• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.949-952
• /
• 2008

화재안전 신뢰성이 확보된 고강도 콘크리트 구조물의 시장 공급을 위하여 GS건설에서는 2005년 부터 고강도 콘크리트 구조물의 강도 영역별 폭렬 저감 및 거동 안전성 평가와 수치해석 방법을 통한 경제적인 설계방법를 최종 연구목표로 하여 현재까지 콘크리트 재료의 열적 특성 확보와 구조부재 화재 특성 연구를 수행해 왔다. 강도발현, 시공성, 내화성능과 경제성에 대한 분석을 해외연구 기관에 의뢰하여 섬유혼입공법을 선정한 후 이에 대한 재료의 물리적 특성과 역학적 특성 실험결과를 바탕으로 고강도 콘크리트 구조부재의 내화성능을 예측 분석할 수 있도록 비열 모델, 열전도율모델, 압축강도 모델, 탄성계수 모델을 구축하였다. 또한 기둥과 보에 대한 내화실험을 실시하여 내화성능을 평가하였으며, 이에 대한 열적 해석을 병행하여 진행하였다.

• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.83-101
• /
• 2021

The high-density polyurethane method uses the instantaneous expansion pressure of injected material to stabilize soft ground, allowing reinforcement, restoration, and construction to be carried out in suboptimal ground conditions. Under normal and, even poor conditions, the method is easily applied because the working time is very short. The method is environmentally friendly and results have excellent durability. The purpose of this study was to verify the physical and mechanical properties of high-density polyurethane in the ground. Initial testing of strength, direct shear, and soil environment stability was followed by testing for permeability in order to address environmental concerns. The results of the experiments showed that the internal friction angle was about twice as high and the adhesion was about 2.5 to 3.5 times higher than for dense and hard clay, and that the permeability factor was significantly lower compared with the existing grouting method, within the range of 1.0 × 10-5.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.78-78
• /
• 2010

그래핀(Graphene)은 탄소원자가 육각형 벌집(honeycomb)구조로 빼곡히 채워진 2차원의 단원자 층으로 역학적 강도와 우수한 화학적/열적 안정성 및 흥미로운 전기 전도 특성을 가지고 있다. 이러한 그래핀의 우수한 특성으로 인하여 현재 기초연구뿐만 아니라 응용연구 등 많은 연구들이 진행되고 있다. 일반적으로 그래핀의 우수한 물리적 특성들은 그래핀의 층수, 모서리(edge)구조, 결함(defect), 불순물 등에 의해 크게 좌우되는 것으로 알려져 있다. 따라서 그래핀의 구조 및 결함정도를 자유로이 제어하고 그에 따르는 특성 변화를 관찰하는 것은 기초연구의 측면에서 뿐만 아니라 향후 그래핀 응용에 있어서도 매우 중요하다고 할 수 있다. 본 연구에서는 그래핀의 내산화 특성을 연구하기 위하여, 그래핀을 열 및 플라즈마 산화 분위기에 노출시킨 후, Raman 분광법을 이용하여 광학적, 구조적 변화를 분석함으로써 그래핀의 내산화 특성에 대하여 조사하였다. 그래핀은 실리콘 웨이퍼에 전자빔증착법으로 니켈박막을 증착한 후 열화학증기증착법으로 합성하였으며, 메탄가스를 원료가스로 $900^{\circ}C$ 전후에서 합성하였다. 합성한 그래핀은 산화반응 시 기판의 영향을 제거하기 위하여 트렌치 구조의 기판 위에 전사(transfer)함으로써 공중에 떠있는 구조를 구현하였다. 열 산화의 경우, 합성한 그래핀을 대기분위기의 고온($500^{\circ}C$) 챔버에 넣고 처리시간에 따른 특성변화를 살펴보았다. 플라즈마 산화의 경우는 공기를 이용하여 직류플라즈마를 발생시킨 후 0.4 W의 낮은 플라즈마 파워를 이용하여 플라즈마 산화처리와 특성평가를 매회 반복하였다. 그래핀의 특성분석은 Raman분광기와 광학현미경, 원자힘현미경(AFM) 등을 이용하여 분석하였으며, 상기 결과들은 향후 산화환경에서의 그래핀 응용소자 개발에 유용할 것으로 예상된다.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.12
• /
• pp.71-78
• /
• 2011

This paper aims to present the evaluation of engineering characteristics and reusing possibility of waste powders produced in dolomite and limestone nonmetal mining by physical and mechanical experiments on compaction, uniaxial compressive strength, permeability, chemical composition, and so on. Granite soil, 2 types of limestone waste powder, and 1 type of dolomite waste powder were used for main materials, and cement and bentonite were used for admixed materials in this experiments. The findings based on the experimental results are the severe difference of chemical composition of the dolomite & limestone waste powder and the crushed rock waste powder, and the outstanding of engineering characteristics of the dolomite waste powder with high content of MgO compared with the limestone waste powder. The engineering properties on compaction, uniaxial compressive strength, and permeability are enhanced with increase of admixed ratio of waste powder on granite soil. From the experimental results, it can be suggested that the dolomite waste powder admixed with in-situ granite soil is useful as geo-materials with considering of distribution costs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.429-439
• /
• 2000

