• Water for future
• /
• v.53 no.1
• /
• pp.15-22
• /
• 2020

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.629-646
• /
• 2023

Host rock of Cheonjeon-ri petroglyph is shale belonging to the Daegu Formation of Cretaceous Gyeongsang Supergroup. The rocks were hornfelsified by thermal alteration, and shows high density and hardness. The petroglyph forms weathered zone with certain depth, and has difference in mineral and chemical composition from the unweathered zone. As the physical deterioration evaluations, most of cracks on the surface appear parallel to the bedding, and are concentrated in the upper part with relatively low density. Breakout parts are occurred in the upper and lower parts of the petroglyph, accounting for 6.0% of the total area and occurs to have been created by the wedging action of cracks crossing. The first exfoliation parts occupying the surface were 23.8% of the total area, the second exfoliations covered with 9.3%, and the exfoliation parts with three or more times were calculated as 3.4%. It is interpreted that this is not due to natural weathering, and the thermal shock caused by the cremation custom here in the past. As the ultrasonic properties, the petroglyph indicates highly strength in the horizontal direction parallel to bedding, and the area with little physical damage recorded mean of 4,684 m/s, but the area with severe cracks and exfoliations showed difference from 2,597 to 3,382 m/s on average. Physical deterioration to the Cheonjeon-ri petroglyph occurred to influence by repeated weathering, which caused the rock surface to become more severe than the inside and the binding force of minerals to weaken. Therefore, it can be understood that when greater stress occurs in the weathered zone than in the unweathered zone, the relatively weathered surface loses its support and exfoliation occurs.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.321-328
• /
• 2012

A $SO_2$ gas acceleration test was carried out on four textile groups (silk, cotton, ramie cloth, hemp cloth) which were categoried in five categories by the dyeing materials (undyed, red, yellow, blue, black) and the relation between the concentration of $SO_2$ and deterioration rate was evaluated. The textiles were exposed to 0.01, 0.12, 1, 10, 100, 1000, and 5000 ppm of $SO_2$ for 24 hours and the optical, physical, and chemical deterioration rates were studied. An optical change was identified as the color difference and grey scale rating (colorfastness) enhanced with the increase of gas concentration while there was little physical change. Chemical damage was caused by the acidification of the textile material due to the trapped sulfate ion concentration. The result of optical, physical, and chemical deterioration rates shows that 1 ppm/day $SO_2$ is a critical level of deterioration of traditional textiles.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.133-139
• /
• 2018

Chemically damaged hair is vulnerable to external stimuli in daily life due to the weakened physical properties of the hair strand itself. The purpose of this work was to determine whether chemical conjugation between hair keratin proteins restores tensile strength and thus results inpreventing further deterioration under repeated combing. A model damaged hair tress was produced by a typical perm-process. Then, it was internally crosslinked by the bifunctional crosslinker (3-aminopropyl)triethoxysilane (APTES), via both silane coupling and carbodiimide chemistry. Physical properties, including tensile strength, Young's modulus, and plateau stress, were measured to verify the effect of internal crosslinking, and the existence of crosslinking was verified by Fourier transform infrared (FT-IR) spectroscopy. The degrees of hair breakage and split ends were evaluated by repeated combing-drying tests. Physical properties of chemically damaged hair were restored by internal crosslinking. Successful crosslinking of APTES via both silane coupling and carbodiimide chemistry was verified by FT-IR spectra. Prevention of breakage and split ends after repeated combing with heat was observed. Human hair can be weakened by chemical damage including perm-processing, so restoring such properties is a major issue in the hair care industry. This work shows that internal crosslinking of damaged hair via chemical conjugation would be a potent method to restore the healthy hair.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2007

Tunnel management is a time-consuming and expensive task. In particular, visual analysis of tunnel inspection often requires extended time and cost and shows problems on data gathering, storage and analysis. This study proposes a new approach to extract information for tunnel management by using a laser scanning technology. A prototype tunnel laser scanner developed was used to obtain point clouds of a railway tunnel surface. Initial processing of laser scanning data was to separate those laser pulses returned from the installations attached to tunnel liner using radiometric and geometric characteristics of laser returns. Once the laser returns from the installations were separated and removed, physically damaged parts on tunnel lining are detected. Based on the plane formed by laser scanner data, damaged parts are detected by analysis of proximity. The algorithms presented in this study successfully detect the physically damaged parts which can be verified by the digital photography of the corresponding location on the tunnel surface.

