• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.288-294
• /
• 2007

The LSCF cathode far Solid Oxide Fuel Cell was investigated to develop high performance unit cell at intermediate temperature by modified oxalate method with different electrolytes and different pH. The LSCF powders employed La, Sr, Co and Fe oxides, oxalic acid, ethanol and $NH_4OH$ solution were synthesized with pH controlled as 2, 6, 7, 8, 9 and 10 at $80^{\circ}C$ Single crystalline phase was obtained from pH $2{\sim}9$. on the other hand, $La_2O_3$ appeared from pH 10. Very fine powder with particle size of 50 nm was obtained at calcination temperature of $800^{\circ}C$ for 4 hours. LSCF cathode synthesized at pH 7 showed the highest electric conductivity in the temperature range of $600^{\circ}C$ to $900^{\circ}C$ its value was 950 S/cm at $900^{\circ}C$ Under same synthesis conditions, polarization resistance of each LSCF cathode was changed with different calcination temperatures. As-prepared powder presented 2.52, 1.54 and $2.58\;{\Omega}$ at $600^{\circ}C$ with ScSZ, 8Y-YSZ and GDC as its electrolyte respectively after calcination at $800^{\circ}C$ for 4 hours.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.307-312
• /
• 1984

The dried pure shells deprived of soft tissues were subjected to analysis of chitin-protein complexes from 5 species of marine crustaceans, including 2 species of crabs and 3 species of shrimps. The protein fractions were obtained from chitin-protein complexes under the varying conditions of extractions and the crude chitin was prepared from the shells by the sulfurous acid process. The crude chitin was purified through the extraction with several organic solvents such as dimethyl-acetamide, N-methylpyrrolidone. The purified chitin was also examined using the phase contrast microscope. Total protein contents of the shells were diverse, showing 9.6% for Portunus trituberculatus, 3.1%, Charybdis bimaculata, 9.4%, Penaeus japonicus, 10.9%, Metapenaeus intermedius and 5.8%, Squilla oratoria. Covalently bound protein varied with species from 2.1% for Charybdis bimaculata to 9.9% for Metapenaeus intermedius. The puified chitin contents of the shells were shown to 21.1% for Portunus tritube rculatus, 6.2%, Charybdis bimaculata, 20.2%, Penaeus japonicus, 27.1%, Metapenaeus intermedius and 25.5%, Squilla oratoria. Exceptionally low analytical value obtained with Charybdis bimaculata are supposed to be due to the very young subjects. The ratios of chitin to covalently bound protein in the shells were various such as 2.7 to 1 for Portunus trituberculatus, Penaeus japonicus and Metapenaeus intermedius, 3.1 to 1, Charybdis bimaculata and 6.1 to 1, Squilla oratoria. The microscope finding of the purified chitin showed the filamentous form in all the specimen.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.27-38
• /
• 1993

In this study, we investigated the grinding and sedimentation(elutriation) process of the dusts for the effective separation of high purity iron and iron oxides. For characterization of the dust, particle size distribution and chemical composition, were examined. The results obtained in this study may be summarized as follows : 1. The converter CF(clarifier) dust of the Pohang 1st, 2nd steel making factory and EC(Evaporation Cooler), EP(Eltrostatic precititator) dust of the Kwangyang 2nd steel making factory are composed $\alpha$-Fe(21~50%), FeO(wustite)$Fe_3$$O_4$(magnetite), $Fe_2$$O_3$, CaO, $Al_2$$O_3$, $SiO_2$, and etc. 2. Pure iron has ductile characteristic in nature, particle size of the pure iron increase by increasing the grinding time. On the other hand, it is conformed that bo고 particles of hematite and magnetite become less than 325 mesh after 10 minutes grinding. 3. By applying the elutriation technique for the EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.17% of pure Fe was recovered with 37.8% yield at grinding time for 40 minutes. 4. By applying the elutriation technique for the CF dust of the Pohang 2nd steel making factory, the iron powder of high content more than 98.38% of pure Fe was recovered with 44.42% yield at grinding time for 40 minutes. 5. When magnetic separation was performed using plastic bonding magnet of 70 gauss, more than 98% Fe grade of iron powder was recovered in the size range +65 -200 mesh but the recovery of it was low.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.742-748
• /
• 2009

