• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.252-257
• /
• 2019

We investigated the microstructure and morphological characteristics of microplastics added to rinse off cosmetics by scanning electron microscope. The size of the microplastic was in a wide range of sizes, from $250{\mu}m$ to 1.5mm in diameter. The small microplastics were in the shape of elongated particles and the large microplastics were cuboidal. Most cubic microplastics were observed in the form of squares or rectangles. The surface of the cubic microplastic was smoothly observed without protruding portions, but irregularly many gaps were formed. The gap between openings was measured from about $5{\mu}m$ to $20{\mu}m$. It has not been confirmed that these gaps are formed from the surface of the microplastic to the inside there of.

• The Korean Journal of Zoology
• /
• v.35 no.4
• /
• pp.405-413
• /
• 1992

등검은메뚜기(EuprepoceRneTmis shirak시 성충에서 면역작용에 관여하는 혈구로 확인된 Plasmatocvte와 granu10cvte 1 딪 granu10cyte 11의 형태와 미세구조적 특징을 광학현미경과 전자현미경을 이용하여 관찰하였다. Plasmatocyte는 방추형 또는 맡은 세포질돌기를 형성하고 있는 다형의 형태로 세포질에는 리소조옴과 식포가 존재하고 있었고, 식포의 융합에 의해서 형성된 multivesicular body가 관찰되었다. Granulocyte 1은 구형의 형태로 세포질에는 약 0.2-0.3 urn 크기의 과립을 함유하고 있었으며, 특히 원형질막 가장자리에 세포의 골격을 유지하는 미세소관 다발을 갖고 있었다. Granulocyte 11는 난형 또는 방추형의 형태로 세포질에는 약 0.5-0.8 Um의 과립이 세포질의 대부분을 차지하고 있었으며, 세포소기 관은 granu10cyte 1보다 덜 발달되어 있었다.

• Korean Journal of Plant Taxonomy
• /
• v.37 no.3
• /
• pp.255-273
• /
• 2007

The morphological characters for 4 taxa of Korean Symplocaceae were examined. Based on morphological examination, numerical analysis was performed to clarify the taxonomic relationships among the taxa. It was found that epidermal characters of leaves, cellular deposition of petals, cellular boundary of petioles, growth of stigmas and pollen grains and their surfaces were useful diagonostic characters. From the results of PCA analysis, four taxa were grouped as species clusters including each populations. Four species of Symplocos were clustered as species groups with clear delimitation. Morphological, numerical, and palynological analyses supported the previous morphological studies on this family.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.642-647
• /
• 2011

The fabrication characteristics of porous uranium oxide granules from $U_3O_8$ powder was investigated in terms of initial particle bed motions such as slumping and rolling, thermal treatment conditions, and rotational velocities in slumping motion using a rotary voloxidizer. With respect to the initial particle bed motion the recovery rate of granule of above 1 mm in slumping motion was higher than that in the rolling motion. Rolling motion was changed into slumping motion with high slumping frequency by formation of granules from fine particles. Recovery rate of granule significantly increased with the increas in thermal treatment temperature and time of upto 10 h. As the rotational velocity of voloxidizer in the case of the initial particle bed showing slumping motion increased, the recovery rate of granule increased from 81.5 to 88.7%. However, the rotational velocity of 2 rpm provided an effective density, crushing strength and sphericity of granules.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1977.10a
• /
• pp.196.3-196
• /
• 1977

Nocardia sp는 공업폐액의 활성요인로 부터 형태학적으로는 일반세균과 방선균과의 중위위치에 속하는 분류학상 특이한 미생물로서 이의 유녹균으로서는 Corynebacterium, Mycobacterium을 들수있으나 이들과 형태적인 구별은 매우 어렵다. 그러므로 이들 유연균들과 비교하기 위하여 전자현미경에 의한 미세구조를 관찰하였던 바 세포내 unit membrane을 가진 막양구조가 복잡한 형태로 질내에 분포되에 있음을 알았다.(중략)

