• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1997

In the digital mapping for data base contruction, the positional information is used as an important tool in LIS/GIS(Land Information System/Geographic Information System) that is used for a facility management, urban/cadastral management as well as in spatial analysis. In this paper, for an error analysis of X, Y coordinates data on digital map, test area was classified by topography, density, and slope. The coordinates on topographic map were assumed as true values and they were compared with the coordinates on digital map. A result of the numerical test show that a vector data of line type had more gross error than vector data of polygon type. And, SME(stanadrd mean error) of urban or intermountain area had small values compared to that of suburban area in topography analysis. The SME of dense and middle zone had small values compared to that of loose zone in density analysis. In another slope analysis. the SME of steep of gentle slope had small values compared to that of flatland.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.83-91
• /
• 2012

Crown density, which is defined as the proportion of the forest floor concealed by tree crown, is important and useful information in various fields. Previous methods of measuring crown density have estimated crown density by interpreting aerial photographs or through a ground survey. These are time-consuming, labor-intensive, expensive and inconsistent approaches, as they involve a great deal of subjectivity and rely on the experience of the interpreter. In this study, the crown density of a forest in Korea was estimated using KOMPSAT-2 high-resolution satellite images. Using the image segmentation technique and stand information of the digital forest map, the forest area was divided into zones. The crown density for each segment was determined using the discriminant analysis method and the forest ratio method. The results showed that the accuracy of the discriminant analysis method was about 60%, while the accuracy of the forest ratio method was about 85%. The probability of extraction of candidate to update was verified by comparing the result with the digital forest map.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.75-82
• /
• 2002

A robust signal transition density propagation method for a zero delay model is presented to obtain the signal transition density for estimating the power consumption. The power estimation for the zero delay model is a proper criteria for the lower boundary of power consumption. Since the input characteristics are generally unknown at design stage, robust estimation for wide range input characteristics is very important for the power consumption. In this paper, a conventional transition estimation method will be explored. And this exploration will be analyzed with the input/output signal transition behavior and used to propose the robust signal transition density propagation for the power estimation. In order to apply to practical circuits, the reconvergent path, which is crucial to affect the exactness of the power estimation, will be studied and an algorithm to take the reconvergent path into consideration will be presented. In experiment, the proposed methodology shows better robustness, comparable accuracy and elapsed time compared to the conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.552-559
• /
• 2013

In this paper, the multiple-input multiple-output (MIMO) system with a precoder is considered in the transmit-correlated Rayleigh channels. We specifically target the MIMO system employing the minimum mean square error receivers. Based on random matrix theory, we first present a direct and generalized formulation for deriving a probability density function (PDF) of the signal-to-interference-plus-noise ratio (SINR). Then, we derive the accurate closed-form SINR PDFs for a small number of transmit and receive antennas. Based on the SINR PDFs, tight closed-form approximations of the symbol error rate (SER) are derived. Our analysis suggests that the SER approximations can be used to accurately estimate the error probabilities or as a useful tool for the system design.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.350-363
• /
• 2006

Recently, the micro end-milling processing is demanded the high-precise technique with good surface roughness and rapid time in milli-structure parts, micro machine parts and molding industry. The cutting conditions of micro end-milling has an effect on surface roughness of cutting surface. Therefore this study was carried out to cut stainless steel using high revolution air bearing spindle and micro end-mill and analyze the cutting condition to get the optimum surface roughness by design of experiment. From this study, surface roughness have an much effect according to priority on depth of cut, revolution of spindle and feed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.4-4
• /
• 2021

하도 식생은 하천의 지형변화에 많은 영향을 준다. 식생밀도가 증가하면, 하안의 안정성이 증가하고 하안침식이 감소하며, 사주의 형상과 거동에 영향을 준다. 특히, 사주의 이동은 저수로의 변화에 영향을 주다. 따라서 본 연구에서는 식생하도에서 사주의 이동과 사행의 발달과정을 실내실험과 수치모의를 통하여 분석하였다. 하안의 안정성은 홍수터의 하도식생의 밀도에 영향을 받게 된다. 하안의 안정성을 변화시키기 위하여 실제 식생인 알팔파 밀도를 조절하여 성장시켰다. 초기에 하안침식이 발생하고, 하폭이 증가하였다. 시간이 증가하면서 상류에서 교호사주 발생하고, 하류로 이동하면서 선택적으로 하안이 침식하였다. 시간이 증가함에 따라, 하폭은 증가하고 사주의 이동속도는 감소하며 사주의 파장도 증가하였다. 홍수터 식생이 없는 조건에서는 하안침식이 빠르고 사행의 발달이 크지 않았다. 그러나 식생 밀도가 증가함에 따라, 하안에서 부분 침식이 발달하였다. 식생이 없는 조건에서는 곡률반경 대 하폭의 비인 무차원곡률반경과 하안침식속도에 영향을 주지 않지만, 식생의 밀도가 증가함에 따라, 무차원곡률반경과 하안침식속도가 증가하였다. 사주의 이동이 정지됨에 따라, 식생이 없는 조건에서는 사행의 만곡부에서 저수로의 폭이 크지만, 홍수터 식생이 있는 조건에서는 저수로의 폭이 일정하게 유지된 상태로 사행이 발달하였다. 이는 식생 식생이 없는 조건에서 유출되는 유사량은 불규칙하게 배출되었으며, 이는 하안침식과 사주의 이동에 의하여 영향을 받기 때문이다. 그러나 식생이 있는 하도에서 유사유출량은 감소하고 상대적으로 일정하게 배출되었다. 이는 저수로 폭이 일정하게 유지되고 사주의 발달도 크지 않아서 발달한 것으로 판단된다.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.463-474
• /
• 2017

