Kim, Youn-Ho;Seon, Jong-Ho;Kang, Seong-Min;Wee, Jung-Hyun;Yoon, Ho-Sung;Choe, Won-Ho;Lee, Jong-Sub;Seo, Mi-Hui
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.37
no.4
/
pp.419-424
/
2009
A Xenon feed system has been developed for a 300 W Hall-effect thruster intended for orbit maintenance of small satellite. The system can store about 2 kg of xenon gas at 150 bar and is capable of controlling the mass flow rate of the gas at 0.5 SCCM resolution. The performance of the system is verified with a laboratory experiment. It is confirmed that the operation of the feed system is successful at a pressure level of $1.0{\times}10^{-6}$ torr in the vacuum chamber.
Proceedings of the Korean Society of Fisheries Technology Conference
/
2000.05a
/
pp.284-285
/
2000
분산된 공기 기포에 의해 고형물을 제거하는 포말분리법은 30 $\mu\textrm{m}$이하의 미세 입자와 용존 고형물을 매우 효율적이면서도 경제적으로 운전을 할 수 있고 연속 운전이 가능하며 역세척이 필요 없다는 장점을 지니고 있다((Clarke and Wilson. 1983). 현재 사용되고 있는 포말분리장치는 공기의 공급방식과 유체과 공기의 접촉방향에 따라 항류 공기구동식(counter current air driven type, CCAD), 고속 폭기식(high speed aeration type, HSA), 벤튜리식(venturi type) 등이 있으나 현재까지 우리나라에서 연구되어 오고있는 포말분리 장치는 공기구동 방식이 전부이다. (중략)
Proceedings of the Optical Society of Korea Conference
/
2000.02a
/
pp.132-133
/
2000
최근, 인터넷 등의 보급으로 인하여 급증하는 다양한 형태의 정보를 효과적으로 전송하기 위하여 파장분할다중화 광통신시스템 (wavelength division multiplexed optical communication system: WDM)이 활발히 개발 및 보급되어 왔다. 가변 광감쇠기는 각 파장별 광신호의 세기를 균일하게 하여 장거리 전송을 가능하게 하는 WDM시스템의 핵심 소자이다. 폴리머 소자는 제작이 간편하고 가격이 저렴할 뿐 만 아니라 다른 소자와의 집적이 용이하고, 열광학 계수가 실리카에 비하여 10배 정도 커서 구동전력을 크게 줄일 수 있는 등의 장점으로 인하여 폴리머 광감쇠기가 활발하게 연구되어 왔다$^{(1)}$ . 본 논문에서는 미세 가공된 멤브레인형$^{(2)}$ 도파로를 이용한 저전력 폴리머 가변 광가쇠기에 관한 것이다. (중략)
Proceedings of the Korean Nuclear Society Conference
/
1996.05d
/
pp.275-282
/
1996
일체형 원자로는 증기발생기 및 가압기를 압력용기 내에 설치한 것으로서 연결배관이 없기 때문에 배관의 파단에 의한 대형 냉각재 상실사고를 근원적으로 배제하고 전체계통을 단순화 시킬 수 있다. 증기발생기는 대부분 관류식으로서 일체식과 모듈식이 사용되고 있다. 본 연구에서는 모듈식 나선형 증기발생기를 사용한 일체형 신형경수로의 예비 개념설계를 수행하였다. 가압기는 원자로 내에 별도의 용기를 설치하는 내장형 자기가압기를 채택하였다. 제어봉 구동장치는 핵분열 반응열을 이용한 원자로 기동을 위하여 반응도를 미세하게 조정하는 것이 가능하고 지진하중과 같은 동하중의 영향을 최소화하기 위하여 원자로용기 외부로의 돌출부분을 최소화하는 설계개념을 채택하였다. 냉각재 펌프는 Canned Motor Pump를 원자로용기 상부에 수직으로 직접 부착하는 개념을 사용하였다.
Journal of the Korean Society for Precision Engineering
/
v.19
no.4
/
pp.161-167
/
2002
For the purpose of applying to micro-actuator, thermal properties and displacement of electrostrictive polyurethane(PU) elastomers have been measured. In order to understand an effect of PU component, crosslinking agent are controlled by 0.5 wt% and 1 wt%. DMPA and anther chain extenders were used. PU sample that chain extenders are DMPA is added NaOH for comprehension of effect of ionic groups. The deposited electrode sire on PU films is equal to acrylic holder size when the displacement was measured. Dynamic response according to frequency, displacement and recovery time according to PU thickness were measured. 1 wt% crosslinking agent contents PU samples have higher displacement and lower recovery time than 0.5 wt% crosslinking agent contents PU. If the PU thickness is increased, the actuating voltage for generating of same displacement is increased, too.
