• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.27-27
• /
• 1997

최근 미사일 추진기관 및 기체 구조재로 사용되는 알루미늄 7175 합금의 형상의 변화와 제조공정 변화에 따른 미세조직 변화에 대하여 고찰하였다. 구조체는 사용처에 따라 Flange Type 또는 Ring Type 등으로 형상이 다양하므로 단조 조건과 제품의 위치에 따라 균일한 물성을 획득하기는 매우 어려운 숙제이다. 본 연구에서는 균일한 물성을 얻기 위한 여러 가지 제조 공정의 변화를 모색하였으며, 제조된 단조재의 미세조직을 통하여 물성과의 연관성을 검토하였다. 적용된 공정은 통상의 열간 단조공정, 아 결정립 미세화공정, 재 결정립 미세화 공정 등이며 단조재의 형상과 동일 부품에서도 부위에 따라 변형량이 다르므로 미세조직의 변화가 다르게 나타났다. 아결정립과 재결정립 미세화 공정은 제품의 형상에 따라 내·외부 결정립이 크기가 크게 변화되었다. 이는 내·외부에 재료에 축적되는 에너지의 양과 외적으로 가해지는 기계적 에너지 및 열적 에너지가 다르기 때문이며, 변형량이 큰 부분의 미세 석출물의 크기가 변형량이 적은 부분의 석출물보다 크게 감소됨은 준안정상이 기계적 에너지가 변형열에 의한 열에너지로 변환됨에 따라 상석출에 영향을 미친 것으로 판단된다. 이와 같은 결과는 미세 조직 제어가 알루미늄합금 단조재의 공정설계의 중요한 인자임을 재 확인시켜 주는 것으로 재료의 신뢰성이 필수적으로 요구되는 추진기관의 중요 부품에 적극 고려해야 할 요소라 할 수 있다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.813-820
• /
• 2005

A deployable missile control fin has some structural nonlinearities because of the worn or loose hinges and the manufacturing tolerance. The structural nonlinearity cannot be eliminated completely, and exerts significant effects on the static and dynamic characteristics of the control fin. Thus, It is important to establish the accurate deployable missile control fin model. In the present study, the nonlinear dynamic model of 4he deployable missile control fin is developed using a substructure synthesis method. The deployable missile control fin can be subdivided Into two substructures represented by linear dynamic models and a nonlinear hinge with structural nonlinearities. The nonlinear hinge model is established by using a system identification method, and the substructure modes are improved using the Frequency Response Method. A substructure synthesis method Is expanded to couple the substructure models and the nonlinear hinge model, and the nonlinear dynamic model of the fin is developed. Finally, the established nonlinear dynamic model of the deployable missile control fin is verified by dynamic tests. The established model is In good agreement with test results, showing that the present approach is useful in aeroelastic stability analyses such as time-domain nonlinear flutter analysis.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.391-394
• /
• 2011

In this paper, the shock angle and effect had been compared with numerical data within supersonic area at an forebody such as missiles or an aircraft. By using supersonic wind tunnel in Seoul National University, The shock position and magnitude were measured in the model of cone shape according to mach number. The experiment had been conducted at mach number 2.0, 3.0, and 3.8. As a result, the shock position and magnitude are different from flow velocity, AOA, and AOS in some cases blockage effect had occurred.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.11
• /
• pp.901-907
• /
• 2021

The present study introduces an artificial neural network (ANN) that can predict the missile aerodynamic coefficients for various missile nose shapes and flow conditions such as Mach number and angle of attack. A semi-empirical missile aerodynamics code is utilized to generate a dataset comprised of the geometric description of the nose section of the missiles, flow conditions, and aerodynamic coefficients. Data normalization is performed during the data preprocessing step to improve the performance of the ANN. Dropout is used during the training phase to prevent overfitting. For the missile nose shape and flow conditions not included in the training dataset, the aerodynamic coefficients are predicted through ANN to verify the performance of the ANN. The result shows that not only the ANN predictions are very similar to the aerodynamic coefficients produced by the semi-empirical missile aerodynamics code, but also ANN can predict missile aerodynamic coefficients for the untrained nose section of the missile and flow conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.343-346
• /
• 2006

