• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.622-626
• /
• 1993

비원형기어의 기본적인 특징을 몇 가지 소개하고자 한다. 첫째, 간소한 기구로서 소형화할 수 있고, 둘째, 임의의 부동속 회전 전달을 얻을 수 있으며, 셋째, 맞물린 치면의 미끄럼접촉이 적기 때문에 마모피로가 적고 넷째, 고부하 전달이 가능하다는 장점들이 있다. 본 연구의 목적은 링크, 캠과 같은 동일한 용도에서 사용되는 다른 여러 기구에 비해 많은 이점을 가지고 있는 적합한 타원계 비원형기어(엽형)에서 편평도의 변화에 따른 피치라인을설계하고, 각속비 및 편평도에 따른 형상과 길이의 변화, 물림압력각, 곡률반경등의 연구를 바탕으로 스퍼형과 헬리컬형의 타원계 엽형로타를 AOTOCAD의 script, 3dace를 이용하여 Computer Simulation를 통해 도형화한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.1-10
• /
• 1993

A design method of gear tooth profile which can reduce the noise of gear is studied. The tooth profile is generated by combining involute and cycloid tooth curves in which the involute tooth profile is near the pitch point and cycloid tooth profile at the addendum and the dedendum. Considering parameters which have an influence on the reduction of gear noise and building up a design conditions for the noise reduction of gear, the lower-noise combined gear tooth profile is designed. For the check of noise reduction of the combined gear profile, two pairs of combined profile gear, two pairs of involute gear, and a pair of cycloid gear were manufactured by the NC Wire Cutting Machine, and the experiment for measuring of gear noise was carried out on each pair. The noise reduction of the combined profile gear was obtained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1593-1598
• /
• 2011

The purpose of this study is to perform parameter selection and develop a method for the condition monitoring of an LCD conveyance robot. To determine the vibration characteristics of the driving part of the robot, the gear mesh frequency (GMF) of the speed-reducing gearbox is calculated and confirmed by frequency analysis. In order to ensure reproducibility of the measured data, an appropriate working pattern is selected and experiments are carried out. For condition monitoring of the robot, a wireless measurement system is constructed and used in parameter selection, with the GMF as the center. A method involving the use of the standard deviation of the measured data and another method involving the use of multiple value of amplitude are proposed.

• Tribology and Lubricants
• /
• v.1 no.1
• /
• pp.69-79
• /
• 1985

EHD(elastohydrodynamic) lubrication theories are applied to analyse the contact characteristies between the circular are profiled teeth of the plano-wheel gear and the cylindrical pin type teeth of the inner gear for the planocentric gears unit, For improving lubrication characteristic and contact frictional interference between the teeth, a new design method of optimising continuous meshing position is introduced, and the new tooth profile which is modified as a rounded curvature of the edge of circular arc is also suggested. The results of mathematical computation from conventional and the modified gear unit are compared, respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.1
• /
• pp.41-46
• /
• 2011

In this paper, we experimentally investigate factors that decrease in noise of a industrial take-out robot at driving state. For this, we analyse change in the noise of the take-out robot with gear machining accuracy and clearance. In order to calculate the noise related to gear machining accuracy that is based upon the Japanese Industrial Standard(JIS), we equally increase motor speed from 0 rpm to 1250 rpm. In addition, to investigate influence of clearance on noise, we evenly change clearance from 0.5 mm to 1.2 mm. These experiments show that clearance is more effective factor than gear machining accuracy to reduce the noise of the take-out robot.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.67-75
• /
• 1997

The noise . vibration characteristics of Hypoid gears which were made from three seperate materials(SCM, TSCM, SNCM) under the identical process were investigated for the sake of durability improvement of differential gear compatible with low level noise gear set. For this study, we developed a rig experimental equipment which can perform close noise.vibration experiment of differential gear. Consequently, we could analyze the noise.vibration characteristics of final reduction gear by materials, and also we observed changes in both metallic structure and hardness according to the materials of pinion gear. In addition to this, the correlation between the vibration of the differential gear and the interior noise of the passenger vehicles was proved by analyzing the results of rig vibration experiment and field noise test.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.111-118
• /
• 2000

Over tightening experiments of the tension-controlled bolts are carried out and the stripping mechanism is reviewed base on the observed results. There are two modes of bolt failure due to the over tightening : one the fracture of the bolt the other the thread stripping Bifurcation between these two modes is rather delicate but it seems being related with the elastic flexibility of the bolt which depends upon the unused thread length. The fracture mode occurs in the bolts with good flexibility while the latter with bad one. According to the ISO Standard some meter coarse threads like M20 and M22 have the same pitch which causes bigger fastener to less resistance in shear and bending compared with the smaller one. however since UNC thread system adapts different pitch for different nominal diameter unified coarse threads show better stripping resistance than their corresponding meter threads.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.803-806
• /
• 1995

The vibration and nosic of gears is causeed by manufacting error,alignment error in assembly, and thr meshing stiffness of gears which changes periodically as the meshing of teeth process. On a pair of power transmission helical gears with profile error, the relation between the characteristics of gear vibration and the profile error type have been investigated by simulating the vibrational acceleration level and calculating the natural frequency. The results show that the profile error decrease the natural frequency by reducing the tool stiffness and that the concave error type increase the vibrationsl level. And this paper describes the effect of the tip relief on the vibrational acceleration level which a pair of helical gears with concave error generates.

• Social Workers
• /
• no.3 s.35
• /
• pp.32-35
• /
• 2005

사회복지공동모금회에 의하면 지난 '희망 2005 이웃사랑캠페인'에서 전년보다 개인기부나 기업기부가 각 60% 이상씩 늘어났다고 한다. 경제가 최악이라고 다들 말하지만 국민들의 따뜻한 마음은 최악이 아니였던 것이다. 이렇게 모인 금액은 우리가 흔히 말하는 불우이웃, 즉 빈곤층과 소외계층에 나누어져 지원된다. 그런데 문제는 이러한 분위기가 정부보다는 국민들에게 더 강하게 어필되고 있는 느낌이다. 우리나라 빈곤층은 1997년 경제위기 이후 급격히 늘어 1999년 정점에 이른 뒤 2000년부터는 감소추세였다. 그러나 2003년 기점으로 절대빈곤률과 상대빈곤률이 다시 높아지고 있으며, 특히 상대빈곤층은 최악의 상태였던 1999년보다 높아졌으며 중산층은 줄고 고소득층은 늘어 사회가 양극화 되고 있다. 가난의 굴레를 벗어나기가 쉽지 않다고는 하지만 그나마 사회안전망이라 할 수 있는 국민기초생활보장제도도 빈곤층에게 인간다운 아름다운 삶을 보장받게 해주지 못하고 있는 것이 사실이다. 또한, 정부의 복지정책의 근간이 되는 기본 실태조사좌도 그 신뢰성에 문제로 제기하고 있는 현 상황과 대책을 알아보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1231-1237
• /
• 1999

Applying the conjugate contact condition, contact lines of a cylindrical worm gear has been calculated. The characteristics of tooth contact were analyzed and the pitting resistance were also assessed. It has been verified that: i) the length of contact is shortest on the 1st tooth of the front region, ii) the contact region is more narrow in the recess side than in the access side, iii) the contact region is more narrow in worm than in worm wheel. Hence, the pitting resistance is weakest in the recess side of the 1st contacting worm tooth.