• Composites Research
• /
• v.32 no.5
• /
• pp.199-205
• /
• 2019

The composite material has the advantage that the fibers can be arranged in a desired direction and can be manufactured in one piece. However, micro voids can be formed due to micro air, moisture or improper curing temperature or pressure, which may cause the deterioration in mechanical strength. In this paper, the composite panels with different thicknesses were made by varying the curing pressure in an autoclave vacuum bag process and their microporosities were evaluated. Microporosity was measured by image analysis method, acid digestion method, and combustion method and their correlation with ultrasonic attenuation coefficient was analyzed. From the test results, it was found that the acid digestion method had the highest accuracy and the lower the curing pressure, the higher the microporosity and the ultrasonic attenuation coefficient. In addition, the microporosity and the ultrasonic attenuation coefficient were increased as the thickness of the composite panel was increased at the same curing pressure.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.45-51
• /
• 2000

지난 세기부터 MEMS 제작 기술을 이용하여 만들어진 시스템들을 의학이나 생물학적인 용도로 응용하기 위한 많은 연구가 활발히 이루어져 왔다. 기술적인 측면에서 이러한 연구들은 MEMS 분야의 초창기에 강조되어 온 표면 및 몸체 미세 가공 기술(surface ＆ bulk micromachining)과 같은 미세 구조물 제작 기술의 발전에 힘입은 바 크다. 그러나 MEMS 기술이 점차 발전되어 오면서, 가공 기술이 고도화되고 미세 시스템의 구조가 점차 복잡해짐에 따라, 많은 연구들이 단순한 가공기술을 넘어 미세 시스템을 조립하고 집적화할 수 있는 기술, 접합 (bonding) 기술, 패키징 (packaging) 기술, 3차원 형상의 제작 기술, 실리콘(silicon)이나 유리(glass)가 아닌 다른 재료를 이용한 미세 가공 기술 등의 개발을 중심으로 이루어지고 있다.(중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.265-265
• /
• 2012

스퍼터링을 이용하여 금속을 코팅하면 대부분 주상정 형태의 미세구조로 성장한다. 금속 코팅층의 미세구조를 코팅공정으로 제어하여 치밀한 구조의 코팅층을 합성하기 위해서 평형(balanced magnetron)과 비평형(unbalanced magnetron) 스퍼터링에 의한 박막 구조 변화를 비교하고, 빗각 증착(oblique angle deposition) 효과가 코팅층의 미세구조에 미치는 영향을 확인하였다. 실험에 사용된 타겟은 6 인치 직경의 알루미늄이었으며 기판은 실리콘 웨이퍼와 냉연강판이 사용되었다. 알루미늄 코팅층은 주사전자현미경으로 미세구조를 관찰하였으며, 미세구조 변화가 내부식 특성에 미치는 영향을 평가하기 위해서 알루미늄이 코팅된 냉연강판의 염수분무 시험을 실시하였다. 빗각 증착에 의한 코팅층 미세구조 변화가 가장 두드러지게 나타났으며, 빗각 증착에 의해서 알루미늄 코팅층이 치밀해지는 현상을 관찰할 수 있었다. 알루미늄이 코팅된 냉연강판을 분석한 결과, 빗각 증착으로 코팅된 알루미늄 코팅층이 두께 약 $3{\mu}m$에서 염수분무 200 시간 후에도 적청이 발생하지 않는 우수한 내식성을 보였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.433-434
• /
• 2008

기존의 실험을 통한 전통적인 생물학의 연구와는 달리, 미세 RNA (microRNA)의 연구에 있어 컴퓨터를 통한 프로그램 개발과 정보기술의 이용은 필수 불가결한 요소가 되었다. 컴퓨터를 바탕으로 한 대부분의 연구는 미세 RNA를 발현하는 유전자와 미세 RNA의 타겟 (target)을 예측하는 두가지 분야로 나누어 이루어지고 있다. 본 연구에서는 미세 RNA의 타겟을 예측하는 프로그램 개발시 이용되는 몇 가지 원칙들과 그 원칙들의 문제점을 서술하며, 현재 인터넷상에서 이용 가능한 프로그램들을 소개한다. 또한 컴퓨터를 통해 예측된 미세 RNA 의 타겟을 실험을 통해 검증하는 방법에 대해 논한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4B
• /
• pp.253-259
• /
• 2012

Wastewater-adapted microalgae such as Chlorella vulgaris AG10032, Ankistrodesmus gracilis SAG278-2 and Scenedesmus quadricauda AG10308 are useful biological resources for recovering biofuel and other bio-based materials from wastewater because of their efficient removals of nitrogen and phosphorus from wastewater and their high fatty acid contents in biomass. Although the concentrations of phosphorus typically vary in wastewater environment, very little is known about the effect of phosphorus concentration, especially phosphorus starvation, on microalgal fatty acid synthesis. This is partially due to the lack of methodological establishment for algal fatty acid analysis. In this study, we compared the analysis performances of microalgal fatty acids by two different methods; one is a non-polar GC (gas chromatography) column based method, which is generally used for microbial fatty acids, and the other is a polar WAX-type GC column method, which is typically used for plant fatty acids. And then, we explored the effect of phosphorus concentration levels on fatty acid production in microalgae cultivated from wastewater. As results, the polar WAX-type column method has better ability to separate poly unsaturated fatty acids (PUFA) including $C_{18:3}$ (linolenic acid), and was found to be more applicable in analyzing fatty acids from wastewater-cultivated microalgae than the non-polar column method. The fatty acid characterization by the WAX-type column method revealed little effect of phosphorus starvation on the quantity and composition of fatty acids from wastewater-cultivated microalgae.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2012

