• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.93-101
• /
• 2010

열차의 제동 및 궤도의 조도가 교량의 동적 거동에 미치는 영향에 대하여 연구하였다. 교량구간에서 열차와 교량의 상호작용과 연행하중효과를 라그랑주 운동방정식을 사용하여 고려하였다. 뉴마크 직접적분법을 사용하여 유도한 운동방정식의 해를 구하였으며, 조도성분에 대한 고려는 레일의 조도성분에 대한 PSD 제안 곡선을 사용하였다. 열차의 급제동에 따른 제동효과에 대한 고려는 ASTM E503-82에서의 감속도의 변화량을 근간으로 미끄럼저항을 모형화하였으며, 제동시의 구름저항은 고려치 않았다. 단순지지된 교량과 열차 1량에 대한 예제를 통해 이 연구에서 제안된 방법에 대한 수치적 검증과 매개변수해석을 수행하였다.

• 한국의류산업학회지
• /
• 제7권4호
• /
• pp.433-438
• /
• 2005

Seven commercial lining fabrics normally used in a market were selected: plain-weave fabrics with polyester, nylon, rayon and acetate fiber, and polyester textured yarn, in addition, polyester fabrics with plain, twill and satin weave. Then seam strength, seam efficiency, resistance to slippage of yarns and type of seam destruction were examined related to endurance by textiles in sewing capability of the lining fabrics. In results, as tensile strength was greater, seam strength got greater, which shows tensile strength and seam strength have close relationship. Tensile and seam strength of acetate fabric were the least, but seam efficiency was the greatest. It presents that strong tensile and seam strengths do not show high seam efficiency at the same time. Various types of seam destruction have been shown. When tensile strength of the sewing thread was greater than tensile strength of fabric, fabric destruction was occurred before the sewing thread destruction. When tensile strength of the fabric was greater than seam strength, the sewing thread destruction was occurred. Resistance to slippage of yarns got greater as tensile strength of the fabric got greater. The plain-weave fabric, which tensile strength of fabric was smaller, showed the greater resistance to slippage of yarns than twill and satin weave fabrics. The stretch fabric revealed the optimal lining fabric with the greatest resistance to slippage of yarns.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.14-20
• /
• 2013

All most of floors can become less slip resistant with wear. The deterioration of slip resistance can often occur rapidly. So relatively new products can become hazardous within a short period of time. The main objective of this study was the comparison of slip resistance variations caused by traffic wear and accelerative wear. The second objective was to ascertain the effect of wear, and to find out the causes of slip resistance change. Although statistical differences were observed between results of traffic wear and accelerative wear, the trend of the variations of slip resistance caused by traffic wear and accelerative wear was very similar. The measured slip resistance of tested floor changed up to 29%(and 26.5%) after 100,000 steps(and 750 cycles). As the traffic wear and accelerative wear were progressed, the surface roughness of the tested floor became smoother, and so the floor became more slippery under the wet condition. The abraded(worn out) floor surface tended to become hydrophilic surface, while the new floor surface tended to show hydrophobic nature. This phenomenon would change the wettability of floor surface, and the wettability would affect the variation of slip resistance.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.1-8
• /
• 2012

PURPOSES : Skid resistance on pavements plays an important role in reducing the risk of vehicle skidding on wet surface particularly. Almost 9.3 percent of traffic accidents were occurred under rainy condition and these are over-represented in terms of the severity of the crashes. Recently, unusual weather conditions referred widely as the intensified rainfalls justify the need of a systematic management of skid resistance. In this context, the study carried out the observational study on the skid resistance characteristics of different types of pavement with the time passage. METHODS : This study measured the skid resistance with Pavement Friction Tester at three times within five years. The skid resistance measurement has followed the method suggested by ASTM. RESULTS : As the main results under the scope of this study, skid resistance of asphalt concrete has not nearly reduced with time. On the contrary, skid resistance of cement concrete has been rapidly reduced with time though the highest resistance was gained at the early observation. Porous asphalt concrete shows a steady decrease of skid resistance with time, anyway, the reduction rate according to the increase of measurement speeds is relatively lower than the others. CONCLUSIONS : Based on our study, skid resistance of the pavement should be regarded as one of the pavement management system, so periodic measurement should be made to assure road safety as a whole.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.304-304
• /
• 2011

최근 도시화에 따른 인구증가와 더불어 도로포장 등 불투수면적의 증가로 인하여 우기시 빗물 침투가 차단되어 도심의 지하수위가 저하되며 토양의 건토화, 열섬현상 등의 문제가 발생하게 되었다. 이러한 문제점에 착안하여 본 연구에서는 투수효과를 최대한 고려할 수 있는 고강도의 친환경 콘크리트 블록(에크스톤 바이오 블록; ECOSTONE-BIO BLOCK)을 개발하였으며 기존 콘크리트 블록의 자연적 빗물침투 억제의 문제점을 일부 개선하였다. 본 블록은 캡슐공법을 사용하여, 공극률은 높이면서(투수성 향상), 강도와 내구성이 유지됨은 물론 캡슐안에 황토성분을 첨가하여, 바이오적인 기능 및 재생골재를 이용한 친환경적 제품으로 투수성, 내구성, 기능성을 극대화 시켰다. 또한 제품표면은 천연 백색돌맹이, 흑색돌맹이의 배합으로 자연석재 느낌을 구현하였으며, 쇼트블라스트 및 커링 표면공정으로 미끄럼저항지수를 조절할 수 있어, 기존 콘크리트 보도블록에 비해 투수율, 내구성, 기능성, 안전성이 우수하여, 안전한 보행환경이 가능한 것으로 분석되었다. 마지막으로, 주변 환경과 잘 어울리도록 디자인된 바이오기능성 친환경 블록으로 도심지역 시공시 투수효과에 따른 지하수고갈방지 및 침수피해에 도움을 주리라 사료된다.