In the meat industry, correct breed information in food labeling is required to assure meat quality. Genetic markers provide corroborating evidence to identify breed. We described the development of DNA markers to discriminate between Korean beef cattle (Hanwoo), Holstein, and mixed cow beefs. As most breeds are standardized for coat colour, the melanocortin 1 receptor (MC1R) gene, involved in the regulation of eu/pheomelanins synthesis, has been suggested as marker for breed traceability of products of animal origin. We also designed sex-determining region Y (SRY) gene specific primers for Y chromosome detection. In this study, fragments of MC1R gene and SRY gene were amplified by multiplex-PCR and subjected to digestion by MspA1I restriction endonuclease. Reaction products were analysised by denaturing high performance liquid chromatography (DHPLC). As a result, we identified 6 DHPLC peak types from MC1R gene and SRY gene analysis. DHPLC method showed more sensitive than RFLP method for DNA fragments analysis. Therefore, DHPLC method can apply to identify for Hanwoo, Holstein and mixed beef.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.253-261
• /
• 2004

Ginsenosides and green tea extracts show a variety of biomedical efficacies such as anti-aging, anti-oxidation and anti-tumor-promotion effects. (-)-Epigallocatechin-3-gallate (EGCG) has been reported to inhibit the UVB-induced apoptosis by increasing the Bcl-2-to-Bax ratio. We have previously shown that ginsenoside Fl protects human HaCaT cells from ultraviolet-B (UVB)-induced apoptosis by maintaining constant levels of Bcl-2 and Brn-3a. Here, we investigate the combined effect of ginsenoside Fl and EGCG on the protection of human HaCaT keratinocyte against UVB-induced apoptosis. When treated individually, although 5 ${\mu}$M ginsenoside Fl and 50${\mu}$M EGCG protected cells from UVB-induced apoptosis, 2${\mu}$M ginsenoside Fl or 10${\mu}$M EGCG treatment showed very little protection effect. However, cotreatement of 2${\mu}$M ginsenoside Fl and 10${\mu}$M EGCG successfully protected HaCaT cells from UVB-induced cell death. As expected, combining ginsenoside Fl and EGCG efficiently prevented UVB-induced decrease of Bcl-2 and Brn-3a expression. In addition, cotreatment with ginsenoside F1 and EGCG prevented the dephosphorylation of Rb, whereas individual treatment with ginsenoside Fl or EGCG failed to prevent the dephosphorylation of Rb even at high concentrations.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.483-490
• /
• 2008

Several tartaric acid-degrading bacteria were isolated from Korean grape wine pomace after enrichment culture at $30^{\circ}C$ for 10 days in liquid media containing tartaric acid Among them, strains KMBL 5777 and KMBL 5778 exhibited the highest level in the growth and tartaric acid degradability in a medium containing 0.2%(w/v) tartaric acid as a sole carbon source. They were identified as Acetobacter tropicalis based on their morphological and physiological characteristics as well as their 16S rDNA sequences. Blast search of the 16S rDNA sequences revealed that the isolated strains are closest to Acetobacter tropicalis. Homologies of the sequences of KMBL 5777 and KMBL 5778 were 96.0 and 98.9%, respectively with those of A. tropicalis LMG 1663. Both the two bacteria showed higher tartaric acid degradation at $25^{\circ}C$ that those at 20 and $30^{\circ}C$. They could degrade tartaric acid at a wide range of pH between 4.0 and 7.0 with the most rapid degradability at pH 7.0. However, when the bacteria were grown for 8 days, the same level of tartaric acid degradation was observed at pH 4.0, 5.0, 6.0 and 7.0, which was 90.0% of degradation of the acid.

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.6
• /
• pp.474-483
• /
• 1992

Background: Regardless of its causes, acute lung injury is characterized pathophysiologically by increased pulmonary arterial pressure and the protein-rich edema. Many inflammatory mediators are known to be involved in the pathogenesis of acute lung injury, including oxygen free radicals (OFR). But the changes in pulmonary capillary pressure in the OFR-induced acute lung injury is not clear. While the pulmonary edema characterized by the movement of fluid and solutes is dependent on the pressure gradient and the alveolar-capillary permeability, the role of pulmonary capillary pressure in the development of pulmonary edema is also not well understood. Method: Male Sprague-Dawley rats were divided into 5 groups: normal control (n=5), xanthine/xanthine oxidase (X/XO)-treated group (n=7), catalase-pretreated group (n=5), papaverine-pretreated group (n=7), and indomethacin-pretreated group (n=5). In isolated perfused rat lungs, the sequential changes in pulmonary arterial pressure, pulmonary capillary pressure by double occlusion method, and lung weight as a parameter of pulmonary edema were determined. Results: Pulmonary arterial pressure and pulmonary capillary pressure were increased by X/XO. This increase was significantly attenuated by catalase and papaverine, but indomethacin did not prevent the X/XO-induced increase. Lung weight gain was also observed by X/XO perfusion. It was prevented by catalase. Papaverine did not completely block the increase, but significantly delayed the onset. Indomethacin had no effect on the increase in lung weight. Conclusion: These data suggest that increased pulmonary capillary pressure by OFR may aggravate pulmonary edema in the presence of increased alveolar-capillary permeability and this may not be mediated by cyclooxygenase metabolites.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.8-15
• /
• 2010

