• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.178-182
• /
• 2010

Simultaneous removal reaction for NOx, soot over Pt catalysts using various $TiO_2$ as support was studied. The catalytic tests ware carried out injectin NO, soot, NO and soot simultaneously on each catalysts. As results, it showed different NOx removal efficiency and soot oxidation rate according to various kinds of $TiO_2$. Onset temperature of soot oxidation has a correlation to $NO_2$ generated for the independently performed NOx. It was investigated that NO to $NO_2$ oxidation was intimately related to crystallite size and surface area, and it has a tremendous impact on Pt aggregation on the catalyst surface and catalyst' reducibility. Therefore, we concluded that major index of the reaction was physico-chemical properties of catalyst' supports.

• Journal of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.329-336
• /
• 1980

A domestic phosphogypsum was calcined in a batch type fluidized bed reactor at various reaction temperatures ranging 90∼180$^{\circ}$ without and with an alkaline additive amounting up to 5% of gypsum, and physical properties of the resultant products were compared following their characterization by X-ray diffraction pattern and DTA. It has been found that dehydration reactions were uniformly carried out in the fluidized bed reactor and only hemihydrate was obtained at 90$^{\circ}$ whereas at higher temperatures dehydration reaction progressed further. When gypsum was charged to the reactor preheated at over 140$^{\circ}$, a considerable degree of dehydration occurred before the reactant reached the initially set reactor temperature and in particular, at over 160$^{\circ}$ most of dehydration reaction was performed prior to the present reactor temperature. However, it has been found that gypsum mostly transforms into hemihydrate around the reactant temperature of 140$^{\circ}$ while transformation into anhydrite mostly occurs around $160^{\circ}C.$ When calcium hydroxide was added to gypsum in the reactor, the optimum physical properties of the calcined product were obtained at the weight ratio of $Ca(OH_2)/P_2O_5$ = 3.2.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.880-883
• /
• 2009

석탄가스화복합발전(IGCC) 시스템에서 합성가스 중에 포함된 황화수소($H_2S$)는 후단의 가스 터빈과 같은 장치의 부식을 방지하고, 합성가스를 이용하는 연료전지 등의 연계 공정에서 요구하는 수준에 맞추어 정제되어야 한다. 본 연구에서는 $H_2S$ 정제공정 추가에 따른 IGCC 시스템의 효율저하를 최소화하기 위하여 고온고압에서 사용가능한 탈황제를 분무건조법을 이용하여 제조하고 제조된 탈황제에 대해 물성 및 황 흡수능 시험을 실시하였다. 형상, 내마모도, 평균입자크기, 충진밀도와 함께 제조된 탈황제가 적용되는 유동층 공정에 적합한 강도를 보유하는지 여부를 미국표준시험방법에 의하여 측정하였다. 황 흡수능은 열중량분석기를 반응기로 사용하여 모사 합성 가스 분위기에서 측정하였다. 분무건조 성형된 탈황제의 일부가 구형이 아닌 타원형 또는 도넛 형태를 나타내고 있어 형상 개선을 위한 제조방법 개선이 필요한 것으로 나타났다. 제조된 탈황제는 기공도가 65% 이상으로 macropore가 기공부피의 대부분을, mesopore가 비표면적의 대부분을 제공하고 있었다. 소성온도를 650 $^{\circ}C$에서 750 $^{\circ}C$로 증가시킴에 따라 대체로 강도가 감소하는 경향을 나타내었다. 열중량분석기로 측정된 황 흡수능은 약 10 wt%로 나타났다. 제조된 탈황제 중 일부는 유동층 공정에 적합한 물성을 보유하고 있었으며 반응성 또한 기존에 개발된 탈황제에 버금가는 성능을 나타내어 향후 공정 적용이 가능할 것으로 분석되었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.5
• /
• pp.254-259
• /
• 2012

The mechanical property enhancement was studied using fly ash produced from fluidized bed type boiler in power plant, which contains a lot of Ca component being used to carbonate for $CO_2$ fixation in the lightweight aggregates made of cement and some portion of fly ash as a cement substitution under the supercritical condition. Specimens having various fly ash substitution rates and curing periods were carbonated under the supercritical condition at $40^{\circ}C$. The weight change rate, carbonation rate by TG/DTA analysis, 1% Phenolphthalein test, specific gravity and mechanical compression strength test were performed to observe the mechanical property enhancement of the cemented materials after carbonation under the supercritical condition and to make sure those could be classified as lightweight aggregates having specific gravity under 2.0.