• 한국재난정보학회 논문집
• /
• 제13권2호
• /
• pp.191-198
• /
• 2017

레고식 차도블록 시스템은 시설물의 설치 및 유지보수를 위한 도로굴착공사지에서 조립된 구조블록을 사용한 임시포장면을 형성하여 차량 및 보행자의 안전한 통행이 가능하도록 개발된 시스템이다. 레고식 차도블록 시스템의 재료적 품질시험, 미끄럼저항시험 및 압축시험을 통해 기초성능에 대한 연구를 수행하였으며, 현장시험을 통해 레고식 차도블록 시스템의 도로지반 다짐성능을 검토하고 평가하였다. 그 결과, 도로복구를 위한 레고식 차도블록 시스템의 성능 및 다짐 효과는 우수한 것으로 나타났다.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.87-95
• /
• 1988

This paper is studied to know corrowive wear characteristics of austempered ductile cast ironin corrosive environments against mating SM45C hardened two test pieces in distilled water and NaCl aqueous solution. The corrosive wear mechanism was investigated by scanning electron microscopy and retained austenite volume fraction was investigated by X-ray diffractometer. The experimental result show that the corrosive wear characteristics depend largely on the $\textrm{Fe(OH)}_{3}$which is influenced by the critical sliding distance $L_{cr}$ and $L_{cr}$ shorted with increasing NaCl concentration. It was found that the carbides in matrix have a significant effect on their corrosive wear resisance and the fine acicular bainite showed corrosive wear resistance stronger than that of the coarse acicular and platelet bainite. From above results the model of corrosive wear mechanism in corrosive environments is proposed.

• 한국안전학회지
• /
• 제28권1호
• /
• pp.18-23
• /
• 2013

The purpose of this study were to develop and validate a prototype slipmeter used on-site floor. The developed slipmeter was dreg sled type. It measured static coefficient of friction(SCOF). The developed slipmeter was evaluated with ASTM 2508-11 which use four different standard surfaces(polished granite, glazed porcelain, vinyl composite tile, and ceramic tile). The SCOF was then measured with developed slipmeter under the three different contaminants and seven different floors. The test results of slipmeter were also compared with those of BOT-3000, floor surface roughness, and human perception. The test results revealed that developed slipmeter successfully ranked all four standard surfaces and differentiated among standard surfaces with varying degrees of slipperiness. The developed slipmeter couldn't properly measure slipperiness under the two kind of floors(polished tile, ground steel plate) and one kind of contaminant(glycerol). The test results of developed slipmeter had stronger correlation with those of BOT-3000 and floor roughness under the water and detergent solution than under the glycerol. The test results of developed slipmeter also showed stronger correlation with those of BOT-3000 and surface roughness than those of human perception. The newly developed slipmeter had been found to give consistent results under the test conditions except for two kind of floors(polished tile, ground steel plate) and one kind of contaminant(glycerol).

• 한국재난정보학회 논문집
• /
• 제12권3호
• /
• pp.242-248
• /
• 2016

본 논문은 GMA(SIS, Stylene Isoprene Stylene) 고분자계 수지를 기반으로 제조된 아스팔트 바인더를 사용하여 플랜트에서 제조하는 혼합물로 방수기능을 갖도록 성능을 개선한 신개념의 불투수성 아스팔트 포장의 연구를 위해 수행하였다. GMA 고분자 수지 기반의 아스팔트는 유연성과 탄성을 바탕으로 중차량의 충격에 의한 영향을 받지 않으며, 우수 시에 포트 홀의 발생과 소성변형 등 여름철 온도 변화에도 안정적이다. 새롭게 제안된 열가소성 폴리머를 사용한 아스팔트 포장재료는 방수기능은 물론 역학적 특성을 검증하기 위해 KS기준과 ASTM기준에 맞게 안정도, 흐름값, 공극률, 동적 안정도, 인장강도비, 미끄럼 저항성 실험을 하여 역학적 특성을 분석 하였다.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.17-23
• /
• 2013

PURPOSES : This study aimed to measure the skid resistance of the sidewalk in order to find out the relationship between different surface types and skid resistance. By using British Pendulum Tester, skid resistance of sidewalk was measured in a wet after snow-melt, sludgy, and snowy conditions. METHODS : The skid resistance was measured on surfaces including Concrete Interlocking Block Paving, Colour Asphalt Pavement, Granite Block Paving, Manhole, and Tactile Paving for Visually Impaired. Five trials at each measurement were made, and the average and standard deviation were derived. RESULTS : The skid resistance measured in wet after snow-melt, sludgy, and snowy conditions for the various surface types are summarized and compared. Reduction rates of skid resistance of sludgy and snowy against wet after snow-melt are also analysed. The skid resistance variation between measurement points which mimic pedestrian route in study site are analysed to check out the consistency of the skid resistance along the sidewalk. CONCLUSIONS : The study concluded that the skid resistance of sidewalk surfaces varied depending on the surface types and weather conditions. Secondly, reduction rates of skid resistance according to weather changes are varied depending on the surface types, Thirdly, consistency of skid resistance along the pedestrian route is hardly acquired in the study site at least. So, future study on the consistency evaluation for skid resistance along sidewalk is strongly recommended.