Compared to gaeous hydrogen, liquid hydrogen has approximately 1/800 volume, 800 times higher volumetric energy density at the same pressure, and the advantage of lower explosion risk and easier transportation than gaseous hydrogen. However, hydrogen liquefaction requires larger scale facility investment than simple compression storage method. Therefore, the research on energy-saving hydrogen liquefaction processes is highly necessary. In this study, helium/neon (mole ratio 80 : 20) refrigeration cycle was investigated as the main refrigeration process for hydrogen liquefaction. Process simulation for less energy consumption were carried out using PRO/II with PROVISION V10.2 of AVEVA. For hydrogen liquefaction, energy consumption was compared in three cases: Using a helium/neon refrigerant cycle, a SMR+helium/neon refrigerant cycle, and a C3-MR+helium/neon refrigerant cycle. As a result, the total power consumptions of compressors required to liquefy 1 kg of hydrogen are 16.3, 7.03 and 6.64 kWh, respectively. Therefore, it can be deduced that energy usage is greatly reduced in the hydrogen liquefaction process when the pre-cooling is performed using the SMR process or the C3MR process, which have already been commercialized, rather than using only the helium/neon refrigeration cycle for the hydrogen liquefaction process.
Compare to the gaseous hydrogen, liquid hydrogen has various advantages: easy to transport, high energy density, and low risk of explosion. However, the hydrogen liquefaction process is highly energy intensive because it requires lots of energy for refrigeration. On the other hand, the cold energy of the liquefied natural gas (LNG) is wasted during the regasification. It means there are opportunities to improve the energy efficiency of the hydrogen liquefaction process by recovering wasted LNG cold energy. In addition, hydrogen production by natural gas reforming is one of the most economical ways, thus LNG can be used as a raw material for hydrogen production. In this study, a novel hydrogen production and liquefaction process is proposed by using LNG as a raw material as well as a cold source. To develop this process, the hydrogen liquefaction process using hydrocarbon mixed refrigerant and the helium-neon refrigerant is selected as a base case design. The proposed design is developed by applying LNG as a cold source for the hydrogen precooling. The performance of the proposed process is analyzed in terms of energy consumption and exergy efficiency, and it is compared with the base case design. As the result, the proposed design shows 17.9% of energy reduction and 11.2% of exergy efficiency improvement compare to the base case design.
Yang, In;Park, Dae-Hak;Choi, Won-Sil;Oh, Sei Chang;Ahn, Dong-uk;Han, Gyu-Seong;Oh, Seung Won
Korean Chemical Engineering Research
/
v.56
no.4
/
pp.577-584
/
2018
This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a partial substitute of wood fiber in the production of wood-based fiberboard. Keratin-type protein constituted the majority of CF, and its appearance did not differ from that of wood fiber. When the formaldehyde (HCHO) adsorptivities of CF compared by its pretreatment type, feather meal (FM), which was pretreated CF with high temperature and pressure and then grounded, showed the highest HCHO adsorptivity. In addition, there was no difference between the adsorbed HCHO amounts, which was measured by dinitrophenylhydrazine method, of scissors-chopped CF and CF beated with an electrical blender. Mechanical properties and HCHO emission of medium-density fiberboards (MDF), which were fabricated with wood fiber and 5 wt% CF, beated CF or FM based on the oven-dried weight of wood fiber, were not influenced by the pretreatment type of CF. However, when the values compared with those of MDF made with just wood fiber, thickness swelling and HCHO emission of the MDF were improved greatly with the addition of CF, beated CF or FM. Based on the results, it might be possible to produce MDF with improved dimensional stability and low HCHO emission if CF, beated CF or FM is added partially as a substitute of wood fiber in the manufacturing process of MDF produced with the conventional urea-formaldehyde resin of $E_1$ grade. However, the use of CF or FM in the production of MDF has a low economic feasibility at the current situation due to the securing difficulty and high cost of CF. In order to enhance the economic feasibility, it requires to use CF produced at small to medium-sized chicken meat plants. More importantly, it is considered that the technology developed from this research has a great potential to make provision for the prohibition of animal-based feed and to dispose environmentally avian influenza-infected poultry.
