• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.277-277
• /
• 2007

$(Bi,La)_4Ti_3O_{12}$ (BLT) 물질은 결정 방향에 따른 강한 이방성의 강유전 특성을 나타낸다. 따라서 BLT 박막을 이용하여 FeRAM 소자 등을 제작하기 위해서는 결정의 방향성을 세심하게 제어하는 것이 매우 중요하다. 현재까지 연구된 BLT 박막의 방향성 조절 결과를 보면, BLT 박막을 스핀 코팅 법 (spin coating method)으로 중착하고, 핵생성 열처리 단계를 조절하여 무작위 방향성 (random orientation)을 갖는 박막을 제조하는 방법이 일반적이었다. 그런데 이러한 스핀 코팅법에서의 핵생성 단계의 제어는 공정 조건 확보가 너무 어려운 단점이 있다. 이러한 어려움을 극복할 수 있는 대안은 스퍼터링 증착법 (sputtering deposition method), PLD법 (pulsed laser deposition method) 등과 같은 PVD (physical vapor deposition) 법의 증착방법을 적용하는 것이다. PVD 법으로 증착하는 경우에는 이미 박막 내에 무수한 결정핵이 존재하기 때문에 핵생성 단계가 필요 없게 된다. PVD 증착법의 적용을 위해서는 타겟 (target)의 제조 및 평가 실험이 선행되어야 한다. 그런데 벌크 BLT 재료의 소결공정 조건과 전기적 특성에 관한 연구 결과는 거의 발표 되지 않고 있다. 본 실험에서는 $Bi_2O_3$, $TiO_2$ and $La_2O_3$ 분말을 이용하여 최적의 조성을 구하기 위하여 Bi양을 변화시키며 타겟을 제조 하였다. 혼합된 분말을 하소 후 pallet 형태로 성형하여 소결을 실시하였다. 시편을 1mm 두께로 연마하고, 표면에 silver 전극을 인쇄하여 전기적 특성을 측정하였다. Bi양이 3.28몰 첨가된 조성에서 최대의 잔류분극 (2Pr) 값을 얻었고, 이때의 값은 약 $18{\mu}C/cm^2$ 정도였다. 최적화된 조성 ($Bi_{3.28}La_{0.75}Ti_3O_{12}$)으로 BLT 타겟을 제조하여 PLD법으로 박막을 제조하였다. 박막 제조 시 압력은 $1{\times}10^{-1}\;{\sim}\;1{\times}10^{-4}\;Torr$ 범위에서 변화시켰다. $1{\times}10^{-1}\;Torr$ 압력을 제외하고는 모든 압력에서 BLT 박막이 증착되었다. 중착된 박막을 $650\;{\sim}\;800^{\circ}C$에서 30분간 열처리를 실시하고 전기적 특성을 평가한 결과, $1{\times}10^{-2}\;Torr$에서 증착한 박막에서 양호한 P-V (polarization-voltage) 이력곡선을 얻을 수 있었고, 이때의 잔류분극 (2Pr) 값은 약 $6\;{\mu}C/cm^2$ 이었다. 주사전자현미경 (SEM)을 이용하여 BLT 박막 표면의 미세구조도 관찰하였는데, 스핀코팅 법으로 증착한 경우에 관찰되었던 조대화된 입자들은 관찰되지 않았고, 상당히 양호한 입자 크기 균일도를 나타내었다.