Proceedings of the Korean Society of Precision Engineering Conference
/
2004.05a
/
pp.256-256
/
2004
Micro/Meso 기계적 가공은 기존 MEMS 공정에서 제작할 수 없었던 높은 세장비(aspect ratio)를 가지는 제품을 가공할 수 있을 뿐만 아니라 보다 높은 가공 정밀도를 획득할 수 있다. 따라서, 미소 부품에 대한 마이크로/매소 단위의 미세 절삭 가공을 위해서는 공간적 측면과 에너지 소비, 정밀도 측면에서 효율적인 시스템을 구성하기 위해서 마이크로 머시닝 전용 기계가 요구된다. 이에 본 연구에서는 '마이크로 팩토리' 의 기본 공작기계인 마이크로 선반을 개발하여 초정밀 미소 절삭에 대한 연구를 진행 중에 있다.(중략)
Journal of the Korean Society for Precision Engineering
/
v.19
no.11
/
pp.211-220
/
2002
Optical disk drives read information by replacing a laser beam on the disk track. As information has become larger, the more accurate position control of a laser beam is necessary. In this paper, we report the analysis and fabrication of the micro mirror for optical disk drivers. A coupled simulation of gas flow and structural displacement of the micro mirror using the Finite-Element-Method is applied to this. The mirror was fabricated by using MEMS technology. Especially, the process using the lapping and polishing step after the bonding of the mirror and electrode plates was employed for the Process reliability. The mirror size was 2.5mm${\times}$3mm and it needed about 35V for displacement of 3.2 ${\mu}$.
휴대용 면역진단 시스템을 구현하기 위하여 설계된 공기주입기로 구동되는 랩온어칩 내의 유체 유동을 컴퓨터 시뮬레이션을 통하여 해석하고, 문제점을 보완할 수 있는 구조로 랩온어칩을 재설계하였다. 공기주입기에서 흘러나오는 공기를 이용해 완충액 저장고 내에 있는 완충액을 토출시킬 때 다량의 기포가 발생함을 시뮬레이션 결과를 통해 알 수 있었다. 완충액 저장고의 내부에 계단형 구조를 삽입함으로서 완충액 이송 시 형성되는 기포를 상당히 억제할 수 있었다. 또한 계단형 구조는 유선을 역행 방지판 쪽으로 분산시켜 역행 방지판의 효율을 높일 것이다.
Proceedings of the Korean Powder Metallurgy Institute Conference
/
2001.11a
/
pp.36-36
/
2001
$BaTiO_3$는 현재 전기 전자 부속 산업엣 필수적인 재료로서, multilayer capacitor,positive temperature coefficient(PTC) resistor, grain-boundary battier layer capacitor(GBBLC)등에 쓰이고 있다. $BaTiO_3$의 전기적 특성을 최대화하기 위해서는 미세구조가 최적화 되어야만 하는데 일반적으로 수 마이트로 이내의 작고 균일한 크기의 입자크기가 바람직하다. 그러나 $BaTiO_3$계에서 화학양론의 조성이 정확하게 일치하지 않거나 $La^{3+}$나 $Nb^{5+}$같은 첨가제가 들어가지 않으면 비정상 입자 성장은 자발적으로 일어난다. 그러나 첨가제는 $BaTiO_3$의 강자성 특성에 영향을 주게 되므로 첨가제 없이 비정상 입자 성장을 억제할 수 있는 것이 바람직한 방법이며, 이 것이 본 실험의 목표이다. 본 실험에서는 0.4-mol%-$TiO_2$가 첨가된 $BaTiO_3$ 분말을 디스크 형태로 성형하여 $H_2$ 분위기, 1250에서 5시간동안 열처리한 후, 공기 중, 1300도에서 48시간까지 소결한 후 미세조직을 관찰하였다. 소결 전에 $H_2$ 분위기에서 열처리를 함으로서 초기 입자 크기는 증가하게 되고 이로 인한 계의 성장 구동력 감소로 비정상 입자 성장이 억제되었으며 균일하고 미세한 입자 크기를 가지는$BaTiO_3$ 소결체를 얻을 수 있었다. 또한 비정상이 억제되지 않은 $BaTiO_3$의 유전 특성보다 우수한 유전 특성을 나타내었다. 본 실험을 통해서 첨가제를 사용하지 않고 우수한 유전 특성을 가지는 미세한 균일한 입자의 $BaTiO_3$를 제조하는 새로운 기술을 개발하였다.
Park, Seung-In;Hwang, Jun-Young;Lee, Sang-Ho;Kang, Kyung-Tae;Kang, Hee-Suk;Kang, Shin-Ill
Proceedings of the KSME Conference
/
2007.05a
/
pp.1433-1438
/
2007
Characteristics of a phase change type micro actuator have been studied. The micro actuator has been designed for a micro-pump in an active direct methanol fuel cell(DMFC), consisting of an actuating chamber, a membrane, an electric heater, and a sensor of resistance temperature detector (RTD). In the present study, researches have been focused on the response of the actuator to control algorithm of the heater. The experiments demonstrated that the displacement of the membrane increase with temperature variation which is a function of applied voltage, duty ratio, and operating frequency of heating. The results also showed that operation of the actuator with high voltage at small duty of heating is more efficient than the same power consumption of heating with low voltage at large duty.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.