• Journal of the Korean Chemical Society
• /
• v.44 no.3
• /
• pp.237-242
• /
• 2000

We have synthesized ester compounds from the soybean oil and some Polymer alcohol compounds and studied the physical properties of the synthesized esters. We have performed this experiment for the purpose of testing the physical properties by soybean oil ester compounds as a water-soluble metal working lubricant.In addition, we have studied siy, surface tension, viscosity for the synthesized ester compounds in aqueous solution state varying the mixing ratio of water.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.129-129
• /
• 2000

태양전지는 태양광에너지를 바로 전기에너지로 전환시키는 소자이다. 최근에는 다결정 태양전지의 응용가능성에 대한 연구가 활발히 진행되어 오고 있다. 이 중 CuInSe2는 여러 가지 좋은 물성을 가지고 있어서, 저가의 고효율 태양전지를 위한 광흡수층 재료로 주목받고 있다. 현재까지 다양한 방법이 시도되었지만, 10% 이상의 고효율을 가지는 고품질을 박막을 얻는 방법은 진공증발증착법과 selenization 방법뿐이다. 이 중 진공증발증착법에 의하여 형성된 박막을 이용하여 가장 높은 효율의 태양전지를 얻을 수 있으나, 진공 장비의 대면적화가 힘들기 때문에 대면적 태양전지 제조가 힘들다는 단점이 있다. 따라서 selenization 방법을 이용하여 CuInSe2 박막을 제조하는 것이 가장 유망한 방법이라 할 수 있다. Selenization 방법은 Cu-In 금속층을 제작한 뒤 이를 selenium과 반응을 시키는 방법이다. 따라서 이 방법을 이용하여 박막을 제조할 때는 Cu-In 금속층의 물성 조절이 이후 생성되는 CuInSe2 박막의 물성향상에 필수적이다. 따라서 Cu-In 금속층의 물성에 대해 많은 연구가 이루어지고 있다. 하지만 Cu-In 이 성분계에서 알려진 반가 없다. 저온에서는 반응속도론적으로 매우 느리게 반응이 일어나기 때문에 열역학적으로 안정한 상을 얻기가 힘들기 때문이다. 따라서 본 실험에 앞서 각 제조 조건에 따른 열역학적인 안정상을 계산하였다. 그 결과, 상온에서 Cu의 양이 증가함에 따라, In$\longrightarrow$CuIn2$\longrightarrow$Cu11In9$\longrightarrow$Cu7In3 상으로 변화하였다. 9$0^{\circ}C$이하의 온도에서는 CuIn2 상이 안정하였고, 10$0^{\circ}C$ 이상의 온도에서는 Cu11In9 상 두 가지로 존재하였고, Cu/In 인가전력비를 변화시켰을 때 조성비가 선형적으로 변하였다. 즉, Cu-In 동시스퍼터링법은 원하는 조성을 간편한 방법으로 정확하게 조절할 수 있는 방법이라 할 수 있다. 증착 온도를 변화시켰을 때는 9$0^{\circ}C$ 이하의 낮은 온도에서 존재하던 CuIn2 상이 10$0^{\circ}C$이상의 온도에서는 완전히 사라지고 In과 CuIn2 상이 사라지고 In 상과 Cu11In9 상이 나타났다. 상전이를 위하여 30$0^{\circ}C$의 높은 열처리 온도가 필요한 것은, 밀 저온 안정상이 형성된 뒤 각 원소들의 확산에 의해 상전이가 일어나기 때문에 이를 위한 충분한 열에너지를 가질 수 있는 온도가 필요하기 때문이다. 조성을 일정하게 유지하면서 챔버 압력을 변화시켰을 때는 형성되는 상의 미세구조난 결정성은 일정하였다. 인가전력, 증착온도, 챔버 압력 변화에 따른 상변화는 앞서 계산한 열역학적 결과와 정확히 일치하였다. 이는 동시스퍼터링 방법이 각 입자들을 원소 단위에서 균일하게 혼합할 수 잇는 방법이고, 또 입자들이 높은 에너지를 가지고 있기 때문이다. 즉, 원소 단위에서 균일한 반응을 하고, 가장 안정한 위치로 쉽게 이동할 수 있기 때문에 열역학적으로 안정한 상을 형성할 수 있는 것이다.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.253-261
• /
• 1991