• Journal of Wetlands Research
• /
• v.24 no.1
• /
• pp.59-67
• /
• 2022

The interest in LID facilities is increasing worldwide for recovery of natural water cycle system to destroy by urbanization. However, problems are raised when installation of LID because comprehensive analysis about design capacity adequacy of LID facilities was not conducted completely. In this research, removal efficiency and design volume adequacy of LID facilities were analyzed based on rainfall monitoring data in four LID facilities(Vegetated Swale, Vegetative Filter Strip, Bio-Retention and Permeable Pavement). As a result, group of LID facility designed on WQV was shown higher flow(37%) and pollutants(TSS, BOD, TN and TP) removal efficiencies(20 ~ 37%) than group of LID facility designed on WQF. SA/CA graph was drawn for evaluation of design volume adequacy based on rainfall monitoring data. In this SA/CA graph, coefficient of determination show over 0.5 in all parameter, especially, Flow and TP were show over 0.95. And, 'SA/CA & L/CA' graph considering difference of structure mechanism in LID facility suggested in this research was confirmed that improved coefficient of determination in flow, TSS and TP than SA/CA graph. According to this research results, feasibility of applying 'SA/CA & L/CA' graph for evaluation of design volume adequacy in LID facility, and it is necessary to follow up research for generalization and normalization.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2197-2204
• /
• 2000

Lignin is a major component of wastewater generated in the chemical processing of wood. Because it is recalcitrant, it inhibits biological treatment of wastewater of pulp manufacturing, especially high concentration of lignin may inhibit the anaerobic digestion. The objective of this study was to evaluate the toxicity of high molecular hardwood lignin (lignosulfonate, MW $\geq$ 20,000) on aceticlastic methanogens in the batch reactors at different temperatures with different sludge concentrations, using anaerobic serum bottles. The hardwood lignin was found to inhibit anaerobic conversion of acetate to methane and carbon dioxide, shown with a long lag-phase before methanogenesis started. The methanogens assumed not to be able to acclimate to the lignin were found to be acclimated slowly in the batch experiments, finally reaching non-toxic levels in which methane production could start. The hardwood lignin was found not to be bacteriocidal but bacteriostatic to aceticlastic methanogens. Hardwood lignin(lignosulfonate) at 1.3, 2.6, and 3.9%(w/w) inhibited the acetateutilizing methanogens of anaerobic digester sludge by 14.5, 17.8, 21.1 days(in noninhibitory condition it took 10 days) to produce the same amount of methane. The inhibitory effect of lignin was examined at temperature ranges of $30^{\circ}C$ to $50^{\circ}C$. When 2.6% of lignin was contained in wastewater, methane production was highest at $30^{\circ}C$ during initial 8 days. At $4^{\circ}C$, methane production rapidly increased after 12 days of digestion, the value became higher than that at $30^{\circ}C$ after 14 days. However, the methane production was completely inhibited during whole digestion period at $50^{\circ}C$. High ratio of lignin concentration to initial anaerobic sludge concentration gave tolerance to the inhibition. In this experiment, high molecular hardwood lignin was not degraded and decolorized.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.259-267
• /
• 2003

In vivo $^1$H magnetic resonance spectroscopy (MRS) at 4.7 T was applied to investigate the cerebral metabolite changes of mice brain before and after experimental brain trauma. In vivo $^1$H MR spectra were acquired from a voxel covering right parietal cortex in normal brain, used as control subjects. After experimental brain trauma using the fluid percussion injury (FPI) method, $^1$H MR spectra were acquired from the same lesion three days after trauma. Metabolite ratios of the injured lesion were compared to those of controls. After trauma, N-acetylaspartate (NAA)/creatine (Cr) ratio, as a neuronal marker was decreased significantly versus controls, indicating neuronal loss. The ratio of NAA/Cr in traumatic brain contusion was 0.90$\pm$0.11, while that in normal control subjects was 1.13$\pm$0.12 (P=0.001). Choline (Cho)/Cr ratio had a tendency to rise in experimental brain contusion (P=0.02). Cho/Cr ratio after trauma was 0.91$\pm$0.17 while that before traumas was 0.76$\pm$0.15. Cho/Cr ratio was increased and this might indicate a inflammatory activity. However, no significant difference of [(glutamate＋glutamine) (Glx)]/Cr was established between experimental traumatic brain injury models and normal controls. Lactate (Lac)/Cr ratio was appeared as a sign of shifted posttraumatic energy metabolism and increased versus controls. These findings strongly suggest that in vivo $^1$H MRS may be a useful modality for clinical evaluation of traumatic contusion and could aid in better understanding the neuropathologic process of traumatic contusion induced by FPI. In the present study, in vivo $^1$H MRS was proved to be a useful non-invasive method for in vivo diagnosis and monitoring of posttraumatic metabolism in models of brain contusion.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.2
• /
• pp.35-43
• /
• 2005

