• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1716-1720
• /
• 2006

침투는 지반이 충적토로 구성되어 있는 제방의 파괴를 야기하는 중요한 원인이다. 침투 해석 수치모형은 제방 침투와 관련된 문제 해석과 방지기법 설계에 있어 매우 유용한 방법이나, 각각의 수치모형은 적용상 한계와 문제점을 내포하고 있다. 실제 지하수 흐름은 간극률, 입자형상 및 크기, 포화도 등과 같은 토질특성, 내부침식과 같은 역학적 특성, 점성과 동결융해 같은 열역학적 특성, 그리고 화학적 특성 등 다양한 인자의 영향을 받는다. 이러한 물리적 인자 이외에도 침투 수치해석은 외력조건, 격자 크기(element size), 그리고 시간 간격(time step interval) 등 입력조건에 영향을 받기 때문에 이들 설정에 대한 검토를 시행하여야 한다. 본 연구에서는 침투 수치모형의 적절한 입력조건 범위를 검토하였으며, 격자크기는 계산시간과 해석결과 등 수치모의의 효율성을 고려하였을 때 홍수위 혹은 제방고의 1/10이하로 결정하면 타당할 것으로 판단된다. 그리고 침투수치모형의 시간 간격은 외력조건을 고려하여 1시간 이내로 설정하는 것이 바람직할 것으로 판단된다. 본 연구결과는 침투해석 수치모의의 유의사항을 검토하여 해석결과에 대한 불확실성과 위험요소를 제거하는데 도움이 될 것으로 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.327-327
• /
• 2012

사파이어는 우수한 광학적, 물리적, 화학적 특성을 가지고 있는 물질 중의 하나이며, 청색 발광특성을 나타내는 GaN와 격자상수, 열팽창 계수가 가장 유사할 뿐만 아니라 가격도 상대적으로 저렴하기 때문에 GaN 성장을 위한 기판으로 사용될 수 있다. 실제로 사파이어는 프로젝터와 전자파 장치, 군사용 장비 등 다양한 분야에 응용되고 있으며, 발광 다이오드(LED)를 위한 기판으로 활용됨으로써 그 수요가 급격히 증가하고 있다. 그러나 사파이어 결정의 성장 중에 생길 수 있는 전위(dislocation)와 적층결함(stacking fault) 등의 결정 결함들은 결정 내에 존재하여 역학적, 전기적 성질에 큰 영향을 미칠 수 있다. 특히 사파이어가 청색 발광소자의 기판으로 사용되는 경우, 사파이어 기판 내부의 결정 결함은 증착되는 박막 특성에 영향을 미치게 된다. 따라서 사파이어의 보다 나은 응용을 위해서는 결정 결함에 대한 평가기술과 결함의 형성 메커니즘 등에 대한 이해가 필요하다. 특히, 결함의 정량적 평가 기술의 개발은 사파이어의 상용화에 중요한 핵심요소 중 하나이다. 결정을 산이나 염기 등을 이용하여 화학적 식각을 하게 되면 분자나 원자 간의 결합이 약한 부분이나 높은 에너지 상태에 있는 부분부터 반응을 하게 되는데, 이러한 반응을 통해 결정의 표면에 형성되는 것을 에치 피트(etch pit)라고 한다. 일반적으로 결정 내에 존재하는 전위는 높은 에너지 상태이므로, 이러한 에치 피트는 전위와 관련되어 있다. 따라서 사파이어 결정과 같은 결정질 물질은 표면의 식각을 통하여 관찰되는 에치 피트 등의 형상이나 반응성 등을 평가하여 결정 특성을 연구할 수 있다. 본 연구는 화학적 식각법으로 사파이어 결정의 특성을 평가하기 위하여 진행하였다. 사파이어 결정의 식각을 위하여 다양한 산-염기 용액들이 사용되었다. 식각 용액의 종류에 따른 사파이어 결정의 식각거동을 연구하고, 표면에 나타나는 형상을 연구하여 사파이어 결정의 구조적 특성을 파악하였다. 특히, 에치 피트 형성거동의 시간 및 온도 의존성에 관한 연구를 진행하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.107-111
• /
• 2008

As high-rise buildings with 100 or more stories are being constructed, it is inevitable to use high-performance materials including high-performance concrete. What is most important in high-performance concrete is extremely high strength in order to reduce the section of members in high-rise buildings. During the last several years, there have been active researches on Ultra-high-strength concrete. While these researches have been mostly focused on strength development, however, other accompanying physical properties have not been studied sufficiently. Thus, this study purposed to obtain and analyze data on the physical-mechanical properties of Ultra-high-strength concrete through experiments and to use the results as basic information on required performance of concrete used in high-rise buildings.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.67-73
• /
• 2006

In this study, basic physical tests and mechanical tests of crushed rock were performed in order to investigate the field application of crushed rock as substitute materials of sand that is commonly being used as foundation and backfill materials of sewer conduit. Particle-size distribution curve of crushed rock is similar to sand and also it is well-graded soil than common sand. Maximum dry unit weight in proctor compaction test for crushed rock is higher than the values of common sand. So we can estimate that the crushed rock has advantages in workability than sand for the backfill compaction after construction of sewer conduit. When we investigate the results of direct shear test and triaxial compression test on the crushed rock, it has a similar value of shear strength parameters to sand at the same stress state and as time goes by, it tends to increase the unconfined compression strength. But, because the strength reaches at the constant value after 6~7 days, we expect that it can absorb the lateral strain of flexible conduit well. All the above experimental results just proves that crushed rock can substitute for sand as backfill materials and foundation of sewer conduit.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.197-202
• /
• 2005

