are executed for products of several representative manufacturers of seal-rings, and also the possibility of crack occurance are checked by theoretical analysis. A sample seal-ring id designed and manufactured using the program of displacement and stress analysis developed in this study and made an experimental apparatus to test the sampling seal-ring. The sampling seal-ring functioned excellently, but it had its durability and this problem may be solved by using the Viton instead of NBR.

• Tribology and Lubricants
• /
• v.10 no.3
• /
• pp.12-17
• /
• 1994

Minimum clearance between the U-cup seal groove of a piston and a cylinder bore to ensure against extrusion of the U-cup ring and leakage of working fluids is an important design parameter for a seal designer in hydraulic cylinder applications. Therefore, typical U-cup seal of a hydraulic actuator has been analyzed as a function of a sealing gap using the nonlinear FEM software MARC. In this study, the useful design data were presented as a function of the sealing gap and the sealed hydraulic pressure.