• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.49-54
• /
• 2010

The cryogenic ball milling was performed on carbon nanotubes (CNTs) at an extremely low temperature to increase the dispersion of CNTs. The effects of milling speed and time on the deagglomeration and structural changes of CNTs were studied. FESEM was used to analyze the dispersion and the change of particle size before and after milling process. Transmission electron microscopic (TEM) analysis was also investigated the effect of cryogenic ball milling on the morphological characteristics of CNTs. The structural changes by the cryogenic ball milling process were further confirmed by x-ray diffraction (XRD) and Raman spectroscopic analysis. The results showed that the agglomeration of CNTs was significantly reduced and amorphous structure was observed at high milling speed. However, the milling time has no great effect on the dispersion property and structural change of CNTs compared with milling speed.

• Composites Research
• /
• v.26 no.2
• /
• pp.111-115
• /
• 2013

Aluminum-based composites containing $C_{60}$-fullerenes are produced by hot rolling of ball-milled powder. The grain size of aluminum is effectively reduced to ~100 nm during ball-milling processes, leading to grain refinement strengthening of the composite. Furthermore, $C_{60}$-fullerenes are gradually dispersed during ball-milling processes and hence the strength of the composite increases with the volume of $C_{60}$-fullerenes. The composite containing 10 vol% $C_{60}$-fullerenes with a grain size of ~ 100 nm exhibits ~1 GPa of compressive strength.

• Journal of the Korean institute of surface engineering
• /
• v.20 no.2
• /
• pp.77-85
• /
• 1987

최근 10년간 공구의 耐마모 코우팅 분야는 급속한 발전을 하여 왔다. 처음에는 초경 합금 인서트를 TiC로 단층 코우팅하였다. 코우팅 효과를 고려함에 따라 TiC, Ti(C,N), TiN으로 코우팅하게 되었고 또한 $Al_2O_3$ 코우팅도 많이 사용하였다. 처음의 코우팅은 공정작업의 어려움으로 극히 어려웠으나, 밀링작업에 대한 코우팅은 발달하여 왔다. 그림1.은 선반가공과 밀링작업을 하기 위한 초경 합금 인서트를 공구지지대로 지지하고 코우팅 한 것이다. 코우팅의 발전은 공구 코우팅과 강의 마모부분에 코우팅 하는 것으로 많이 발전하였다. 현재 CVD방법이 코우팅에 쓰이고 있으며 저온에서 강에 코우팅하는 작업에는 PVD방법을 도입하기에 이르렀고, 공구의 수명은 3~10배 증가하였으며 코우팅의 효과는 아래와 같이 요약된다. 1. 마찰력 감소, 열발생 감소, 절삭력 감소 2. 고속 절삭시 공구의 표면과 칩사이 확산 감소(코우팅은 확산 장벽으로 작용함) 3. 갤링(galling)을 막아줌. 공구의 수명 연장과 여러분야에 사용하기 위한 최적의 요구 조건은 다음과 같다. -공구재와 접촉시 화학적 안정성 -耐 산화성 -耐 마모성 -갤링의 방지 -耐 충격성 耐 열주기 -모재에 대한 코우팅 재의 충분한 접착성.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.384-389
• /
• 2011

We made suspension of fumed silica in polyethylene glycol (PEG), studied rheological behavior as functions of contents of silica, dispersion condition, PEG molecular weight, temperature and contents of humidity. Rheological behavior of suspension was determined critical shear rate and rise of viscosity using rheometer AR2000. Suspension were PEGs of molecular weight 200, 400, and 600. Fumed silica suspensions of which silica contents are 5, 7, 9, 13, and 18% were prepared by normal mixing, homogenization and bead milling process. We observed their rheological behaviors at 10, 20, 30, and $40^{\circ}C$. As the PEG molecular weight and contents of silica increase, the critical shear rate was lowered. As the temperature increased, the critical shear rate was increased. Humidity contents of dispersion don't influence on the critical shear rate, but dispersion processes greatly affect the critical shear rate. The critical shear rate of suspensions prepared by the mixing process was the lowest, and that of suspensions prepared by the bead milling process was the highest. The rise in the shear viscosity of suspensions prepared by the mixing process is higher than that of suspensions prepared by the bead milling process. This was dependent on the dispersion condition of silica particle by dispersion process.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.91-96
• /
• 2021

The enhancement of thermoelectric figure of merit was achieved by the simple processes of sieving and high energy ball milling, respectively, which are enable to reduce the grain size of n-type Bi₂Te₃ thermoelectric materials. By optimizing the grain size, the electrical conductivities and thermal conductivities were controlled. In this study, spark plasma sintering was employed for hindering the grain growth during the sintering process. The thermoelectric figure of merit was measured to be 0.78 in the samples with 30 min high energy ball milling process. Notably, this value was 40 % higher than that of pristine Bi₂Te₃ sample. This result shows the properties of thermoelectric materials can be readily controlled by optimization of grain size via simple ball milling process.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.38-38
• /
• 2003