Polyamic acids, precursor polymers of polyimides have been obtained by the solution polycondensation of benzophenone tetracarboxylic dianhydride (BTDA) with 4, 4'-diamino diphenyl methane (MDA) and/or 3, 3'-dimethyl benzidine (OTB). The reaction was carried in two solvent systems such as m-cresol and m-cresol/xylene mixture. The results of TGA analysis showed that the polyimide films had good thermal stability with the initial decomposition temperature ranging from $540^{\circ}$ to $590^{\circ}$. According to DSC analysis of polymers, the glass transition temperature was over $340^{\circ}$. Polyimide film samples, showed good mechanical and electrical properties, had over $16Kg/mm^2$ of tensile strength and about 200 KV/mm of dielectric breakdown voltage. The properties of the copolymer from MAD/OTB were better than those of the homopolymer from MDA. And the polymer synthesized in m-cresol had lower properties than that obtained in m-cresol/xylene.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.119-126
• /
• 2012

Purpose: To study changes in coating and lens materials after chemically etched different polymer based glass lenses in short-term and ambient condition using hydrofluoric acid. Methods: Vinyl ester polymer (Lens A) and thiourethane polymer (Lens B), both dyed in gray 70%, were etched in hydrofluoric acid solution for 5, 10, or 15 min. The mechanical properties, degrees of damages in hard coating, anti-reflection coating, and other coatings, rates of refractive index and light transmission of both polymer types were evaluated. Results: Rates of refractive index of both lens types were not changed significantly after chemical etching. However, anti-reflection coatings and hard coatings were removed and lens surfaces were damaged. As a results, UV light transmission of lenses increased and mechanical properties decreased. Chemical etching notably changed various properties of thiourethane polymer materials. Conclusions: Depending on types of polymer materials, chemical reactions by hydrofluoric acid were dissimilar. Thus, various properties of les materials were altered differently.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.123-126
• /
• 2011

A Fuel-rich preburner using kerosene fuel is operated in a non-equilibrium condition and a prediction of burnt-gas properties is not easy from a chemical equilibrium analysis. A premixed counter-flow flame analysis was conducted for the prediction of burnt-gas properties. JP10 was selected for a representative kerosene fuel and a non-equilibrium combustion analysis was accomplished in supercritical condition using UC San Diego reaction mechanism. The premixed counter-flow flame was assumed for stationary and stable flame, and the temperature result in present study was overestimated rather than the experimental results from Huzel. From the difference of the temperature result, other properties, heat capacity, specific heat ratio and molecular weight had some differences against the experimental results. Moreover, the present results was more similar to the experimental results than those of the equilibrium analysis.

• Elastomers and Composites
• /
• v.36 no.3
• /
• pp.177-187
• /
• 2001

Polypropylene(PP)/polyurethane(PU) blends with reactive compatibilizers were prepared by the compositional quenching process. Maleic anhydride grafted PP(MPP) and hydroxyethyl maleimide grafted PP(HPP) were introduced as reactive compatibilizers. The formation of HPP and the reactions of compatibilizers with the PU components were confirmed by FT-IR spectroscopy. The morphology, tensile properties, thermal stability, and surface property were studied. The blends prepared by the compositional quenching showed better dispersed domain morphology than the melt blends. The PU domain size became more uniform and reduced in size with increasing the amount of compatibilizers. The blends with HPP showed sightly smaller domain sire than the blends with MPP. The blends with compatibilizers all showed improved tensile properties, surface property. and thermal stability due to the interfacial adhesion effect. The blends with MPP showed higher surface energy than the blends with HPP, but the latter showed better thermal stability compared to the former.