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.81-86
• /
• 2015

Intense pulsed light (IPL), a nonthermal technology, has attracted increasing interest as a food processing technology. However, its efficacy in inactivating microorganisms has not been evaluated thoroughly. In this study, we investigated the influence of IPL treatment on the inactivation of Escherichia coli O157:H7 depending on light intensity, treatment time, and pulse number. Increased light intensity from 500 V to 1,000 V, raised the inactivation rate at room temperature. At 1000 V, the cell numbers were reduced by 7.1 log cycles within 120 s. In addition, increased pulse number or decreased distance between the light source and sample surface also led to an increase in the inactivation rate. IPL exposure caused a significant increase in the absorption at 260 nm of the suspending agent used in our experiments. This indicates that IPL-treated cells were damaged, consequently releasing intracellular materials. The growth of IPL-irradiated cells were delayed by about 5 h. The degree of damage to the cells after IPL treatment was confimed by transmission electron microscopy.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1374-1375
• /
• 2006

Ar/$Cl_2$ 유도결합 플라즈마 (ICP)의 가스 혼합비에 따른 $(Bi_{4-x}La_x)Ti_{3}O_{12}$ 박막의 식각 메커니즘과 식각면에서의 플라즈마 손상을 조사하였다. BLT 박막의 최대식각률은 Ar/$Cl_2$ 플라즈마에서의 Ar 가스 혼합비가 80%일 때 50.8 nm의 값을 보였다. 정전 탐침을 통해 Ar 가스의 혼합비에 따른 전자온도와 전자밀도를 관측하였다. 박막 표면의 X-ray photoemission spectroscopy 분석과 박막의 이력곡선을 통해 BLT 박막의 식각 손상은 Cl 원자와의 반응에 의한 화학적 식각 손상이 BLT 박막 표면에서의 Ar 이온충돌에 의한 물리적 손상보다 더 크다는 것을 확인 할 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.56-56
• /
• 2003

플라즈마 식각에서 물리적 손상과 전기적 손상은 차세대 Nanoscale 소자와 Deep - Submicron 반도체공정에서 해결되어야 할 가장 큰 문제 중 하나이다. 이 중 전기적인 손상을 줄이기 위한 몇 가지 무손상 공정이 제시되고 있으며, 그러한 기술 중의 하나가 이온빔의 Low Angle Forward Reflection을 이용한 식각방법이다. Low Angle Forward Reflection방법은 이온소오스로부터 발생시킨 이온을 Low Angle 에서 Reflection-시켜 이온빔을 중성화되도록 하는 방법으로, 이전 연구를 통해 Reflection시 입사각이 5도일 경우 대부분의 이온들이 중성화되는 결과를 얻었다. 또한, 실험에 사용된 $SF_6,{\;}NF_3,{\;}CF_4$와 같은 모든 가스종에서 유사한 값의 중성화 정도를 관찰할 수 있었으며, 이러한 가스를 이용하여 $Si0_2$ 식각시 Vertical한 Profile 결과를 얻었다. 본 연구에서는 기존 Grid 장치에서 이온소오스 부분에 Low Angle Forward Reflected Neutral Beam을 위한 판형 Reflector를 부착하였으며, 이에 따라 중성빔의 Flux가 크게 향상되며 Beam의 직진성을 향상시킬 수 있었다. 또한, F계열 가스를 이용한 실험을 통해 $Si0_2$ 식각율과 식각특성 면에서 향상된 실험결과를 얻을 수 있었다.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.251-260
• /
• 2011

