• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.8-8
• /
• 1992

극미세입자 졸의 코팅시 가장 문제시되는 균열 발생과 재현성 문제를 해결하기 위하여 다양한 졸-겔 코팅법을 시도하였으나 그중 본 연구에서 개발된 가압 졸-겔 코팅법이 최적이었음을 알 수 있었다. 복합분리막에서의 담체상의 박막 코팅과 기공 내부 코팅 정도 및 균열 발생 유무를 일차적으로 SEM 에 의하여 규명하였으며 분리막 튜브 전체에 대한 균열 존재 여부 및 미세구조 특성등은 복합분리막내에서의 N$_2$ 기체투과율 데이타로부터 기체투과 모델을 이용하여 평가 분석하였다.

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.87-87
• /
• 2005

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.863-865
• /
• 2022

본 프로젝트는 시간, 날씨, 미세먼지 농도, 캘린더, 뉴스 등을 포함한 기본적인 생활정보를 스마트 미러에 디스플레이 해주며 추가적으로 구글 어시스턴트를 활용해 음성인식으로 유튜브 재생, 인터넷 검색 등 다양한 기능을 내재하고 있다. 아울러 인체 감지 센서를 이용해 움직임이 감지되지 않으면 절전모드로 동작하다 움직임이 감지하면 일반 모드로 동작한다. 마지막으로 CCTV 기능을 내재하고 있어 CCTV 화면을 웹 애플리케이션을 통해 실시간 스트리밍 하며 사람 얼굴이 감지될 시 화면을 녹화하는 기능을 포함하고 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.132.1-132.1
• /
• 2017

본 연구에서는 투명전극 제조를 목적으로 전기방사법을 이용하여 미세구리 패턴을 형성하는 방법에 대하여 연구하였다. $Ag^+$이온이 용해된 폴리비닐부티랄(PVB) 고분자 용액을 폴리에틸렌 테레프탈레이트(PET)와 같은 투명기판 위에 전기방사 하여 $Ag^+$이온/PVB 복합나노와이어를 제조한 후 이를 UV 조사로 환원하여 선택적으로 촉매를 형성하였다. 이후 연속적인 무전해 구리 도금을 통하여 촉매 위에 미세구리배선을 형성함으로써, 투명전극을 제조하였다. 개발 공정을 통해 제조된 투명전극은 기존 Ag나노와이어 기반 투명전극에서 발생하던 접촉저항에 대한 문제를 해결함으로써 전기적, 광학적 특성이 우수한 차세대 유연 디스플레이에 적용 가능성을 보여주었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.149-150
• /
• 2017

It is known that physical and chemical changes of cement hydrates cause problems in the volume stability of concrete. In order to overcome these problems, there is a growing interest in research on mixing technology of cement-based materials and nanomaterials. Among the nanomaterials, carbon nanotubes (CNTs) are attracting attention due to their excellent mechanical properties. The CNTs are made of cylindrically shaped graphene sheets. According to the number of sheets, single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) are classified. Although the SWCNT has superior mechanical properties, the research using MWCNT is vigorous due to the difficulty of marketability and manufacturing, but the research using SWCNT is insufficient. In this study, we investigate the effect of SWCNT on the formation of hydrate of cement paste by observing the microstructure of broken cement paste after measuring the flexural strength of cement paste with SWCNT dispersion.

• Korean Chemical Engineering Research
• /
• v.62 no.2
• /
• pp.181-190
• /
• 2024

Here, we develop a centrifugal microfluidic reactor with simple, fast, and high-throughput manner for the generation of magnetic Janus micro-adsorbents (MAs). By using the multi-micronozzle consisting of two separate aligned needles and centrifugal tubes, we have synthesized highly monodispersed Prussian blue- and magnetic nanoparticle-laden micro-adsorbents (PB-MNP-MAs). The enhanced cesium (Cs⁺) adsorption was demonstrated by conducting the adsorption isotherm and kinetics experiment which can be contributed to the porous nature of the Ca-alginate networks with a high surface area of embedded PB nanoparticles, resulting to perform rapid adsorption activity within 10 min. After Cs⁺ adsorption process, the as-synthesized PB-MNP-MAs were successfully harvested by introducing the external magnetic fields. Therefore, we believe that our findings can be provided new direction towards the development of advanced functional adsorbents in biological and environmental fields.

• Korean Journal of Materials Research
• /
• v.7 no.2
• /
• pp.140-144
• /
• 1997

The effects of the particle size of precursor powder on the microstructure and Jc of Ag-sheathed Ri-2223 tapes were investigated. The calcined powder with overall composition of $Bi_{1-89}Pb_{0-41}Sr_{2-01}Ca_{2-23}Cu_{3-03}O_{y}$ was milled for various times using planetary ball mill. The transport property of the tapes were found to depend strongly on the particle size of the precursor powder Enhanced reactivity of the milled powder facilitated the formation of 2223 phase and resulted in an increase of Jc. Excessive milling, however, led to the amorphisation of the powder and degraded the electrical property of the tapes.

• Journal of Biomedical Engineering Research
• /
• v.31 no.2
• /
• pp.99-105
• /
• 2010

In order to obtain velocity profile of blood flow with high spatial resolution, a micro PIV technique consisted of a fluorescent microscope, double-pulsed YAG laser, cooled CCD camera was applied to in-vitro blood flow experiment through a micro round tube of a diameter $100{\mu}m$. Velocity distributions of blood flow for rabbit were obtained. The viscosity profiles for shear rate were found at flowing condition. To provide hemorheological characteristics of blood flow, the viscosities for shear rate were evaluated. The viscosity of blood also steeply increase by decreasing shear rate resulting in Non-Newtonian flow, especially in low shear rate region caused by RBC rheological properties. The results show typical characteristics of Non-Newtonian characteristics from the results of velocity profile and viscosity for blood flow. From the inflection points, cell free layer and two-phase flow consisted with plasma and suspensions including RBCs can be separated.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.25-29
• /
• 2012

$TiO_2$ nanotubes are prepared from rutile prticles via an alkaline hydrothermal synthesis and the consequent heat treatment at $300{\sim}500^{\circ}C$. The physical and electrochemical properties of the $TiO_2$ nanotubes are characterized for use as a anode material of rechargeable lithium battery. In particular, the microscale dusts as an impurity component occurred in the purification step after the hydrothermal reaction are completely removed to yield $TiO_2$ nanotube with a higher specific surface area and more obvious crystalline phases. As the annealing temperature increases, the specific surface area is slightly decreased due to some aggregation between the isotropically dispersed nanotubes. Highest initial discharge capacity of 250 mAh $g^{-1}$ is achieved for the $TiO_2$ nanotube annealed at $300^{\circ}C$, whereas the $400^{\circ}C$ $TiO_2$ nanotube shows the superior cycle performance and high-rate capability.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.491-499
• /
• 2010

Heat transfer performance of tube bundles have long been investigated since they were widely used. Most of previous experimental and numerical works for tube bundles were performed with tube diameter in the range of 25~51mm and Reynolds number of $8.000{\leq}Re{\leq}30.000$. Recently, tube bundles with small diameter tube collects interests since the mini-channel tube provides higher compactness. The present work aims to investigate the applicability of previous correlations available in the open literature to the tube bundles with small diameter of 1.5mm and $3.000{\leq}Re{\leq}7.000$. A commercial CFD package was used to analyze the thermal-hydraulic performance of them. The results show that the Zukauskas correlation developed for larger diameter tube and higher Reynolds number are still in good agreement with them within the discrepancy of 4.7%. The analyses also show that the Nuselt number increases with a decrease in the longitudinal pitch.