In this study, optimization process is constructed for developing missile MDO framework. The analysis tools which are integrated in the missile MDO framework and data flow between analysis tools are investigated. Using analyzed results, the optimal design scenario is constructed. Then to verify optimal design scenario, missile design problem is made and performed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.17-17
• /
• 1999

충돌제트는 산업, 항공우주, 군사 분야 등 공학적으로 많은 분야에서 응용되고 있다. 산업분야에서 충돌제트는 설치가 간단하고 형태가 단순하면서도 열 및 물질 전달효과가 상당히 크기 때문에 고효율의 열전달 효과를 얻을 수 있다는 점에서 광범위하게 응용된다. 예를 들면 물체 표면의 부분냉각은 고온 금형의 급속 냉각, 가스터빈 깃의 냉각, 전자부품의 냉각 등에 이용되며 부분 가열에서는 제철, 제지 및 유리공업, 금형의 풀림 등에 폭 넓게 적용된다. 항공우주, 군사분야에서는 수직/단거리 이·착륙기(V/STOL)의 발진, 미사일 발사시스템, 다단 로켓의 분리, 우주공간에서의 도킹, 화염 편향기 등에 적용이 되며 대부분 평판이나 특수한 판의 형상에 과소 팽창제트가 충돌할 때 발생하는 현상에 대한 것이다.

• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2016

This study focuses on the air to air missile control fin planform optimization for the minimizing hinge moment with the considering phenomena of fluid and structure simultaneously. The fluid-structure interaction method is applied for the fluid and structure phenomena simulation of the control fins. A transient-loosely coupled method is used for the fluid-structure interaction simulation because it is suited for using each fluid and structure dedicated simulation software. Searching global optimization point is required many re-calculation therefore in this study, a mathematical model is applied for rapidly calculation. The face centered central composite method is used for generating design points and the 2nd polynomial response surface is sued for generating mathematical model. Global optimization is performed by using the generic algorithm. An objective function is the minimizing travel distance of the center of pressure between Mach 0.7 and 2.0 condition. Finally, the objective function of optimized planform is reduced 7.5% than the baseline planform with satisfying constrained conditions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.4
• /
• pp.39-43
• /
• 1985

The charcterization of optical lithography on the step and repeat projection system is studied. Parameters that influence optical lithography were analyzed and the experiment was performed on the mask of $\pm$ 5rm, the surface flatness. From the experiment, the relationship between linewidth diviation on defocus and linewidth shift on exposure of the small features is obtained. Conditions maintaining good uniformity of small features from these relation-ships is presented.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.3
• /
• pp.53-61
• /
• 1999

Impinging jets are observed when exhaust gases from missiles or V/STOL aircrafts impinge on the ground, flame deflector, ship deck, etc. The flow shows different patterns according to the nozzle geometry, nozzle-to-plate distance, and plate angle, for example. This paper describes experimental works on the phenomena (pressure distribution, occurrence of stagnation bubble, and so on.) when underexpanded supersonic jets impinge on a perpendicular flat plate using a supersonic cold-flow system, and compares the results with those obtained using a shock tunnel. The flow characteristics for the supersonic cold-flow system were also investigated. Surface pressure distribution of supersonic cold-flow system differed from that of shock tunnel because of water and temperature in the low-pressure chamber. Surface pressure distribution as to underexpanded ratio showed similar patterns together.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.19-24
• /
• 2001

The Pilot-Tube is the device that measures velocity and altitude of high speed vehicle. Accurate measurements of speed and altitude are essential to the safe and efficient operation of aircraft. For the purpose of determining optimal design parameters of Pilot-Tube such as nose inlet configuration, nose shape, static hole configuration, and static hole location, subsonic flow field was calculated numerically and analyzed. A Pilot-Tube was manufactured based on numerical flow field analysis, and pressure and air velocity was measured experimentally in the wind tunnel. As a result manufacturing and design technologies of the Pilot-Tube were acquired to make flight-device.