• 제목/요약/키워드: 미시적 분무특성

검색결과 7건 처리시간 0.028초

분사조건에 따른 기체/액체 동축형 인젝터의 분무특성에 관한 연구 (A Study on Characteristics of Gas/Liquid Coaxial Sprays Under Varying Flow Conditions)

  • 정원호;김동준;임지혁;윤영빈
    • 한국항공우주학회지
    • /
    • 제33권1호
    • /
    • pp.54-61
    • /
    • 2005
  • 기체와 액체 추진제를 사용하는 동축형 분사기의 분무특성을 조사하기 위하여 shadow graph와 mechanical patternator, PDPA를 이용한 실험을 수행하였다. 차원해석 방법을 도입하여 운동량 플럭스 비(M)와 레이놀즈 수(Re)를 기체/액체 동축형 분무의 주요 변수로 설정하였고, 실험을 통하여 전단 및 스월 동축형 분무의 특성을 거시적 및 미시적 관점에서 비교분석하였는데, 기체 추진제의 영향력이 커지는 분사조건에서 전단 및 스월 동축형 분무의 거시적 특성이 유사해짐을 확인할 수 있었다. 또한, 본 연구에서는 미시적 분무특성에 대한 분석 결과로서 분무액적 크기와 분사조건 사이의 관계식도 제시하였다.

극초고압 디젤 자유분무의 미시적 분무특성에 관한 연구 (A Study on Microscopic Spray Characteristics of Free Spray of Diesel with Ultra High Pressure)

  • 정대용;이종태
    • 한국자동차공학회논문집
    • /
    • 제13권6호
    • /
    • pp.7-12
    • /
    • 2005
  • In order to analyze the microscopic spray characteristics of free spray in ultra high pressure region, the droplets size and velocity of free spray injected under atmosphere condition were measured by PDPA. As injection pressure became ultra high pressure, the droplets size was decreased continuously due to the increase of mutual reaction between droplets and air. But the decreasing rate became moderate. The velocity was increased until 250 MPa, and then decreased over that of injection pressure. It was seemed that the droplet size was similar in range of $280\~350\;MPa$, but increased in 414 MPa, even though injection pressure was increased. The microscopic spray characteristics of free spray got worse in 414 MPa.

미세버블 디젤 연료의 분사율과 미시적 분무특성에 대한 연구 (Investigation on Injection Rate and Microscopic Spray Characteristics of Fine Bubble Diesel Fuel)

  • 진해론;이승우;김기현
    • 한국분무공학회지
    • /
    • 제25권1호
    • /
    • pp.15-20
    • /
    • 2020
  • This study aims to investigate injection rate and microscopic spray characteristics of diesel fuel containing fine air bubble (FBD). fine bubble was generated by cavitation theory using bubble generator. Fuel spray was injected into constant volume chamber and visualized by high speed camera. The injection rate data was acquired with bosch tube method. Injection rate of finebubble diesel was very similar with that of diesel. It showed slightly faster injection start by 5 ㎲ attributed to the low viscosity characteristics. In microscopic spray visualization, fine bubble diesel spray showed unsymmetric spray shape compared with diesel spray. It also showed very vigorous spray atomization performance during initial spray development. Improved atomization was also attributed to the low viscosity and surface tension of finebubble diesel fuel.

대류유동으로 수직 분사된 과열 와류분무의 분무특성 (Spray Characteristics of Superheated Swirl Spray Vertically Introduced into Convective Cross-flow)

  • 이해천;윤웅섭
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.395-398
    • /
    • 2010
  • 감압비등에 의한 미립화는 더 미세한 직경의 액적을 얻을 수 있고, 분무각이 증가하며, 더 좋은 혼합특성을 갖는 다는 점에서 단순 압력식 미립화와 차이가 난다. 감압비등이란 과열된 액체를 포화 압력 이하의 대기 중으로 분사하여 급격한 비등에 의해 이루어지는 미립화이다. 본 연구는 금속 연료를 이용한 추진기관의 산화제인 물 공급기술에 감압비등과정을 이용한 와류분무를 적용시키기 위해 수행됐다. 분열길이와 같은 거시적 특성은 Charge-Couple Device(CCD) 카메라를 이용해 측정하였고, Sauter Mean Diameter(SMD)와 SMD분포와 같은 미시적 특성은 Global Sizing Velocimetry(GSV) 시스템을 이용해 측정했다. 실험은 압력과 온도, 대류 속도를 변화시키며 진행했다.