Purpose: The purpose of this study was to evaluate the effect of various methods of dentin bonding agent application and air abrasion pretreatment on microtensile bond strength between dentin and resin, using a self-etching adhesive system. Material and methods: Thirty freshly extracted human molars were obtained and divided into 6 groups of 5 teeth. A 2-step self etching adhesive system (Clearfil SE Bond) was used for all groups. The control specimens were prepared using a direct immediate bonding technique. The delayed dentin sealing specimens were prepared using an indirect approach without dentin prebonding. The immediate dentin sealing specimens were prepared using dentin prebonding immediately following preparation. Immediate dentin sealing teeth and delayed dentin sealing teeth had provisional restorations using Fermit for two weeks. Then all specimens of each group were divided into two groups of three, depending on air abrasion pretreatment. Composite "crowns" were incrementally built on and specimens were stored in water for 24 hours. All teeth were prepared for a microtensile bond strength test. Bond strength data were analyzed with a one-way ANOVA test, and post hoc comparison was done using the Scheffe's test. Results: The mean microtensile bond strengths of all groups were not statistically different from each other. Conclusion: When preparing teeth for indirect restorations, IDS and DDS with Clearfil SE bond, have no difference on the microtensile bond strength between dentin and resin. Air abrasion pretreatment did not affect the microtensile bond strength when using IDS and DDS with Clearfil SE bond.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.55-60
• /
• 2010

Purpose: The shrinkage of dental resin cement may cause several clinical problems such as distortion that may jeopardize the accurate fit to the prepared tooth and internal stress within the restorations. It is important to know the polymerization shrinkage-strain of dental resin cement to reduce clinical complications. The purpose of this study was to investigate the polymerization shrinkage-strain kinetics of six commercially available dental resin cements. Material and methods: Three self-cure resin cements (Fujicem, Superbond, M-bond) and three dual-cure resin cements (Maxcem, Panavia-F, Variolink II) were investigated. Time dependent polymerization shrinkage-strain kinetics of the materials were measured by the Bonded-disk method as a function of time at $23^{\circ}C$, with values particularly noted at 1, 5, 10, 30, 60, 120 min after mixing. Five recordings were taken for each materials. The data were analyzed with one-way ANOVA and Scheffe post hoc test at the significance level of 0.05. Results: Polymerization shrinkage-strain values were 3.72%, 4.19%, 4.13%, 2.44%, 7.57%, 2.90% for Fujicem, Maxcem, M bond, Panavia F, Superbond, Variolink II, respectively at 120 minutes after the start of mixing. Panavia F exhibited maximum polymerization shrinkage-strain values, but Superbond showed minimum polymerization shrinkage-strain values among the investigated materials (P < .05). There was no significant differences of shrinkage-strain value between Maxcem and M bond at 120 minutes after the start of mixing (P > .05). Most shrinkage of the resin cement materials investigated occurred in the first 30 minutes after the start of mixing. Conclusion: The onset of polymerization shrinkage of self-cure resin cements was slower than that of dual-cure resin cements after mixing, but the net shrinkage strain values of self-cure resin cements was higher than that of dual-cure resin cements at 120 minutes after mixing. Most shrinkage of the dental resin cements occurred in the first 30 minutes after mixing.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.685-695
• /
• 2004

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four composite resins in an alkaline solution. The resistance to degradation was evaluated on the basis of mass loss(%), degradation depth(${\mu}m$), Si loss(ppm) and wear depth. The brands studied were Heliomolar flow, Filtek supreme, Point4, Tetric flow. The results were as follows: 1. The sequence of the mass loss was in descending order by Heliomolar flow, Filtek supreme, Point4, Tetric flow. There was significant differences among the materials except Heliomolar flow and Filtek supreme. 2. The sequence of the degree of degradation layer depth was in descending order by Filtek supreme, Heliomolar flow, Tetric flow, Point4. There were significant differences among the materials except Heliomolar flow and Tetric flow. 3. The sequence of Si loss was in descending order by Filtek supreme, Heliomolar flow, Point4, Tetric flow. There were significant differences among the materials except Point 4 and Tetric flow. 4. The sequence of maximum wear depth was in descending order by Heliomolar flow, Point4, Fillet supreme, Tetric flow and there was increasing wear depth on soaking in 0.1N NaOH solution. 5. When observed with SEM, destruction of bonding between matrix and filler was observed and when observed with CLSM, the depth of degradation layer of specimen surface was observed. There results indicate that wear and hydrolytic degradation could be considered to be evaluation factors of composite resins.