This study focus on the suggestion of standard legend, the process system on making method of deterioration map, the development of crack index (CI), and the evaluation techniques of surface and 3D deterioration rate for stone cultural heritage. The standard legends of deterioration forms were made using a common graphic program after crack, blistering, scaling, break-out, granular disintegration, and perforation were subdivided. The deterioration map improved accuracy and reliability on deterioration range using 3D digital restoration and high resolution photograph mapping technique. Also, quantitative deterioration evaluation of stone cultural heritage was carried out developing the crack index, and the 3D deterioration rate of a break-out part was calculated by virtual restoration modeling. As a quantitative deterioration evaluation of Magoksa Temple stone pagoda based on the results described above, the north face showed high deterioration rate of bursting crack (1.70), hair crack (1.34), scaling (20.2%) and break out (13.0%), and the 3D deterioration rate of first roof stone was 6.7%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.679-690
• /
• 1998

미국 오하이오주 남서쪽에 위치한 Seip 토루군(100 B.C.-A.D. 500경)의 출토유물들에 대하여 현미경으로 관찰되는 인피섬유의 형태학적 손상을 분석하였다. 형태학적 손상이란 외부로부터의 물리적 혹은 화학적 요인에 의해 섬유은 표면과 내면에 발생하는 형태변형을 말한다. Seip직물에 포함된 인피섬유의 형태학적 손상 정도는 본 연구를 위해 제작된 인피섬유손상지로(IBFM)의 점수의 합으로 나타내었다. Seip직물들은 육안으로 보았을 때 우선 숯과 같이 검은 색을 띄고 있는 직물들과 그렇지 않은 직물군으로 분류되었는데 발굴보고서에 설명된 시신과 관련 부장품들의 수습상황으로 미루어 볼 때 검게 된 직물군은 부분적으로 하장된 시신의 부장품이었으며 검게 되지 않은 직물군은 일반매장된 시신의 부장품으로 보였다. Seip직물들은 다시 서로 다른 조직에 따라 분류되는 직물군으로 나뉘어 질 수 있었는데 본 연구에서는 이들 중 가장 빈번히 보이는 교차쌍 위사 트와인조직(Spaced alternate-pair weft-twining)으로 만들어진 직물군과 그 밖의 조직으로 되어 있는 직물군으로 나누고 이들을 각각 얼터씨이트(Alternate)와 기타조직(Pooled)으로 명명하였다. 본 연구에서는 Seip직물들 간에 매장법에 의해 손상정도의 차이가 발생했으며 특히 부븐적으로 화장된 직물과 그대로 묻혀진 직물들 간에 섬유손상 정도의 차이가 있었을 것으로 좌고 이를 확인하기 위해 검게된 직물군과 검게 되지 않은 직물군 간에, 그리고 얼터네이트와 기타조직으로된 직물군들 간에 IBFM 점수의 차이가 있는지 조사하였다. 섬유의 형태학적 손상은 광학현미경과 주사전자현미경을 사용하여 분석하였으며 분석에 이용된 총 샘플수는 총 132개였다. 수집된 데이터는 t-test를 이응하여 분석 하였다. T-test의 분석결과 Seip 직물들은 검게된 직물군과 검게되지 않은 직물군 사이에서 유의한 손상 정도의 차이를 볼 수 있었으며 반면에 조직에 따른 분류에서는 유의한 차이를 볼 수 없었다. IBFM의 평군점수를 비교하면 검게된 직물군보다 검게되지 않은 직물군이 더 높은 점수를 나타내어 후자가 더 많이 손상된 것으로 보여졌다. 7개의 손상형태를 독칩적으로 보았을 때 섬유속의 분리정도 (degree of bundle separation) , 횡금(transverse crack) , 그리고 횡선 (transverse striations) 이 검게된 직물군과 검게 되지 않은 직물군 사이에서, 섬유속의 분리정도, 종금(lengthwise striations)과 횡금이 얼터네이트와 기타조직 사이에서 각각 유의한 차이를 보였다.