Bioslurping combines the three remedial approaches of bioventing, vacuum-enhanced free-product recovery, and soil vapor extraction. Bioslurping is less effective in tight (low-permeability) soils. The greatest limitation to air permeability is excessive soil moisture. Optimum soil moisture is very soil-specific. Too much moisture can reduce air permeability of the soil and decrease its oxygen transfer capability. Too little moisture will inhibit microbial activity. So Modified Fenton reaction as chemical treatment which can overcome the weakness of Bioslurping was experimented for simultaneous treatment. Although the diesel removal efficiency of SVE process increased in proportion to applied vacuum pressure, SVE process was difficulty to remediation quickly semi- or non-volatile compounds absorbed soil strongly. And SVE process had variation of efficiency with distance from the extraction well and depth a air flow form of hemisphere centering around the well. Below 0.1 % hydrogen peroxide shows the potential of using hydrogen peroxide as oxygen source but the co-oxidation of chemical and biological treatment was impossible because of the low efficiency of Modified Fenton reaction at 0.1 % (wt) hydrogen peroxide. NTA was more efficiency than EDTA as chelating agent and diesel removal efficiency of Modified Fenton reaction increased in proportion to hydrogen peroxide concentration. Hexadecane as typical aliphatic compound was removed less than Toluene as aromatic compound because of its structural stability in Modified Fenton reaction. What minimum 10% hydrogen peroxide concentration has good remediation efficiency of diesel contaminated groundwater may show the potential use of Modified Fenton reaction after bioslurping treatment.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.115-116
• /
• 2010

광역상수도의 경우 수자원공사 및 지방상수도 사업자들에 의해 전문적으로 수질을 관리하고 음용수를 보급하고 있으나 소규모 수도시설의 경우 전문능력을 갖춘 관리자가 아닌 마을의 대표자가 맡아 관리함에 따라 안정성 및 유지관리의 어려움이 자주 제기되고 있다.[1] 또한 소규모 수도시설의 경우 취수원으로 지하수나 계곡수를 이용하여 여과나 염소소독을 거쳐 음용수로 이용함에 따라 중금속 및 무기이온 등 각종 오염물질이 효과적으로 제거되지 않아 이를 사용하는 주민들이 불편함을 겪고 있는 실정이다. 환경부의 법정 수질 검사에 따르면 부적합 판정을 받은 곳의 대부분은 마을상수도와 소규모 급수시설인 것으로 나타났으며 초과 항목으로는 무기이온 중 특히 불소와 질산성질소 인 것으로 나타났다.[2] 이러한 문제점을 해결하고자 기존의 고도 정수처리 시설인 막여과, 오존처리, 활성탄 흡착 공정 등을[3-5] 적용하고 있으나 소규모 수도시설에 적용하기에는 유지관리, 규모, 경제적 측면 등 여러 한계점을 지니고 있다. 따라서 본 연구에서는 이러한 문제점을 해결하기 위한 방안으로 전기응집기술을 이용하여 음용수 수질기준을 초과하는 무기이온 중 불소와 질산성 질소를 제거하고자 하였다. 전기응집기술은 제거효율이 높고, 운전이 용이하며 부가적인 화학약품의 첨가가 불필요하다.[6,7] 또한 기존의 고도정수처리 기술에 비해 전기응집 공정은 처리효율과 경제적인 측면 모두를 만족시키고 있어 소규모 수도시설의 불소와 질산성질소를 효과적으로 제거할 수 있는 방안으로 판단된다. 본 연구에 사용된 실험장치는 직류전원공급장치 (DC power supply), 반응조, 전극으로 구성되어 있다. 직류전원공급장치는 최대전압 30 Volt, 최대 전류 30 Amper 까지 조절 가능하였으며 반응조의 크기는 14.5cm(w) ${\times}$ 9cm(L) ${\times}$ 22cm(H) 이고 실용적 1.5L이다. 반응조의 상부에는 전극이 고정될 수 있도록 0.5cm 간격의 홈을 만들어 제작 하였다. 전극은 가용성 전극인 알루미늄 (Al), 스테인레스스틸(SUS304)를 이용하였다. 이를 통해 전류밀도, 전극간격 등의 변수를 두어 최적의 전기응집 운전 조건을 파악하였으며 이는 소규모 수도시설의 수질개선 향상에 도움이 될 수 있을 것으로 판단된다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.2
• /
• pp.174-190
• /
• 1996