To compare monthly variations of phytoplankton biomass and community composition between in seawater and sediment of the Gomso Bay (tidal flat: approximately 75%), the photosynthetic pigments were analyzed by HPLC every month in 1999 and every two months in 2000. Ambient physical and chemical parameters (temperature, salinity, nutrients, dissolved oxygen, and chemical oxygen demand) were also examined to find the environmental factors controlling structure of phytoplankton community. The temporal and spatial variations of chlorophyll a concentration in seawater were correlated well with the magnitude of freshwater discharge from land. The biomass of microphytobenthos at the surface sediments was lower than that in other regions of the world and 2-3 times lower than phytoplankton biomass integrated in the seawater column. Based on the results of HPLC pigment analysis, fucoxanthin, a marker pigment of diatoms, was the most prominent pigment and highly correlated with chlorophyll a in seawater and sediment of the Gomso Bay. These results suggest that diatoms are the predominant phytoplankton in seawater and sediment of the Gomso Bay. However, the monthly variation of chlorophyll a concentration in seawater at the subtidal zone was not a good correlation with that in sediment of the Gomso Bay. Although pelagic plankton was identified in seawater by microscopic examination, benthic algal species were not found in the seawater. These results suggest that contribution from the suspended microphytobenthos in the tidal flat to the subtidal zone of the Gomso Bay may be low as a food source to the primary consumer in the upper water column of the subtidal zone. Further study needs to elucidate the vertical and horizontal transport magnitude of the suspended microphytobenthos in the tidal flat to the subtidal zone.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.197-203
• /
• 2015

Particulate matter (PM) has emitted in many regions of the world and is causing many health-related problems. Thus reasonable politics and solutions are needed to reduce PM in Seoul. Further it is required to clearly explain the major portions of chemical components contained in $PM_{10}$ to figure out the characteristics of $PM_{10}$, and to develop effective reduction measures in order to decrease the adverse effects of $PM_{10}$. $PM_{10}$ samples were collected in Seoul and analyzed their ions to examine the physical and chemical characteristics of ionic species. Since hydrogen ion ($H^+$) and carbonate ion (${CO_3}^{2-}$)) cannot be analyzed by Ion chromatography (IC), concentrations of $H^+$ and ${CO_3}^{2-}$ were initially estimated by pH and equivalent differences between anions and cations in this study. Starting from the study findings, good combination results for compositional patterns between anions and cations were obtained by applying a mathematical modelling technique that was based on the mass balance principle. The ions in $PM_{10}$ were combined with $H^+$, ${CO_3}^{2-}$, and supplement for $NO_3{^-}$, $Cl^-$ formed such compounds $NH_4Cl$, $NH_4NO_3$, $CaSO_4$, $(NH_4)_2SO_4$, $NaNO_3$, NaCl, $Na_2CO_3$, and $(NH_4)_2CO_3$ in the study area.

• Journal of Marine Life Science
• /
• v.8 no.1
• /
• pp.68-77
• /
• 2023

In this study, we investigated the quantitative distribution of microplastics in the surface seawater at 8 points near the Taean Peninsula using fluorescence staining. The study revealed a detection range of microplastics from 0 to 360.5 particles/l, with an average of 149.7 ± 46.0 particles/l. When classifying the microplastics by size, it was found that particles smaller than 50 ㎛ were dominant, although there were differences at Site 3. Moreover, it was not possible to identify clear correlations when comparing the number of microplastics based on collection area and particle size. Various physical and chemical factors, including plastic material, dynamic ocean conditions (such as currents, wind, waves, tides), geological characteristics (topography, slope), sediment materials including coastal organisms, human activities (fishing, development, tourism), and weather conditions (floods, rainfall), affect the behavior of microplastics. Therefore, future efforts should focus on standardizing quantitative analysis methods and conducting fundamental research on microplastic monitoring, including the analysis of environmental factors.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.178-181
• /
• 2008

다양한 조성을 갖는 $CH_4+CO_2$ 혼합 기체 하이드레이트 샘플의 미세 구조 분석을 위하여 X-ray 회절 방법을 이용하였다. X-ray 회절 분석을 이용할 경우, 하이드레이트로의 전환율과 같은 정성적인 분석뿐 아니라 각 객체별 cage occupancy와 같은 정량적인 분석까지도 가능한 것으로 나타났다. 또한 이렇게 얻어진 X-ray 회절 분석 결과 및 refinement 결과를 $^{13}C$ 고체 NMR 방법과 교차 비교함으로써 측정 결과의 신뢰도를 높이려 하였다. 얻어진 분석 결과는 이후 가스 하이드레이트를 이용한 다양한 연구 분야에서 저장용량 평가 및 객체 점유율과 같은 미세 구조 정보를 얻는 데에 유용하게 사용될 것으로 전망된다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.1-8
• /
• 1998

Clustered microcalcifications on X-ray mammograms are an important sign for early detection of breast cancer. This paper proposes a computer-aided diagnosis method for the detection of clustered microcalcifications and marking their locations on digitized mammograms. The proposed detection method consists of the region of interest (ROI) selection, the film-artifact removal, the surrounding texture analysis method for the detection of clustered microcalcifications, which is based on the second-order histogram in two nested surrounding regions on the current pixel. This paper also describes the effectiveness of the proposed film-artifact removal filter in terms of the classification performance with the receiver operating-characteristics(ROC) analysis. A three-layer backpropagation neural network is employed as a classifier. The appropriate marking for the locations of clustered microcalcifications can be used to alert radiologists to locations of suspicious lesions.