• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.15-21
• /
• 2000

In this study, the electromagnetic coupling through a narrow slit in the upper wall of a short-ended parallel-plate waveguide(PPW) covered by a dielectric slab with a nearby conducting strip on the slab Is considered for the case that the TEM wave is incident in the PPW. Coupled integral equations whose unknowns are the slit electric field and the induced electric current over the strip are derived and solved numerically by use of the method of moments. From results, it has been observed that most of the incident power can be coupled exterior to the guide by appropriately setting the strip width and position, though the slit is very narrow. In addition, the differences between the radiation phenomena, observed in the cases that the conducting strip and the upper Plate of the PPW form a cavity and that strip behaves like a parasitic element, are discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.550-557
• /
• 2007

We predict a context of various structures by using Bayesian Networks Algorithms, Three-Dimensional Structures Algorithms and Genetic Algorithms. However, these algorithms have unavoidable problems when providing a context-aware service in reality due to a lack of practicality and the delay of process time in real-time environment. As far as context-aware system for specific purpose is concerned, it is very hard to be sure about the accuracy and reliability of prediction. This paper focuses on reasoning and prediction technology which provides a stochastic mechanism for context information by incorporating various context information data. The objective of this paper is to provide optimum services to users by suggesting an intellectual reasoning and prediction based on hierarchical context information. Thus, we propose a design of user location prediction algorithm using sequential matching with n-size flexible window scheme by taking user's habit or behavior into consideration. This algorithm improves average 5.10% than traditional algorithms in the accuracy and reliability of prediction using the Flexible Window Scheme.

• School Mathematics
• /
• v.5 no.3
• /
• pp.361-384
• /
• 2003

The purpose of this study was to investigate students' problem solving process based on the model of IDEAL if they learn to solve word problems of simultaneous linear equations through structure-representation instruction. The problem solving model of IDEAL is followed by stages; identifying problems(I), defining problems(D), exploring alternative approaches(E), acting on a plan(A). 160 second-grade students of middle schools participated in a study was classified into those of (a) a control group receiving no explicit instruction of structure-representation in word problem solving, and (b) a group receiving structure-representation instruction followed by IDEAL. As a result of this study, a structure-representation instruction improved word-problem solving performance and the students taught by the structure-representation approach discriminate more sharply equivalent problem, isomorphic problem and similar problem than the students of a control group. Also, students of the group instructed by structure-representation approach have less errors in understanding contexts and using data, in transferring mathematical symbol from internal learning relation of word problem and in setting up an equation than the students of a control group. Especially, this study shows that the model of direct transformation and the model of structure-schema in students' problem solving process of I and D stages.

• The Mathematical Education
• /
• v.50 no.2
• /
• pp.213-231
• /
• 2011

The purpose of this study is to analyze the 6th graders' understanding of the concepts of variable on various aspects of school algebra. For this purpose, the test of concepts of variable targeting a sixth-grade class was conducted and then two students were selected for in-depth interview. The level of mathematics achievement of the two students was not significantly different but there were differences between them in terms of understanding about the concepts of variable. The results obtained in this study are as follows: First, the students had little basic understanding of the variables and they had many cognitive difficulties with respect to the variables. Second, the students were familiar with only the symbol '${\Box}$' not the other letters nor symbols. Third, students comprehended the variable as generalizers imperfectly. Fourth, the students' skill of operations between letters was below expectations and there was the student who omitted the mathematical sign in letter expressions including the mathematical sign such as x+3. Fifth, the students lacked the ability to reason the patterns inductively and symbolize them using variables. Sixth, in connection with the variables in functional relationships, the students were more familiar with the potential and discrete variation than practical and continuous variation. On the basis of the results, this study gives several implications related to the early algebra education, especially the teaching methods of variables.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.226-226
• /
• 2011

최적 저수지운영을 위한 운영률 도출이나 강우-유출 및 수질 모형의 매개변수 추정 문제처럼 비선형적이고 추정해야할 변수의 수가 많은 경우, 수학적으로 모형화하기에 너무 복잡해서 선형계획법, 비선형계획법, 동적계획법 등을 사용하여 최적해를 구할 수 없는 경우도 있다. 이러한 문제에 대해서는 구조적 진화를 통해 최적해를 구하는 방법들이 사용된다. 일반적으로 미지수의 개수가 많아지면 전역최적해를 찾기가 어려워진다. 전역최적해를 찾는 여러 가지 방법들이 수자원 분야에서는 강우-유출모형의 매개변수를 추정하는데 많이 사용되고 있으며, 특히 유전자 알고리즘, SCE-UA 알고리즘 등 전역최적해를 찾는 메타휴리스틱 방법이 많이 사용되고 있다. 전역최적화 방법을 개발하는 연구자들은 최적화방법의 성능을 평가하기 위해 다양한 검사함수(test function)를 만들어 성능을 평가하고 있다. 본 연구에 사용한 검사함수는 Mishra의 연구(2006a, 2006b)에서 사용한 중요하고 복잡한 검사함수이다. 유전자 알고리즘, SCE-UA 알고리즘, DDS 알고리즘을 검사함수 중 전역해를 찾기 어려운 2 차원 함수 2 가지, 다차원 함수 4 가지 함수에 적용하여 각각의 탐색 성능을 평가하였다. 2차원 함수인 Bukin 함수에 대해서는 모든 최적화 방법이 전역최적해를 찾을 수 없었지만, 유전자 알고리즘이 가장 전역최적해에 가까웠고 다음으로 DDS 알고리즘 순서였다. 지역수렴 영역이 많을 것으로 판단되는 10, 30, 50 차원 Michalewicz 함수에 대해서는 DDS 알고리즘으로 구한 최적해가 전역최적해와 매우 근접하였고 다음으로 SCE-UA 알고리즘, 유전자 알고리즘 순이었다. 지역수렴 영역이 상대적으로 다른 함수보다 넓은 10 차원 Schwefel 함수에 대해서는 DDS 알고리즘으로 구한 최적해가 전역최적해와 거의 근접하였고 유전자 알고리즘과 SCE-UA 알고리즘은 매우 큰 편차를 보였다. 40, 80 차원 Schwefel 함수에 대해서는 3 가지 알고리즘 모두 전역최적해와 편차를 보였지만 DDS 알고리즘에 의한 최적해와 다른 두 알고리즘에 의한 최적해는 1 오더(order) 정도의 차이가 났다. 지역수렴 영역이 큰 Michalewicz 함수와 Schwefel 함수에 대한 결과는 매우 흡사한 결과이다. 이상과 같은 결과로, 유전자 알고리즘은 매개변수의 수가 적을 경우 우수한 탐색성능을 가졌으며, SCE-UA 알고리즘은 Griewank, Rastrigin 함수와 같은 형태인 경우 우수한 성능을 보였다. DDS 알고리즘은 전체적으로 우수한 탐색 능력을 가진 것으로 판단된다. 그러므로 수위구간 영역별 저수지운영률 도출을 위한 적절한 최적화방법으로 DDS 알고리즘을 선정하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.191-197
• /
• 2021