Damage assessment based on in situ surveys for oil spills in marine environment is limited by fundamental difficulties as well as tremendous expenses. Except for intertidal zones, the damage is not preserved well. Also such surveys are usually confined to adult organisms. To overcome these limitations a computer model, NRDAM/CME, was developed in the case of USA (Reed et al., 1989), where an acute toxicity data base was used to assess indirect damages through food webs and loss due to recruitment as well as adult losses. In the present study damage assessment of natural biological resources for hypothetical oil spills is attempted using a computer model for hypothetical spills of Bunker C and heavy crude oil. In the model, the logical structure of NRDAM/CME was adopted, and biomass and productivity database were compiled for the Korean waters. The results showed that the damage increased in a nonlinear fashion as the spill amount increased. The magnitude of the damage depended upon the chemical properties of oil viscosity and solubility in particular, which implies that usage of oil dispersant might increase the damage by dispersing oil. The results also indicate that long term damage due to recruitment loss could be greater than short term damage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.308.2-308.2
• /
• 2014

최근 III-N계 물질 기반의 광 반도체 중 m-면 사파이어 기판을 사용하여 반극성 (11-22) GaN박막을 성장하는 광반도체의 발광효율을 높이려는 연구가 많이 진행되고 있다. 하지만, 반극성 (11-22) GaN와 m-면 사파이어 기판과의 큰 격자상수 차이와 결정학적 이방성의 차이에 의해 많은 결정 결함이 발생하게 된다. 이러한 결정결함들은 반극성 LED소자내에서 누설전류 및 비발광 재결합, 순방향전압 등의 소자특성을 저하시키는 큰 요인이 되기 때문에 고효율 발광소자를 제작함에 있어 어려움을 야기시킨다. 이러한, 반극성 LED 소자의 효율 향상을 위해 결함 분석에 대한 연구를 주를 이루고 있는 상황으로, n-GaN층에 Si도핑에 관한 연구가 진행되고 있다. 이미 극성과 비극성에서는 n-GaN층에 Si이 도핑이 증가될수록 결정질이 향상되고, 양자우물의 계면의 질도 향상 되었다는 보고가 있다. 본 연구에서는 반극성 (11-22) GaN 기반의 발광소자를 제작함에 있어 n-GaN 층의 도핑 농도 변화를 통한 반극성 GaN 박막의 결정성 및 전기적 특성 변화에 따른 LED소자의 전계 발광 특성에 대한 연구를 진행하였다. 금속유기화학증착법을 이용하여 m-면 사파이어 기판에 $2.0{\mu}m$두께의 반극성 (11-22) GaN 박막을 저온 GaN완충층이 존재하지 않는 고온 1단계 성장법을 기반으로 성장하였다.[3] 이후, $2.0{\mu}m$ 반극성 (11-22) GaN 박막 위에 $3.5{\mu}m$ 두께의 n-GaN 층을 성장시켰다. 이때, n-형 도펀트로 SiH4 가스를 4.9, 9.8, 19.6, 39.2 sccm으로 변화하여 성장하였다. 이 4가지 반극성 (11-22) n-GaN 템플릿을 이용하여 동일 구조의 InGaN/GaN 다중양자우물구조와 p-GaN을 성장하여 LED 구조를 제작하였다. X-선 ${\omega}$-rocking curve를 분석한 결과, 이러한 특성은 반극성 (11-22) n-GaN층의 Si 도핑농도 증가에 따라서 각 (0002), (11-20), (10-10) 면에서 결정 결함이 감소하고, 반극성 (11-22) n형 GaN템플릿을 이용하여 성장된 반극성 GaN계 LED소자는 20mA인가 시 도핑 농도 증가에 따라 9.2 V에서 5.8 V로 전압이 감소하였으며 역방향 전류에서도 누설전류가 감소함이 확인되었다. 또한, 전계 발광세기도 증가하였는데, 이는 반극성 n형 GaN박막의 실리콘 도핑농도 증가에 따라 하부 GaN층의 결정성이 향상과 더불어 광학적 특성이 향상되고, n형 GaN층의 전자 농도 및 이동도의 동시 증가에 따라 전기적 특성이 향상 됨에 따라 LED소자의 전계 발광 특성이 향상된 것으로 판단된다.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.14 no.1
• /
• pp.3-11
• /
• 2003