The electromagnetic signals associated with the seismic activity in the south-east offshore of Kii peninsula, Japan, were clearly recorded at the MT sites in Jeju island, Korea. In this research, we have identified the co-seismic electromagnetic signals associated with the seismic activity and have analyzed the characteristics of significant electromagnetic variations. The analysis of phase velocity, power spectral density, MT impedance and polarization direction shows that the significant earthquake signals have the frequency band of about 0.05 to 0.5 Hz and that the sources of electromagnetic field are local effects of passing seismic waves. The simple approximation using electrokinetic effect successfully explains the co-seismic EM signals coincides with measured data but cannot explain the localities of electromagnetic variations.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2008

Many problems exist in the current cast in place concrete lining used in domestic tunnel construction. Especially, the crack of tunnel lining brings about a social and economic problem. It has a lot of influence on stability of structure and the fine finish of lining. So enormous repair-work and reinforcement of tunnel lining could occur an running out of government's budget. In our country, there are domestic production enterprises which produce a special pre-cast concrete product, but the technical level of them is still far behind compared to developed countries. Also, optimum steam coring method is important for the production of high quality product. But there is no regulation of steam curing method in our country. This study is to investigate the properties of PC panel according to the variation of steam curing conditions such as presteaming time and rate of temperature rise. The result shows that the optimum presteaming time of steam curing method in PC panel is more than 1 hour and the desirable rate of temperature in curing chamber is about $20^{\circ}C/hr$.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.105-116
• /
• 2001

This study was performed to evaluate the characteristics of waste foundry sand (WFS) and the asphalt mixture made of a foundry waste sand. To estimate the applicability of WFS, chemical and physical properties were measured by XRF(X-ray fluorescent), and SEM(Scanning electronic microfilm). To improve the stripping resistance of WFS asphalt mixture, anti-stripping agents (a hydrated lime and a liquid anti-stripping agent) were used. To improve tensile properties and durability of WFS asphalt concrete mixture, LDPE(low-density polyethylene) was used as an asphalt modifier Marshall mix design, indirect tensile strength, tensile strength ratio(TSR) after freezing and thawing, moisture susceptibility and wheel tracking tests were carried out to evaluate performance of WFS asphalt concrete. Comparing with conventional asphalt concrete, WFS asphalt concretes showed similar or the better qualify in mechanical properties, and satisfied all specification limits. Therefore, it Is concluded that waste foundry sand can be recycled as an asphalt pavement material.

• Journal of The Korean Association For Science Education
• /
• v.20 no.1
• /
• pp.77-87
• /
• 2000

The purpose of the study is to understand the change process of middle school students' physics conceptions by the presented types of conflict situations. 274 middle school students were selected from one school in Pusan, however 257 students were participated in all the procedure of the study. After we classified students' physics conceptions into scientific and unscientific conceptions, presented three types of conflict situations. In this study three different cognitive conflict strategies were adopted; the first one is logical arguments(LCS: logical conflict situation), the second is actual demonstration(DCS: demonstrational conflict situation), and the third is two strategies together(DLCS). In this study, first, we investigated the change process of students' physics conceptions by three types of conflict situations. Second, we compared the effect of three conflict situations presentation, which includes positive effect by conceptual change from misconception to scientific conception and negative effect by conceptual change from scientific conception to misconception. Third, we studied characteristics of conceptual change by characteristics of conflict situations. In result, DLCS group and DCS group were more positive effect than LCS group in mechanics, DLCS group and LCS group were more positive effect than DCS group in electricity. It seems that mechanics are closely related to physical experiences, while electricity are more abstract.

• Journal of the Korean Magnetics Society
• /
• v.14 no.2
• /
• pp.83-88
• /
• 2004

Magnetism of molecular nanomagnet, which attracted a lot of academic attention after the discovery of the macroscopic quantum tunneling of magnetism, is reviewed. Molecular nanomagnet is metal-organic material in which magnetic ions are regularly located in the organic skeleton. Also, the interaction between the molecules is very small and those molecules form macroscopic molecular crystal in which molecules are residing at the element points in the crystal. Molecular nanomagnets show a lot of interesting features, especially, equivalence of macroscopic magnetic properties and molecular magnetic properties. In this paper, research results on molecular nanomagnet with microscopic tool like NMR are reviewed mainly. The new method to observe the quantum tunneling of magnetization discovered in Mnl2-ac with NMR is shown and the research results on the microscopic aspects of the macroscopic quantum tunneling of magnetization using the new method are shown. Also, the physical aspect of the level crossing effect which has been reported originally with NMR in molecular nanomagnet is reviewed with experiment results. The research results on the molecular nanomagnets will reveal the important information about the limit of the miniaturization of magnetic memory units and give us the basic scientific knowledge which is needed for the application for the quantum computation. Moreover, academically, many quantum mechanical theories which have not been checked the validity can be checked with experiments.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.20-28
• /
• 2013

Recently, as the registration of vehicles increases, the utilization of the waste tires is emerging as environmental issues. Crumb rubber reproduced by scrap tires has been reused up to 25% in the construction field. The purpose of this paper is to investigate the mechanical properties of sulfur-rubber concrete (SRC) and to suggest the optimum mix design in terms of the compressive strength. Specimens were prepared with various mixing parameters: amount of sulfur, rubber, and micro-fillers. Two casting processes were also mentioned; dry process and wet process. The results mainly showed that the compressive strength of SRC decreased with an increment of rubber content. However, adding micro-filler and adjusting sulfur contents could improve the compressive strength of SRC. Optimum values of sulfur and rubber content were selected by workability and compressive strength of SRC. SRC can be applied to road constructions where high strength of concrete is not concerned, to wall panels that require low unit weight, to construction of median in highways to resist high impact load, and in sound barriers to absorb sound waves.