To calculate the induced charge of atoms in molecular dynamics, linear equations for the induced charges need to be solved. As induced charges are determined at each time step, the process involves considerable computational costs. Hence, an efficient method for calculating the induced charge distribution is required when analyzing large systems. This paper introduces the Uzawa method for solving saddle point problems, which occur in linear systems, for the solution of the Lagrange equation with constraints. We apply the accelerated Uzawa algorithm, which reduces computational costs noticeably using the Schur complement and preconditioned conjugate gradient methods, in order to overcome the drawback of the Uzawa parameter, which affects the convergence speed, and increase the efficiency of the matrix operation. Numerical models of molecular dynamics in which two gold nanoparticles are placed under external electric fields reveal that the proposed method provides improved results in terms of both convergence and efficiency. The computational cost was reduced by approximately 1/10 compared to that for the Gaussian elimination method, and fast convergence of the conjugate gradient, as compared to the basic Uzawa method, was verified.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.3
• /
• pp.297-309
• /
• 2021

Many game companies are releasing various games based on mobile platforms, and they are using various marketing strategies such as using celebrities to expand their influence on the initial market. This increases the related cost, which makes the continued development of small and medium-sized game companies more difficult. Therefore, this study attempts to understand consumer values according to the type of mobile game marketing and to explore the factors that affect the switching intention of mobile games based on real users of mobile games. As a result of this study, it was found that the playfulness and economics of mobile game marketing have positive effect on the attitudes towards mobile game advertisements and attitudes towards mobile games, but the attractiveness of mobile game marketing using celebrities does not. It was found that attitudes towards mobile game advertisements and attitudes towards mobile games have an influence on the switching intention of mobile games. Through this, we intend to provide useful implications for small and medium game companies to seek effective marketing plans.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.174-183
• /
• 2022

Acoustic radiation from a submerged elastic shell with an internal fluid surrounded by the bubble layer is studied with the modal theory. An omni-directional point source located on the center of the internal fluid is used as acoustic noise source. The unknown coefficients of modal solutions are solved using the interface conditions between media. To preserve the stability of the modal solution over wide frequency ranges, the scaled technique of modal solution is used. The bubble layer is modeled with four kinds of bubble distribution; uni-modal distribution, uniform distribution, normal distribution, and power-law distribution, based on the effective medium theory of Commander and Prosperetti. For each bubble distribution, the insertion losses are mainly calculated for the frequency. In addition, the numerical simulations are performed depending in the bubble void fraction, the material property of elastic shell, and the gap between the bubble layer and the elastic shell.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2A
• /
• pp.155-162
• /
• 2009

This paper deals with the strongest beams with the solid regular polygon cross-section, whose volumes are always held constant. The differential equation of the elastic deflection curve of such beam subjected to the concentrated and trapezoidal distributed loads are derived and solved numerically. The Runge-Kutta method and shooting method are used to integrate the differential equation and to determine the unknown initial boundary condition of the given beam. In the numerical examples, the simple beams are considered as the end constraint and also, the linear, parabolic and sinusoidal tapers are considered as the shape function of cross sectional depth. As the numerical results, the configurations, i.e. section ratios, of the strongest beams are determined by reading the section ratios from the numerical data related with the static behaviors, under which static maximum behaviors become to be minimum.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.3-15
• /
• 2024

Environmental awareness is rising worldwide. however, cement manufacturing facilities use recycled resources to improve raw material and fuel substitution rates, contributing to environmental issues such as waste disposal. The emission of sulfur oxides (SOx), an air pollutant, has been regulated by limestone as raw material in cement manufacturing. However, the impact of increasing use of recycled resources on future facility processes and environmental changes is unclear. Therefore, the cement manufacturing facilities require desulfurization-related technologies and research. In this study, we investigated the applicability of desulfurization technology to cement manufacturing facilities and demonstrated various approaches to applying this technology using byproducts generated in cement manufacturing.