This study was aimed to investigate the handle and mechanical properties of silk woven fabrics according to the fabric structure and yarn types 56 male and female students evaluated 16 black specimens with semantic differential scale of 20 hand adjectives. Mechanical parameters such as surface properties, bending properties and compression properties were tested using by KES-FS system. Data were analyzed through factor analysis, pearson correlation coefficient and t-test using PC SAS package. The results were as follows: The hand adjectives were grouped as 4 'surface roughness', 'flexibility', ;sense of thermal', and 'dryness'. 'Surface roughness' was highly sensed at satin fabrics of hard-twist yarn, noil yarn and spun yarn, while it was not at the fabrics of normal satin and twill at all. 'Flexibility' was reverse to 'surface roughness'. Thermal sense was felt highly at satin fabrics of noil-yarn, while low at plain fabrics of normal yarn. 'Dryness' was high at satin fabrics of hard-twist yarn and while it was low at normal satin fabrics. Predicted equations for subjective hand from mechanical properties of fabrics were developed using Stevens's law and stepwise regression and the coefficients of determination were high.

• Science of Emotion and Sensibility
• /
• v.5 no.2
• /
• pp.23-28
• /
• 2002

The purpose of this study was to classify apparel fabrics according to rustling rounds and to analyze their transformed colors and mechanical properties. The rustling sounds of apparel fabrics were recorded and then transformed into colors using Mori's color-transforming program. The specimens were clustered into five groups according to sound properties, and each group was named as ‘Silky’,‘Crispy’,‘Paper-like’,‘Worsted’, and ‘Flaxy’, respectively. The Silky consisted of smooth and soft silk fabrics had the lowest value of LPT, $\Delta$f, ARC , loudness(B) and sharpness(z). Their transformed colors showed lots of red portion and color counts. The Crispy with crepe fabrics showed relatively low loudness(z) and sharpness(B), but diverse colors and color counts were appeared. The Paper-like showed the highest value of LPT, $\Delta$f and loudness(z). The Worsted composed of wool and wool-Like fabrics showed high values of LPT, $\Delta$f, loudness(z) and sharpness(B). The transformed rotors of the Paper-like and Worsted showed the blue mostly but color counts were less than the others. The Flaxy with rugged flax fabric had the highest fluctuation strength, and their transformed colors showed diversity.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.47-59
• /
• 2023

In this research, laboratory tests were conducted on clayey sand (SC) to analyze its physical properties, compaction/permeability characteristics, and stress-strain behavior. The main objective was to determine the transitional fines content at which the mechanical properties of sand transition to those of clay, resulting in a change in the geotechnical behavior of the material. Additionally, to assess the practical applicability of SC soil, field data from a soft ground improvement site with significant settlement issues were collected. The settlement characteristics derived from laboratory tests and numerical simulations were then compared and analyzed in relation to the actual settlement data obtained from the field, aiming to evaluate the suitability of the SC soil as a compaction target layer. The laboratory tests and compaction analysis showed that the SC soil exhibited a distinct change in mechanical properties, shifting from sandy behavior to clayey behavior when the fines content exceeded 25%. This transition in mechanical behavior was found to be closely correlated with the content of clay particles within the material. Through numerical simulations of the soft ground site, it was verified that the use of clayey sand with a fines content exceeding the transitional level as a compaction target layer resulted in settlements that closely aligned with the measured settlements, with an average agreement of 91.2%. Based on these findings, it is deemed advisable to incorporate clayey sand with a fines content exceeding the transitional level as part of the compaction target layer in the design of soft ground improvements.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.468-468
• /
• 2016

3차원 동수역학 모델을 이용하여 연안 순환에서 발생하는 이안류의 연직 분포를 조사하였다. 이안류 흐름은 변수심 위에서 발생하는 파의 쇄파와 모멘텀 전달에 의해 발생하는 외해방향의 흐름을 의미하는 것으로 해안의 보전, 유지 및 개발 측면에서 매우 중요한 역할을 한다. 지난 수십년동안 이안류와 관련된 현상을 해석하기 위해 많은 연구들이 수행되어 왔다. 하지만 대부분의 연구들은 수심적분된 2차원 모델을 사용하거나 위상 평균된 3차원 모델을 사용하여 이안류 흐름이 발생할 시 유속의 3차원 분포나 각 종 물리량의 시간적인 변화 등을 모의하기 어려웠다. 본 연구에서는 3차원 동수역학 모델 NHWAVE (Non-Hydrostatic WAVE model)을 이용하여 이안류의 연직분포를 조사하였다. 이안류를 발생시키기 위하여 이상적인 이안류 지형을 만들었으며 여러 지점에서 연직분포를 측정하여 수심적분된 Boussinesq 모델과 비교하여 특성을 파악하였다. 수치모의 수행결과, 두 모델 모두 이안류 현상을 잘 재현하였으나 Boussinesq 모델은 수평유속의 연직방향 변화를 잘 재현하지는 못하였다. 또한, 파고가 상대적으로 큰 경우에는 3차원 모델에서는 작은 순환류가 외해 영역에서 발생하였으나 Boussinesq 모델에서는 관측하지 못하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.339-340
• /
• 2010

This study was performed an evaluation of physical & mechanical properties of porous concrete according to contents of pumice. As the results of study, when considering the void ratio, permeability coefficient, compressive strength of porous concrete, the proper content are thought to be 10~20%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.359-360
• /
• 2010

This study was performed an evaluation of physical & mechanical properties of mortar & concrete by fineness of slag cement. As the results of study, strength of mortar and concrete tended to improve as the fineness of slag cement increased and when considering early strength and 28days strength, the proper content fineness of slag cement was thought to be $5,000cm^2/g$.