• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.46-46
• /
• 2010

최근 상압 저온 플라즈마에서 발생되는 UV와 화학적 활성종들을 이용한 체내 조직 분해 처리, 피부 및 혈관 표면 처리, 대기 및 액체 정화 처리 등의 생체 의료적 응용이 활발하게 연구되고 있다. 이러한 플라즈마에서는 처리 대상 외의 생체 조직의 손상을 최소화 할 수 있는 기술이 필요하며, 이 조건이 확보된 상태에서 처리 목표 대상에 따른 플라즈마 특성, 즉 선택적 생성종 제어와 플라즈마 온도를 안정적으로 관리할 수 있어야 한다. 인체 내부 조직에 대하여 유효 활성종 등의 직접적인 작용이 필요할 경우 밀리미터 크기 이하의 미세침습성 플라즈마를 활용하게 된다. 이 경우 방전 특성을 간접적으로만 관측 가능하여 주변 조직과 플라즈마 간의 상호 영향 등이 고려되어야 하므로 직접적인 관측이 가능한 인체 외부에서 발생된 플라즈마에 비해서 더욱 정교한 제어가 필요하다. 본 연구에서는 미세 침습성 플라즈마의 발생 메커니즘 및 특성 분석을 수행하여 척추 디스크 탈출 치료 시술에 활용하기 위한 연구를 수행하였다. 처리 대상 조직으로의 접근 시 주변 조직의 손상을 막기 위하여 수 밀리미터 이하의 미세한 전극을 이용하였으며 전기 전도성을 띄는 인체 내부에서 절연공간의 확보를 위해 전극 표면에서 기포를 발생시켜 플라즈마 방전이 가능한 조건을 확보하였다. 또한 플라즈마 방전이 중단되거나 혹은 갑작스런 열 플라즈마로의 천이로 인해 생체에 심각한 열 손상을 초래하는 현상을 방지하기 위하여 발생 플라즈마와 주변 디스크간의 상호 영향을 통한 플라즈마의 동적인 특성 변화 및 안정적인 플라즈마 발생을 위한 조건을 도출하였다. 이를 실제 임상 실험에 활용한 결과를 소개하고 아울러 차세대 의료용 플라즈마 발생 장치 개발을 위한 플라즈마 학계의 관심을 이끌어 보고자 한다.

• Journal of Applied Biological Chemistry
• /
• v.58 no.1
• /
• pp.65-74
• /
• 2015

X-ray absorption fine structure (XAFS) analysis using X-ray absorption spectroscopy is being applied as a state-of-the-art method in a wide range of disciplines. This review article summarizes the overall procedure of XAFS analysis from the preparation of soil samples to the analysis of data in X-ray absorption near edge structure (XANES) region and extended Xray absorption fine structure (EXAFS) region. The previous studies on application of XANES and EXAFS techniques in environmental soil science field are discussed and classified them according to metal(loid)s (As, Cd, Cu, Ni, Pb, and Zn). A significant number of previous studies of XAFS application in the environmental soil science field have focused on the identification of Pb chemical species in soil. Moreover, XANES and EXAFS techniques have been widely used to investigate the contamination source via identification of metal species. Similarly, these techniques were applied to identify the mechanisms of metal stabilization in soil after application of various amendments, phytoremediation, etc.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.365-374
• /
• 2003

Various deleterious chemicals can be introduced to existing concrete structures from various external sources. The deterioration of concrete by seawater attack is involved in complex processes due to various elements contained in seawater. In the present study, attention was paid to the formation of secondary minerals and characteristics of mineralogical and micro-structural changes involved in concrete deterioration caused by the influence of major seawater composition. The characteristics of deterioration occurred in existing concrete structures was carefully observed and samples were collected at many locations of coastal areas in Busan-Kyungnam. The petrographic, XRD, SEM/EDAX analyses were conducted to determine chemical, mineralogical and micro-structural changes in the aggregate and cement paste of samples. The experimental concrete deteriorations were performed using various chloride solutions (NaCl, CaCl, $MgCl_2$ and $Na_2SO_4$ solution. The experimental results were compared with the observation results in order to determine the effect of major elements in seawater on the deterioration. The alkalies in seawater appear to accelerate alkali-silica reaction (ASR). The gel formed by ASR is alkali-calcium-silica gel which known to cause severe expansion and cracking in concrete. Carbonation causes the formation of abundant less-cementitious calcite and weaken the cement paste. Progressive carbonation significantly affects on the composition and stability of some secondary minerals. Abundant gypsum generally occurs in concretes subjected to significant carbonation, but thaumasite ({$Ca_6/[Si(OH)_6]_2{\cdot}24H_2O$}${\cdot}[(SO_4)_2]{\cdot}[(CO_3))2]$) occurs as ettringite-thaumasite solid solution in concretes subjected to less significant carbonation. Experimentally, ettringite can be transformed to trichloroaluminate or decomposed by chloride ingress under controlled pH conditions. Mg ions in seawater cause cement paste deterioration by forming non-cementitious brucite and magnesium silicate hydrate (MSH).