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.115-119
• /
• 2001

The electrical properties of heavily drawn bundled Cu- Nb filamentary microcomposite wires were examined and correlated with the microstructural changes caused by thermomechanical treatments. The cross sectional shape of Nb filaments in wires fabricated by bundling and drawing appear straight or slightly curved. The different shape of Nb filaments is attributed to the break- up and cylinderization of Nb filaments during the bundling process at high temperatures. The resistivity of Cu-Nb microcomposites is predominantly controlled by electron scattering at Cu-Nb interfaces. The decrease of the conductivity below the annealing temperature of $400^{\circ}C$ is due to the increasing contribution of the scattering associated with coherency strains of needle- shaped precipitates. The slight decrease of the resistivity ratio (${\rho}_{295K}/{\rho}_{75K}$) is also due to the precipitation of Nb atoms. The increase in conductivity in Cu-Nb microcomposites at an annealing temperature of 50$0^{\circ}C$ is due to the coarsening and spheroidization of Nb filaments.

• Annual Conference on Human and Language Technology
• /
• 2022.10a
• /
• pp.324-328
• /
• 2022

기계 독해란 주어진 문서를 이해하고 문서 내의 내용에 대한 질문에 답을 추론하는 연구 분야이며, 기계 독해 문제의 종류 중에는 여러 개의 선택지에서 질문에 대한 답을 선택하는 객관식 형태의 문제가 존재한다. 이러한 자연어 처리 문제를 해결하기 위해 기존 연구에서는 사전학습된 언어 모델을 미세조정하여 사용하는 방법이 널리 활용되고 있으나, 학습 데이터가 부족한 환경에서는 기존의 일반적인 미세조정 방법으로 모델의 성능을 높이는 것이 제한적이며 사전학습된 의미론적인 정보를 충분히 활용하지 못하여 성능 향상에 한계가 있다. 이에 본 연구에서는 기존의 일반적인 미세조정 방법에 템플릿을 적용한 템플릿 기반 미세조정 방법을 통해 사전학습된 의미론적인 정보를 더욱 활용할 수 있도록 한다. 객관식 형태의 기계 독해 문제 중 하나인 토익 문제에 대해 모델을 템플릿 기반 미세조정 방법으로 실험을 진행하여 템플릿이 모델 학습에 어떠한 영향을 주는지 확인하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.211-219
• /
• 2000

The fine structure on the compound eye surface of 6 species belong to 6 genera of Asilinae in Korea was morphologically studied with a scanning electron microscope and image analyser. The compound eye was divided into 3 parts(medial, middle, and lateral) according to a difference in the diameter of a facet which was various form. The fine structure of a facet in Trichomachimus scutellaris(Coquillett) was valuable in taxonomy because it was differ from each species in Asilinae.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.52-58
• /
• 2000

최근 첨단 미세가공기술로 주목을 받고 있는 실리콘 마이크로머시닝 기술과 이를 기반으로 한 산업용 MEMS 개발현황을 소개한다. 전반부에서는 마이크로머시닝 기술의 종류를 소개하고 각각의 기술에 대해 기술근원, 미세가공원리와 기본 가공공정을 간략히 요약한 후 기전 집적형태의 마이크로머신과의 연계성을 고려한 시스템적인 측면에서의 기술특성을 상호 비교한다. 또한 가공의 양산성, 재현성, 조립성 측면에서 마이크로머시닝의 가공성을 조명함과 동시에 향후 발전방향을 전망한다.(중략)

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.243-249
• /
• 2014

We conducted investigations into the morphological characterstics and chemical compositions of the microlites included in the obsidians from the North Korean side Baekdusan (NK) and in the obsidian artefacts from the Busan Gadeokdo prehistoric site (BG). The morphology of the microlites from the NK can be divided into three groups, and trichite-acicular and trichite-asteroidal types are predominant. On the other hand the microlites from the BG show various morphological features such as acicular, margarite, lath, and asteroidal types. Silicate microlites from the NK are mostly of Ca-pyroxene compositions (hedenbergite to augite), whereas those from the BG are mostly of biotite (annite) with small amount of clinopyroxene (ferrosilite). It is well understood that the microlites from the NK are different from those from the BG in terms of the morphology, mineral content and mineral composition. Thus the obsidian aretefacts from the Busan Gadeokdo prehistoric site seem to have no genetical relationship to the obsidians from the Baekdusan.