Attention-deficit/Hyperactivity disorder(ADHD) is the most common psychiatric disorder of childhood and among the most prevalent chronic health conditions affecting school-aged children. Children with ADHD experience significant functional problems, such as school difficulties, academic underachievement, troublesome interpersonal relationships with family members and peers, and low self-esteem. The most widely used pharmacological treatments for ADHD are psychostimulants, such as methylphenidate and amphetamine salts. These medications provide clinical efficacy by increasing the availability of catecholamines, primarily dopamine, in the frontal lobe of the brain. immediate-release(IR) formulations of sychostimulants were among the most effective psychotrophic medications in the psychopharmacological treatment. However, there are some limitations of IR formulations：the short half-life and duration of efficacy, which result in the need for multiple daily dosing and the poor compliance. These limitations have led to the development of once-daily, extended-release(ER) formulations of methylphenidate and amphetamine salts. However, these ER formulations may not be as immediately helpful to ADHD children due to delayed onset of action and the acute tolerance which is the failure to sustain the efficacy with the same concentration of drug as the initial stage of medication. OROS-methylphenidate(Concerta$^{\circledR}$) given once a day produces an ascending-pattern plasma drug level generated by the osmotically released, timed drug-delivery system. These new formulations of the psychostimulants have been shown to be a useful alternative to old stimulant medications through the evidence by the clinical trials.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.2
• /
• pp.113-119
• /
• 2015

The measurement of hydration level in the surface layer of the skin, stratum corneum (SC), gives important information on the biophysical properties and function of the skin barrier such as softness, flexibility, and healthiness of the skin. But it is difficult to measure a consistent hydration level from a sample to another sample due to individual variations and environmental changes. The aim of this study was to evaluate objective hydration after using various products in the SC. The SC Hydration was measured by capacitance (Corneometer$^{(R)}$, C+K, Germany) on the ventral site of forearm from 40 healthy volunteers. The skin surface was chronologically measured immediately after application of the test products and 3 and 6 hours later. We analyzed the averages of five measurements of each site and used the hydration increase rate for correction on untreated site variation. We found that most polyols including glycerol and butylenes glycol influenced directly the hydration increase rate in the SC previously. In this study, glycerol was used to prepare the standard products from 0 to 20 percents and applied to the same volunteers. The individual standard curve showed linear relation to glycerol concentrations. Based on the the standard curve, hydration of SC was converted into hydration increase rate to glycerol concentrations. The converted glycerol concentrations of products were repetitive and reproducible. In addition, the individual standard curve was used to relate the skin type of each individual. These results suggest that the hydration of the SC standardized regardless of external variation and individual skin condition can explain detailed skin state variation. Further studies will be conducted with other ingredients such as surfactants, lipids and aqueous materials, and with other methods for noninvasive measurement.