나노입자는 일반적인 크기의 입자에서 볼 수 없는 특성을 나타내므로 촉매, 광학, 자성기록매체, 자성유체로의 자유로운 응용이 기대되어지고 있으며, 다양한 조성의 나노재료 및 제조공정에 관한 연구개발이 활발히 이루어지고 있는 추세이다. 이중 나노재료제조공정은 기상응축, 열분해법, 플라즈마법 및 볼밀링법 등이 상용화되어 있으며, 본 연구에서는 화학적균일성과 다양한 조성으로의 응용이 용이한 화학기상응축공정을 이용하여 Fe/N나노분말을 제조하였다. 제조된 Fe/N 나노 분말의 분해온도 ($50^{\circ}C$~$1100^{\circ}C$)에 따른 미세조직의 변화를 고분해능전자현미경(HRTEM)을 이용하여 관찰하였다. 그 결과 분해온도에 따라 Amorphous +$\alpha$-Fe nanocrystallites $\rightarrow$ Amorphous +$\alpha$-Fe nanocrystallites + $Fe_3N$ nanocrystallites $\rightarrow$ $Fe_3N$ nanocrystallites로 상태변이가 일어났으며, $1100^{\circ}C$의 경우 약 5-6nm크기의 산화막이 형성되어 있으며, 이는 코어두RP의 약 28%를 차지하고 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.777-780
• /
• 2010

피스톤 로드는 자동차의 진동과 충격을 흡수해 주는 현가장치인 쇽옵소버의 주요 부품의 하나로서 쇽옵소버의 성능에 중요한 영향을 주기 때문에 높은 치수정밀도와 표면 매끄러움을 요구한다. 피스톤 로드의 생산공정은 원자재 입고 및 적재$\rightarrow$절단$\rightarrow$열처리$\rightarrow$선삭$\rightarrow$홈가공$\rightarrow$밀링$\rightarrow$전조$\rightarrow$검사 및 포장 순으로 작업이 진행된다. 생산공장에서는 하루 평균 1만5천개 정도의 피스톤 로드를 생산하고 있기 때문에 사이클 타임을 줄이고 생산의 효율성을 향상시키기 위해 자동화가 필요하다. 본 연구에서는 피스톤 로드의 생산공정중에서 검사공정과 피스톤 로드에 나사산을 만드는 전조 공정후에 가공부품을 넘겨주는 수작업 공정을 성력화하고 사이클 타임을 획기적으로 줄일 수 있는 자동화시스템 구축 방안을 제시한다. 이를 위해 검사 및 이송장치에 대한 세부적인 검사장치, 정렬장치, 이송장치, 적재장치에 대한 세부 설계 방안과 모델링 수행 결과를 분석하고 제시한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.189-189
• /
• 2004

본 논문은 CNC 밀링머신을 이용한 절삭가공 등 2축시스템의 위치제어 시스템을 대상으로 한다. 기존의 제어방식은 크게 독립축제어와 상호결합제어로 분류할 수 있다. 독립축제어는 두 축의 통합된 운동을 각각의 독립된 축에 대한 추적제어를 수행하여 원하는 공구경로의 위치 정밀성을 향상시키고자 하는 것이고, 상호결합제어는 지령경로에 대한 추적성능보다는 현재의 윤곽오차를 감소시키는 방향으로 제어입력을 인가하여 가공윤곽의 오차를 감소시키는데 주목적이 있다. 또한 최근의 작업공정의 고속화 경향은 윤곽오차를 감소시키면서도 추적성능이 우수한 제어방식을 요구하고 있다.(중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.590-597
• /
• 1985

A recursive geometric adaptive control method to compensate for machining straightness error in the finished surface due to tool deflection and guideway error generated by end milling process is developed. The relationship between the tool deflection and the feedrate is modeled by a modified Taylor's tool life equation. Without a priori knowledge on the variations off cutting parameters, time varying parameters are then estimated by an exponentially windowed recursive least squares method with only post-process measurements of the straightness error. The location error is controlled by shifting the milling bed in the direction perpendicular to the finished surface and adding a certain amount of feedrate with respect to the tool deflection model before cutting. The waviness error is compensated by adjusting the feedrate during machining. Experimental results show that location error is controlled within a range of fixturing error of the bed on the guideway and that about 60% reduction in the waviness error can be achieved within a few steps of parameter adaption under wide operating ranges of cutting conditions even if the parameters do not converge to fixed values.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.79-86
• /
• 2002

In end milling process the undeformed chip thickness and the cutting force components vary periodically with phase change of the tool. In this study, up end milling process is transformed to the equivalent oblique cutting. The varying undeformed chip thickness and the cutting force components in end milling process are replaced with the equivalent average ones. Then it can be possible to analyze the chip-tool friction and shear process in the shear plane of the end milling process by the equivalent oblique cutting system. According to this analysis, when cutting Inconel 718, 61, 64 and 55% of the total energy is consumed in the shear process with the helix angle 30$^{\circ}$, 40$^{\circ}$ and 50$^{\circ}$ respectively, and the balance is consumed in the friction process. With the helix angle of 40$^{\circ}$ the specific cutting energy consumed is smaller than with the helix angle 30$^{\circ}$ and 50$^{\circ}$.