Heterogeneous background fractures of granite and sedimentary rocks in Gyeongju LILW (low-intermediate level radioactive waste) facility area have been characterized quantitatively by analyzing fracture parameters (orientation, intensity, and size). Surface geological survey, electrical resistivity survey, and acoustic televiewer log data were used to characterize the heterogeneity of background fractures. Bootstrap method was applied to represent spatial anisotropy of variably oriented background fractures in the study area. As a result, the fracture intensity was correlated to the inverse distance from the faults weighted by nearest fault size and the mean value of electrical resistivity and the average volumetric fracture intensity ($P_{32}$) was estimated as $3.1m^2/m^3$. Size (or equivalent radius) of the background fractures ranged from 1.5 m to 86 m and followed to power-law distribution based on the fractal property of fracture size, using fractures measured on underground silos and identified surface faults.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.711-716
• /
• 2003

This paper proposes the method to select the number of optimal mixtures in each state in Continuous Density HMM (Hidden Markov Models), Previously, researchers used the same number of mixture components in each state of HMM regardless spectral characteristic of speaker, To model each speaker as accurately as possible, we propose to use a different number of mixture components for each state, Selection of mixture components considered the probability value of mixture by each state that affects much parameter estimation of continuous density HMM, Also, we use PCA (principal component analysis) to reduce the correlation and obtain the system' stability when it is reduced the number of mixture components, We experiment it when the proposed method used average 10% small mixture components than the conventional HMM, When experiment result is only applied selection of mixture components, the proposed method could get the similar performance, When we used principal component analysis, the feature vector of the 16 order could get the performance decrease of average 0,35% and the 25 order performance improvement of average 0.65%.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.279-284
• /
• 2010

This paper surveys basic research for data base system of the fabric structural design. For this purpose, the weave density coefficients of the worsted and cotton fabrics are analysed and discussed with cover factors suggested by Prof. Walz and Picanol company. And the relationship between weave density coefficients and cover factors of the worsted and cotton woven fabrics was analysed and discussed with weave pattern and yarn count. Finally, the process shrinkages of dyeing and finishing processes according to the weave density coefficients of the worsted and cotton fabrics were analysed and discussed as a preliminary study for the data base system of the fabric structural design. As a result, the density coefficients, K values of the worsted and cotton fabrics were ranged from 600 to 1000, and the weave density coefficients of those fabrics are ranged from 0.4 to 0.8 and from 0.2 to 1.0, respectively. The finishing shrinkages for the worsted fabrics are ranged from 2% to 10%, and for cotton fabrics, it was from 2% to 20%. The weave density coefficients of the worsted and cotton fabrics could be distributed according to the looms, weave pattern and weaving and finishing shrinkages as a concept of the data base for the fabric structural design.

• Food Science and Preservation
• /
• v.6 no.2
• /
• pp.167-172
• /
• 1999

The noodle making characteristics were investigated for both eleven varities of Korean wheat, such as Chokwangmil, Geurumil, Eunpamil, Tnpdongmil, Woorimil, Oigeurmil, Alchanmil, Cobunmil, Geumgangmil, Seodunmil and Suwon 265, and two varieties of imported wheat, DNS(Dark Northern Spring Wheat) and ASW(Australian Standard White). After cooking of dry-noodle, the elasticities were 0.59-0.79 in the native wheat and 0.55-0.57 in the imported wheat. Among the varieties showing the highest value in the various texture properties of cooked dry-noodle, Alchanmil was highest in gumminess, Geungangmil in cohesiveness, Olgeurumil in adhesiveness, Geurumil in fimmess, Chokwang in chewiness, Tapdongmil in tensile strength Gobunmil in breaking strength. After cooking the wet-noodle, Tapdongmil in elasticity, Geurumil in adhesiveness, Geumgangmil in gumminess, cohesiveness, firmness and chewiness, and Suwon 265 in tensile strength showed the highest values in the respective textural properties. From the sensory evaluation of the cooked dry-noodle, the significant differences (p<0.05) among wheat varieties were observed in color, texture and overall quality. As a result, ASW was excellent in our all qualities of cooked dry-noodle followed by Tapdongmil, Alchanmil and Geumgangmil. The cooked wet-noodle also showed the high sensory scores (p<0.01) were showing the best in Tapdongmil, followed by Eunpamil, Geumgangmil and Woorimil.