  • PDF

전단 유동에 의한 스월 제트의 미립화 및 분무특성 향상 (The Advancement of Breakup and Spray Formation by the Swirl Spray Jets in the Low Speed Convective Flow)

  • 정재철;윤웅섭
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.267-274
    • /
    • 2009
  • 아음속 영역의 대류에 평행하게 압력형 스월 제트를 분사시켜 액막 분열 및 액적 크기와 분포를 실험적으로 측정하였다. 대류로 인한 거시적과 미시적인 분무 특성의 영향을 제트 $We_{\iota}$수와 기상에 대한 액상의 운동량 비를 사용하여 광학적인 방법으로 측정하였다. 낮은 제트 $We_{\iota}$수일 때는 제트의 원심력 부족으로 인해 액막을 형성하지 못하고 Rayleigh 제트 분열을 하게 된다. 높은 $We_{\iota}$수에서는 거시적인 분무 특성은 대류의 영향을 거의 받지 않지만 미시적인 분무 특성은 운동량 비가 높을수록 2차 미립화 과정을 통해 대류의 영향을 많이 받았다. 대류는 제트의 분열을 촉진시키고 스월 제트의 분무 특성을 향상하는 것으로 관찰되었다.

  • PDF

분사압력 변이에 따른 70 N급 액체로켓엔진 인젝터의 분무성능특성 (Effects of Injection Pressure on the Spray Performance Characteristics of the 70 N-class Liquid-rocket Engine Injector)

  • 정훈;김종현;김정수;박정;이재원
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2012년도 제38회 춘계학술대회논문집
    • /
    • pp.180-186
    • /
    • 2012
  • 본 연구팀에서 개발 중인 70 N급 액체로켓엔진의 설계성능 검증에 앞서 요소부품인 비충돌형 인젝터에 대한 인수시험 및 수류시험을 수행하였다. 인젝터 오리피스 인수시험 결과 미시적 관점에서의 가공오차가 확인되었으며, 그로 인해 각각의 오리피스에서 발현되는 분무거동에 차이를 보였다. 순간 분무이미지를 통해 액주(혹은 액적) 표면에 나타나는 파동과 유동의 주기적 흘림현상을 관찰하였다.

  • PDF

공기보조 분사기와 고압 선회식 분사기의 특성 비교 - Part II: 미시적 분무특성 (Comparison of Overall Characteristics between an Air-Assisted Fuel Injector and a High-Pressure Swirl Injector- Part II: Microscopic Spray Characteristics)

  • 장창수;최상민
    • 한국자동차공학회논문집
    • /
    • 제8권5호
    • /
    • pp.28-35
    • /
    • 2000
  • As a second part of the comparison study, microscopic features of an air-assisted fuel injector(AAFI) and a high-pressure swirl injector (HPSI) were characterized. They consist of the internal spray structure in terms of fuel mass and drop diameter, the overall atomization performance with respect to operating parameters and the drop size distribution. Large droplets are concentrated in around the head part of a spray field of the HPSI, while in the case of the AAFI, they were distributed in the tail part. Although the AAFI showed the better atomization performance, the feasible ranges of operating parameters such as injection and ambient pressure were found to be wider in the HPSI. Drop size distribution of the AAFI sprays was more dispersed than that of the HPSI. Drop size distribution of the AAFI sprays was more dispersed than that of the HPSI. However, at the well-atomized condition, it appeared to be very uniform.

  • PDF