• Korean Journal of Environmental Biology
• /
• v.25 no.3
• /
• pp.191-196
• /
• 2007

Indoor air differs from outdoor atmosphere since it contains chemical and physical contaminants from building materials. This study deals with the biological effects of volatile organic compounds (VOCs) released from synthetic fiber carpet materials. One group of Tradescantia inflorescence was exposed to VOCs from the carpet sample in the environmental test chamber, while the other inflorescence group was exposed to a TO-14 standard gas mixture (1 ppm) for comparison. After the exposure, VOCs from the carpet were analysed by the desorber/GC/MS method, and micronuclei in the pollen mother cells of Tradescantia were scored under a microscope $({\times}400)$ to evaluate the genotocixicity induced by the exposure to VOCs. The chemical analysis confirmed that a total of 12 VOCs were released from the carpet materials, among which stylene $(71.9{\mu}g\;m^{-3})$ and toluene $(49.6{\mu}g\;m^{-3})$ were in the highest concentration. Twenty four hours of exposure to VOCs from the carpet in the environmental test chamber resulted in a micronucleus frequency as high as $7.73{\pm}0.75MCN$ per 100 tetrads, which was similar to that induced after exposure to the TO-14 standard gas mixture (1 ppm) for 4 hours. Meanwhile, two hours of exposure to the standard gas mixture did not cause a significant increase in the genotoxicity compared to the spontaneous micronucleus frequency. This result indicates that exposure for a long time to the air contaminated with VOCs from the carpet materials causes a genotoxic effect. The biological-chemical combination analyses in the study proved to be an effective tool for monitoring the indoor air contaminants.

• Journal of Chest Surgery
• /
• v.36 no.5
• /
• pp.348-355
• /
• 2003

Background: The prognostic significance of lymph node micrometastasis in non-small cell lung cancer remains controversial. We therefore investigated the clinicopathologic factors related to lymph node micrometastsis and evaluated the clinical relevance of micrometastasis with regard to recurrence. Material and Method: Five hundred six lymph nodes were obtained from 41 patients with stage 1 non-small ceil lung cancer who underwent curative resection between 1994 and 1998. Immunohistochemical staining using anti-cytokeratin Ab was used to detect micrometastasis in these lymph nodes. Result: Micrometastatic tumor cells were identified in pN0 lymph nodes in 14 (34.1%) of 41 patients. The presence of lymph node micrometastasis was not related to any clinicopathoiogic factor (p) 0.05). The recurrence rate was higher in patients with micrometastasis (57.1%) than in those without (37.0%), but the difference was not significant (p=0.22). Patients with micrometastasis had a lower 5-year recurrence-free survival rate (48.2%) than those without micrometastasis (64.1%), with a borderline significance (p=0.11), The S-year recurrence-free survival rate (25.0%) in the patients with 2 or more micrometastatic lymph nodes was significantly lower than that in the patients with no or single micrometastasis (p=0.02). In multivariate analysis, multiple lymph node micromestasis us was a significant independent predictor of recurrence (p=0.028, Risk ratio=3.568). Conclusion: Immunehistochemical anti-cytokeratin staining was a rapid, sensitive, and easy way of detecting lymph node micrometastasis. The presence of lymph node micrometastasis was not significantly associated with the recurrence, but had a tendency toward a poor prognosis in stage 1 non-small cell lung cancer. Especially, the presence of multiple micrometastatic lymph nodes was a significant and independent predictor of recurrence.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.25-34
• /
• 2016

From 1990's, a study on the development of exothermic concrete, a concrete which electro-conductive material is mixed, has been proceeded. However, due to the difficulty of exothermic reproducibility of concrete specimen, the study has been unable to continuously carried out. Accordingly, this study was focused on developing an exothermic concrete for the purpose of snow-melting material. Cement paste and mortar specimens mixed with graphite, conductive metal powder and chemical admixture were made. The evaluation of exothermic performance and reproducibility was conducted under $-2^{\circ}C$ of low temperature. In addition, micro-chemical analysis was carried out to investigate a cause of exothermic reproducibility. As a test result, the specimen mixed with graphite and superplasticizer with air entrained showed the best exothermic performance and reproducibility. Through micro-chemical analysis, it is judged that polymer or methacrylic acid (MAA), the contents inside the superplasticizer with air entrained, gave exothermic reproducibility by generating the electrochemical reaction with graphite.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.213-216
• /
• 2007