Journal of the Korean Regional Science Association
/
v.39
no.1
/
pp.53-66
/
2023
Due to COVID-19, the external activities of urban residents have greatly shrunk, causing a lot of damage to the commercial district, such as a decrease in population and sales. The downturn in commercial districts means the collapse of the infrastructure of the national economy, and can have serious side effects on the local economy and individual lives. Therefore, it is necessary to look at the alley commercial area, which is closely related to the national local economy, and pay attention to the damage and stagnation of the alley commercial area where small business owners are concentrated. The purpose of this study is to classify alley commercial districts into growth commercial districts and decline commercial districts by using commercial sales time series data and DTW time series group analysis for the pre- and post-COVID-19 period. The main findings of the study are as follows. First, using the time series data on commercial sales before and after COVID-19, the alley commercial districts were divided into growth commercial districts and decline commercial districts, and it was confirmed that the distribution of growth commercial districts and decline commercial districts was regionally different. Therefore, it is necessary to actively manage commercial districts in areas where many declining commercial districts are distributed, and it is required to prepare policies for each region in consideration of the spatial distribution of declining commercial districts. Second, during the COVID-19 period, face-to-face essential industries, density of guest facilities, and population density negatively affected the sustainability of commercial districts, which is the opposite of previous studies. This is the result of empirically confirming the specificity of the COVID-19 period and the negative effects of the integrated economy, and can be used as basic data for effective commercial district management and policy preparation in the event of a national disaster in the future. Third, the characteristics of the background of the commercial district had a significant effect on the sustainability of the commercial district, and the negative effect of the attracting facilities inducing population concentration in the background area was found. This suggests that it is necessary to consider the characteristics of the background as well as the inside of the commercial district when establishing policies to revitalize the commercial district and support small business owners in a national disaster situation.
Park, Bueyong;Kim, Min-Jung;Lee, Sang-Ku;Kim, Gil-Hah
Korean journal of applied entomology
/
v.58
no.4
/
pp.291-297
/
2019
Since Metcalfa pruinosa was first reported in Koera, it has continually caused damage to sweet persimmon orchard in southern part of Korea. Metcafa pruinosa exist not only in farmland but also in forest areas, and are difficult to control due to the influx of individuals from near forest. M. pruinosa has been occurred in orchard and its surroundings because of various host range. Thus, it has been difficult to decide spatial range and control time for efficient management. In this study, occurrence and dispersal pattern of M. pruinosa in persimmon orchard were surveyed using clear sticky traps, and spatial patterns were analyzed with SADIE(Spatial Analysis by Distance IndicEs), based on location information at sticky traps. Spatial association between survey time was also analyzed to identify when the spatial pattern changed. In sweet persimmon orchard, M. pruinosa mainly dispersed in mid to late May, when the first instar hatches, and in August, emerging season of adult. The first instar nymphs hatched in mid-May were randomly distributed in orchard, but distribution was changed to aggregative pattern after dispersed surroundings of orchard. Adults showed random distribution pattern after immigration to orchard again. These tendency was also observed in density change at orchard and its surroundings, and matched to actual density of M. pruinosa in sweet persimmon trees.
This study seeks to clarify the background and factors for the expansion of bus networks that connect Incheon International Airport with its hinterlands. For this research objective, this paper analyzes the relationships among the change of bus routes, competitive transportation modes, passenger fares, and the shortest time distance. Previously, the hinterlands of route bus networks that connect Gimpo International Airport were Seoul metropolitan area, Chungcheong region, Jeonju and Iksan in Jeollabuk-do(province). However, the opening of Incheon International Airport resulted in the expansion of the hinterlands of bus networks to Gangwon-do, Gwangju, and major cities in Youngnam region. Simultaneously, route bus networks also expanded in Seoul metropolitan area. Each bus route connecting Incheon International Airport with its hinterlands was opened by a single bus company or various bus companies. In many cases, due to the uncertainty of revenues or bus company's regional ties, a bus route was opened by various bus companies. In this paper, the analysis of the number of one-way route bus service and density of flight passengers shows that the frequency of the route bus service for Seoul except Gangseo-gu(ward) and for Seoul's satellite cities(Suwon, Seongnam, Anyang, Gunpo, Guri, and Osan) should be decreased. The analysis also shows that the frequency of the route bus services for the other cities, counties(Guns), and wards(gus) should be increased. In Seoul metropolitan area, although route bus fares are more expensive than subway fares, passengers use route bus more frequency than subway because time distance of route bus is shorter than that of subway and subway transfer is inconvenient. In general, outside Seoul metropolitan area, air flight is preferred in the regions that have airports. In contrast, the route bus is preferred in Daegu and other regions that do not have airports.