PEMFC의 전기화학적 반응은 촉매, 이오노머, 기공이 만나는 삼상계면에서만 일어나므로, 전극 구조의 최적화가 성능 향상 및 장기안정성 확보에 있어 매우 중요하다. 본 연구에서는 전극 미세구조를 실시간으로 분석하기 위해 임피던스 복소캐패시턴스법을 도입하고자 하였다. 즉, PEMFC의 양극에 질소를 공급하면 0.4 V 부근에서 전기이중층 형성 반응만이 일어나는 것을 확인하였으며, 이때 음극에는 수소를 공급하여 기준전극 및 반대전극으로 사용하였다. 측정된 임피던스를 복소캐패시턴스로 변환하고 허수부를 주파수에 대해 도시하면 피크 형태의 곡선이 얻어지는데, (1) 피크 면적은 전극/전해질의 계면면적, (2) 피크 위치는 이오노머 네트워크에 의한 수소이온 전도 특성, (3) 피크 폭은 다공성 구조의 균일도를 각각 나타내므로, 피팅 없이 직접적인 해석이 가능하다는 장점을 가진다. 반면, 기존의 Nyquist 도시법은 피팅에 의한 분석이 필요하며, 전극층의 불균일한 구조로 인해 단순한 등가회로 구성이 어려운 문제점을 가진다. 최종적으로, MEA 제작 조건 및 운전 조건을 변수로 하여 임피던스를 측정하고 복소캐패시턴스 분석을 수행하여, 퇴화 경로를 규명하고 운전 조건을 최적화하고자 하였다.

• Journal of dental hygiene science
• /
• v.11 no.4
• /
• pp.333-337
• /
• 2011

The purpose of this experiment was to examine possibility of microleakage by water, temperature change, and bite force inside the mouth during the period of using light-activated temporary filling materials. 2 kinds of light-activated temporary filling materials were used in order to measure weight and compressive strength and to evaluate microleakage between filling material and cavity wall according to frequency of thermal circulation. First, Light-activated temporary filling material was increased the weight, which was measured according to the period of using. As for the result of comparing between products, the weight of Quicks was indicated to be higher. Second, Compressive strength of Spacer had significant difference depending on period of using. However, significant difference wasn't shown in the compressive strength of Quicks. In Spacer that showed significant difference, the compressive strength increased greatly in the difference of 3 days. Third. As for micro-leakage according to frequency of thermal circulation, the microleakage was indicated to be the highest in the group that carried out 7,000 times. The group with operation of 1,000 times and the group with operation of 3,000 times were indicated the statistically lower micro-leakage than the group with operation of 7,000 times. This study brought about a rise in micro-leakage depending on the passage in the period of using. However, it is obvious fact that micro-leakage increases according to the passage of time after restoration.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.41-41
• /
• 2001

포항가속기의 초고진공 세정기술은 초고진공 영역에서의 기체방출을 최소화하기 위한 것으로 발생한 오염원을 추적하여 큰 오염원 부터 시작하여 단계적으로 진행해 미세한 오염원 을 제거해 나가는 방법을 적용하고 있다. 이러한 극청정한 진공표면을 얻기 위해서는 표면과 오염물질 사이의 결합에너지를 극복해야 한다. 오염물 제거 방법으로는 물리.전기.화학적인 방법을 모두 적용하며 그리스 및 절삭유를 비롯해 흡착된 탄화수소와 불순물 성분 또는 산소나 황과 같은 반응성 원소와의 화합물 등을 효과적으로 제거한다. 또한, 세정 과정 에서 생성될 수 있는 수소, 불규칙한 산화물, 질화물, 염화물, 그리고 탄수화물을 최소화하여 초고진공 영역에 도달할 수 있는 방법을 제공한다. 본 논문에서는 포항가속기 연구소의 초고진공 환경을 확보하기 위한 화학세정 설비 및 응용기술, 주요 진공 구성재료의 표면 분석 결과를 소개하고자 한다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.223-224
• /
• 2003

포장도로에서 발생되는 미세먼지는 주로 자동차의 운행에 의한 직접 배출되는 입자와 도로 표면에서 비산되는 토양입자 그리고 타이어나 브레이크 패드의 마모에 의한 고무 및 석면 둥 다양한 배출원에 의해 발생되는데, 도로 주변의 배출원에 의해 많은 영향을 받을 것으로 판단된다. (최금찬등, 1996) 특히 인천에는 많은 비산먼지 배출원이 산재하여 있어, 이 들 배출원들의 영향이 여타 대도시보다 클 것으로 판단된다. 따라서, 본 연구에서는 인구와 교통량이 많고 공업활동이 활발한 인천지역의 주요 포장도로(H-ADT: High Average Daily Traffic, 5,000대/일 이상인 도로)에서 채취한 silt를 주거지역, 공업지역, 상업지역, 기타지역별로 채취하여 화학적 성분분석을 통해 지역별 특성을 조사하여, 각 지역 별 포장도로에서의 silt의 기원이 무엇인지를 추정하는 기초자료를 구축하고자하였다. (중략)