While the rusty-colored root is common in ginsengs culture and, often results in a severe economic loss, the major factors have not been found. This study was focused on the determination of a potential relationship between rusty root and endophytic bacteria. The number of endophytes was $9.6\;{\times}\;10^1{\sim}1.5\;{\times}\;10^2\;cfu/g$ fw in normal ginseng roots compared to $3.7\;{\times}\;10^6{\sim}5.1\;{\times}\;10^7\;cfu/g$ fw in rusty ones. Of 31 isolates from rusty ginseng roots, twenty-four isolates repeatedly induced severe to moderate rust on root while seven isolates induced slight rust. The bacteria responsible for rusty ginseng roots were mainly Gram negative aerobic. Rust inducing bacteria were identified as Agrobacterium tumefaciens, A. rhizogenes, Burkholderia phenazinium, Ensifer adharens, Lysobacter gummosus, Microbacterium luteolum, M. oxydans, Pseudomonas marginalis, P. veronii, Pseudomonas sp., Rhizobium leguminosarum, R. tropica, Rhodococcus erythropolis, Rh. globerulus, Variovorax paradoxus on the basis of bacteriological characters and 16S rDNA sequences analysis. The results in this study strongly suggested that the rusty ginseng roots were produced by infection and growth of endophytic bacteria.
This study was conducted to establish a domestic cultivation system of a newly introduced yam bean (Pachyrhizus erosus L.). Growth and yield were investigated in response to various cultural practices, such as seedling raising, planting distance, pinching, and flower pruning. Optimum conditions for raising of seedling were an average temperature of $22^{\circ}C$ for 30 days. Considering of the raising efficiency and the convenience of transplanting, 128 cells per tray was a suitable size. When pinching at a height of 120 cm from late July to early August, yield increased by 22% compared to no pinching. Flower pruning between late August and early September increased the number of tubers and tuber yield by 32% in comparison with no flower pruning. Yam bean seedlings planted at $50cm{\times}30cm$ spacing resulted in 30% yield increase as compared to wider spacing of $100cm{\times}30cm$. Our results thus suggested that the optimal combination of cultural practices ($50{\times}30cm$ planting distance, pinching at 120 cm height, and one time of flower pruning) increase profitability by 107%. All these results suggest high possibility of yam bean as a new income crop in Korea.
Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
/
v.39
no.6
/
pp.457-467
/
2021
This paper aims to analyze changes in urban space use due to social distancing measures for COVID-19 using de facto population data in Seoul during daytime, which is estimated by Seoul Metropolitan Government and telecommunication company of KT using public big data and LTE signal data. The result of kernel density estimation and spatial autocorrelation analysis shows that the distribution patterns of de facto population in 2019 and 2020 were generally similar. This is a result of showing that the government's social distancing measures enabled a certain level of normal activities while suppressing the spread of COVID-19. However, analyzing de facto population subtracting 2019 from 2020 showed different results at the micro level. De facto population decreased in commercial areas but increased in residential areas. This means that COVID-19 social distancing measures had spatially uneven effect. The results of analyzing the effect of regional, land use, economic, educational, and accessibility characteristics on the changes of de facto population using spatial regression analysis are as follows. The higher the density of commercial facilities, the more businesses subject to regulations and schools and universities that require non-face-to-face classes, the more de facto population decreased. Conversely, it was found that de facto population increased in areas with many houses and parks due to telecommuting.
Under the different conditions of planting density and compound fertilizer level, some agronomic and chemical characteristics of burley tobacco were investigated from 1982 to 1984. Leaf area and dry leaf weight per plant, crop growth rate, relative growth rate and net assimilation rate for 40-60 days after transplanting were higher with increasing plant spacing and fertilizer, but leaf area index was lower with increasing plant spacing. At topping stage, the leaf size was increased with increasing plant spacing and amount of fertilizer applied and the stem diameter was increased by increasing plant spacing. Leaf area, leaf weight per plant and weight per unit leaf area of harvested leaf were higher when plant spacing and fertilizer increased. It was estimated that the optimum plant spacing was 105cm x 34cm and level of com-pound fertilizer (N-P$_2$ O$\sub$5/ -K$_2$O =10-10-20) was 263kg/l0a for high yield. There were trends toward increase the contents of total alkaloid and total nitrogen with increasing plant spacing and fertilizer application. There was significant positive correlation between plant spacing and total nitrogen, and between fertilizer application and total nitrogen. The plant spacing of 105cm x 35 to 40cm and 227.5kg/l0a of fertilizer level may be profitable for farm economy and the low nitrogenous leaf.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.